Moved gmbus_mutex below intel_gmbus and added comments.
Rebased to drm-intel-next-queued.
----------------------------------------------------------------
GMBUS has several ports and each has it's own corresponding
I2C adpater. When multiple I2C adapters call gmbus_xfer() at
the same time there is a race condition in using the underlying
GMBUS controller. Fixing this by adding a mutex lock when calling
gmbus_xfer().
Signed-off-by: Yufeng Shen <miletus@xxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++
drivers/gpu/drm/i915/intel_i2c.c | 24 +++++++++++++++++-------
2 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 563d24e..40027de 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -313,6 +313,14 @@ typedef struct drm_i915_private {
u32 reg0;
} *gmbus;
+ /** Multiple intel_gmbus i2c adapters are actually sharing the same
+ underlying GMBUS controller. i2c core protects concurrent use of
+ the same i2c adapter but is not aware of the concurrent use of the
+ underlying GMBUS controller. gmbus_mutex is used to prevent the race
+ condition from the perspective of GMBUS controller.
+ */
+ struct mutex gmbus_mutex;
+
struct pci_dev *bridge_dev;
struct intel_ring_buffer ring[I915_NUM_RINGS];
uint32_t next_seqno;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d30cccc..fc75d71 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -233,11 +233,15 @@ gmbus_xfer(struct i2c_adapter *adapter,
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = adapter->algo_data;
- int i, reg_offset;
+ int i, reg_offset, ret;
- if (bus->force_bit)
- return intel_i2c_quirk_xfer(dev_priv,
+ mutex_lock(&dev_priv->gmbus_mutex);
+
+ if (bus->force_bit) {
+ ret = intel_i2c_quirk_xfer(dev_priv,
bus->force_bit, msgs, num);
+ goto out;
+ }
reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
@@ -321,7 +325,8 @@ done:
* start of the next xfer, till then let it sleep.
*/
I915_WRITE(GMBUS0 + reg_offset, 0);
- return i;
+ ret = i;
+ goto out;
timeout:
DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
@@ -331,9 +336,12 @@ timeout:
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
if (!bus->force_bit)
- return -ENOMEM;
-
- return intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num);
+ ret = -ENOMEM;
+ else
+ ret = intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num);
+out:
+ mutex_unlock(&dev_priv->gmbus_mutex);
+ return ret;
}
static u32 gmbus_func(struct i2c_adapter *adapter)
@@ -380,6 +388,8 @@ int intel_setup_gmbus(struct drm_device *dev)
if (dev_priv->gmbus == NULL)
return -ENOMEM;
+ mutex_init(&dev_priv->gmbus_mutex);
+
for (i = 0; i < GMBUS_NUM_PORTS; i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
--
1.7.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
