On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@xxxxxxxxx> wrote: > From: Sandeep Jain <Sandeep_Jain@xxxxxxxxxx> (...) > +- ti,pixel-clock-edge : Selects Pixel Clock Edge. > + Possible values are "<1>" or "<0>". > + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the > + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is > + strobed on the Falling edge of the PCLK. > + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge > + value is not touched and given by hardware pin strapping. Please use the existing binding in Documentation/devicetree/bindings/display/panel/display-timing.txt for this: pixelclk-active = [<0>|<1>]; Please reference the above document in your binding. Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel