On Thu, Oct 04, 2018 at 08:29:53PM -0400, Lyude Paul wrote:
> Since we need to be able to allow DPMS on->off prop changes after an MST
> port has disappeared from the system, we need to be able to make sure we
> can compute a config for the resulting atomic commit. Currently this is
> impossible when the port has disappeared, since the VCPI slot searching
> we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
>
> Since the only commits we want to allow on no-longer-present MST ports
> are ones that shut off display hardware, we already know that no VCPI
> allocations are needed. So, hardcode the VCPI slot count to 0 when
> intel_dp_mst_compute_config() is called on an MST port that's gone.
>
> Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
> drivers/gpu/drm/i915/intel_dp_mst.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index fcb9b87b9339..a366f32b048a 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -42,7 +42,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
> to_intel_connector(conn_state->connector);
> struct drm_atomic_state *state = pipe_config->base.state;
> int bpp;
> - int lane_count, slots;
> + int lane_count, slots = 0;
> const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> int mst_pbn;
> bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
> @@ -76,11 +76,16 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
> mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> pipe_config->pbn = mst_pbn;
>
> - slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
> - connector->port, mst_pbn);
> - if (slots < 0) {
> - DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
> - return false;
> + if (!connector->mst_port_gone) {
Wondered why you don't need this for nouveau/amdgpu, but a bit of grepping
later says they don't even bother to check that in their atomic_check
functions. So if a multi-stream cable runs out of vcpi slots, they just
toss up their hands, atomic be damned :-(
With the s/mst_port_gone/READ_ONCE(!conn->registered)/ bikeshed:
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
I wondered a bit whether ths fuction shouldn't just return 0 if the
connector is gone, but we'd need to audit/fix other drivers first.
-Daniel
> + slots = drm_dp_atomic_find_vcpi_slots(state,
> + &intel_dp->mst_mgr,
> + connector->port,
> + mst_pbn);
> + if (slots < 0) {
> + DRM_DEBUG_KMS("failed finding vcpi slots:%d\n",
> + slots);
> + return false;
> + }
> }
>
> intel_link_compute_m_n(bpp, lane_count,
> --
> 2.17.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
