Hi, Bibby: Applied to mediatek-drm-next-4.20 [1], thanks. [1] https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-4.20 Regards, CK On Wed, 2018-10-03 at 11:41 +0800, Bibby Hsieh wrote: > In order to support HDMI on mt2701, > we have to make some modifications. > 1) Add the HDMI driver. > 2) Add the DPI driver. > 3) Add a mechanism that config output component by dts. > > Change since v4: > - move some change from patch9 to patch7 > > Change since v3: > - Remove drm/mediatek: config component output by device node port > patch, we will push another patches to flexibly config the component output. > - fixup the return value > - replace dpi->power_ctl and power_sta with reference count mechanism. > - move the common function to mtk_hdmi_phy.c/h > > Changes since v2: > - Fix the typo in commit message. > - Remove const of reg_h_fre_con in the mtk_dpi_conf struct > - Remove unused error log > - Use lower casee for hex number > - Use common API which defined in mtk_hdmi_phy.c to reduce code size > - Implemet the enable/disable of phy_pll_ops the same as 8173 > - Move the common header to mtk_hdmi_phy.h > - Remove the including of debugfs.h > NOTE: > - add description about thecoponent output in the binding document in v4. > > Changes since v1: > - Separate some patches to independent patch. > - add DISP_REG_CONFIG_DSI_SEL and DISP_REG_CONFIG_DPI_SEL > configuration in the condition of BLS&DPI0 connection. > > Changes since v0: > - Correct some typos in commit message. > - Fixup the build warning (tmp variable didn't be initialized) > > Bibby Hsieh (2): > drm/mediatek: implement connection from BLS to DPI0 > drm/mediatek: add a error return value when clock driver has been > prepared > > chunhui dai (9): > drm/mediatek: add refcount for DPI power on/off > drm/mediatek: move hardware register to node data > drm/mediatek: adjust EDGE to match clock and data > drm/mediatek: add clock factor for different IC > drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge > drm/mediatek: add dpi driver for mt2701 and mt7623 > drm/mediatek: separate hdmi phy to different file > drm/mediatek: add support for SPDIF audio in HDMI > drm/mediatek: add hdmi driver for MT2701 and MT7623 > > drivers/gpu/drm/mediatek/Makefile | 5 +- > drivers/gpu/drm/mediatek/mtk_dpi.c | 131 ++++++++------ > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 2 +- > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 14 +- > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 + > drivers/gpu/drm/mediatek/mtk_hdmi.c | 15 +- > drivers/gpu/drm/mediatek/mtk_hdmi.h | 2 +- > drivers/gpu/drm/mediatek/mtk_hdmi_phy.c | 235 +++++++++++++++++++++++++ > drivers/gpu/drm/mediatek/mtk_hdmi_phy.h | 60 +++++++ > drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 212 ++++++++++++++++++++++ > drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 226 +----------------------- > 12 files changed, 627 insertions(+), 279 deletions(-) > create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c > create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h > create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
