On Thu, Sep 13, 2018 at 11:54:50AM +0200, jacopo mondi wrote: > Hi Sakari, > > On Thu, Sep 13, 2018 at 12:29:19AM +0300, Sakari Ailus wrote: > > Hello everyone, > > > > I've long thought the V4L2 fwnode framework requires some work (it's buggy > > and it does not adequately serve common needs). This set should address in > > particular these matters: > > > > - Most devices support a particular media bus type but the V4L2 fwnode > > framework was not able to use such information, but instead tried to > > guess the bus type with varying levels of success while drivers > > generally ignored the results. This patchset makes that possible --- > > setting a bus type enables parsing configuration for only that bus. > > Failing that check results in returning -ENXIO to be returned. > > > > - Support specifying default configuration. If the endpoint has no > > configuration, the defaults set by the driver (as documented in DT > > bindings) will prevail. Any available configuration will still be read > > from the endpoint as one could expect. A common use case for this is > > e.g. the number of CSI-2 lanes. Few devices support lane mapping, and > > default 1:1 mapping is provided in absence of a valid default or > > configuration read OF. > > > > - Debugging information is greatly improved. > > > > - Recognition of the differences between CSI-2 D-PHY and C-PHY. All > > currently supported hardware (or at least drivers) is D-PHY only, so > > this change is still easy. > > > > The smiapp driver is converted to use the new functionality. This patchset > > does not address remaining issues such as supporting setting defaults for > > e.g. bridge drivers with multiple ports, but with Steve Longerbeam's > > patchset we're much closer to that goal. I've rebased this set on top of > > Steve's. Albeit the two deal with the same files, there were only a few > > trivial conflicts. > > > > Note that I've only tested parsing endpoints for the CSI-2 bus (no > > parallel IF hardware). Jacopo has tested an earlier version of the set > > with a few changes to the parallel bus handling compared to this one. > > I've tested on parallel bus with CEU and MT9V111. > > You can add my: > Tested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > to this version too. Thanks! I'll put your ack on the DT binding documentation patch as Tested-by: isn't really meaningful in that case. -- Sakari Ailus e-mail: sakari.ailus@xxxxxx _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
