Hi Rob
Had one question on below comment. Can you please help to clarify?
Thanks
Abhinav
On 2018-10-04 12:42, Abhinav Kumar wrote:
Hi Rob
Thanks for the review. Will copy the DT list in the next patchset.
Some comments inline.
Thanks
Abhinav
On 2018-10-04 12:01, Rob Herring wrote:
If you want DT bindings reviewed, you have to cc the DT list. (Or wait
for Sean Paul to ping me on IRC)
On Fri, Sep 28, 2018 at 7:39 PM Abhinav Kumar
<abhinavk@xxxxxxxxxxxxxx> wrote:
Add the device tree bindings for Truly NT35597 panel driver. This
panel
driver supports both single DSI and dual DSI.
By driver, you means drives panel timing signals or a Linux driver?
The former is okay, the latter is not.
Yes, I mean it driver panel timing signals.
However, this patch series supports only dual DSI.
Changes in v9:
- None
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/truly,nt35597.txt | 60
++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/truly,nt35597.txt
diff --git
a/Documentation/devicetree/bindings/display/truly,nt35597.txt
b/Documentation/devicetree/bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000..46b29eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt
@@ -0,0 +1,60 @@
+Truly model NT35597 DSI display driver
+
+The Truly NT35597 is a generic display driver, currently only
configured
+for use in the 2K display on the Qualcomm SDM845.
So this is for *all* SDM845 based boards?
This is for SDM845 MTP board. Let me mention that as well.
+
+Required properties:
+- compatible: should be "truly,nt35597-2K-display"
+- vdda-supply: phandle of the regulator that provides the supply
voltage
+ Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply
voltage
+ for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply
voltage
+ for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl,
pinctrl-names
+ (active low)
+- mode-gpios: phandle of the gpio for choosing the mode of the
display
+ for single DSI or Dual DSI
+ (active high)
active high doesn't really make sense for this.
Alright, will remove this.
Here you would prefer us to make this GPIO active low right?
OR you were just mentioning that I can remove the active high
documentation?
+ This should be low for dual DSI and high for single DSI mode
+- ports: This device has two video ports driven by two DSIs. Their
connections
+ are modelled using the OF graph bindings specified in
modeled
+ Documentation/devicetree/bindings/graph.txt.
+ - port@0: DSI input port driven by master DSI
+ - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+ dsi@ae94000 {
+ panel@0 {
+ compatible = "truly,nt35597-2K-display";
+ reg = <0>;
+ vdda-supply = <&pm8998_l14>;
+ vdispp-supply = <&lab_regulator>;
+ vdispn-supply = <&ibb_regulator>;
+ pinctrl-names = "default", "suspend";
+ pinctrl-0 = <&dpu_dsi_active>;
+ pinctrl-1 = <&dpu_dsi_suspend>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel0_in: endpoint {
+ remote-endpoint =
<&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel1_in: endpoint {
+ remote-endpoint =
<&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
