On Wed, Sep 12, 2018 at 10:55 PM Jernej Škrabec <jernej.skrabec@xxxxxxxx> wrote:
>
> Dne sreda, 12. september 2018 ob 14:20:08 CEST je Chen-Yu Tsai napisal(a):
> > On Wed, Sep 5, 2018 at 1:46 AM Jernej Škrabec <jernej.skrabec@xxxxxxxx>
> wrote:
> > > Dne torek, 04. september 2018 ob 11:04:21 CEST je Chen-Yu Tsai napisal(a):
> > > > On Sun, Sep 2, 2018 at 3:27 PM Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > >
> > > wrote:
> > > > > Support for mixer0, mixer1, writeback and rotation units is added.
> > > > >
> > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> > > > > ---
> > > > >
> > > > > drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 65
> > > > > ++++++++++++++++++++++++++++
> > > > > drivers/clk/sunxi-ng/ccu-sun8i-de2.h | 1 +
> > > > > 2 files changed, 66 insertions(+)
> > > > >
> > > > > diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > > > b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c index
> > > > > bae5ee67a797..4535c1c27d27
> > > > > 100644
> > > > > --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > > > +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > > > @@ -31,6 +31,8 @@ static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1",
> > > > > "bus-de",>
> > > > >
> > > > > 0x04, BIT(1), 0);
> > > > >
> > > > > static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
> > > > >
> > > > > 0x04, BIT(2), 0);
> > > > >
> > > > > +static SUNXI_CCU_GATE(bus_rot_clk, "bus-rot", "bus-de",
> > > > > + 0x04, BIT(3), 0);
> > > > >
> > > > > static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
> > > > >
> > > > > 0x00, BIT(0), CLK_SET_RATE_PARENT);
> > > > >
> > > > > @@ -38,6 +40,8 @@ static SUNXI_CCU_GATE(mixer1_clk, "mixer1",
> > > > > "mixer1-div",>
> > > > >
> > > > > 0x00, BIT(1), CLK_SET_RATE_PARENT);
> > > > >
> > > > > static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
> > > > >
> > > > > 0x00, BIT(2), CLK_SET_RATE_PARENT);
> > > > >
> > > > > +static SUNXI_CCU_GATE(rot_clk, "rot", "rot-div",
> > > > > + 0x00, BIT(3), CLK_SET_RATE_PARENT);
> > > > >
> > > > > static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
> > > > >
> > > > > CLK_SET_RATE_PARENT);
> > > > >
> > > > > @@ -45,6 +49,8 @@ static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div",
> > > > > "de",
> > > > > 0x0c, 4, 4,>
> > > > >
> > > > > CLK_SET_RATE_PARENT);
> > > > >
> > > > > static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
> > > > >
> > > > > CLK_SET_RATE_PARENT);
> > > > >
> > > > > +static SUNXI_CCU_M(rot_div_clk, "rot-div", "de", 0x0c, 0x0c, 4,
> > > > > + CLK_SET_RATE_PARENT);
> > > > >
> > > > > static SUNXI_CCU_M(mixer0_div_a83_clk, "mixer0-div", "pll-de", 0x0c,
> > > > > 0,
> > > > > 4,
> > > > >
> > > > > CLK_SET_RATE_PARENT);
> > > > >
> > > > > @@ -53,6 +59,24 @@ static SUNXI_CCU_M(mixer1_div_a83_clk,
> > > > > "mixer1-div",
> > > > > "pll-de", 0x0c, 4, 4,>
> > > > >
> > > > > static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
> > > > >
> > > > > CLK_SET_RATE_PARENT);
> > > > >
> > > > > +static struct ccu_common *sun50i_h6_de3_clks[] = {
> > > > > + &mixer0_clk.common,
> > > > > + &mixer1_clk.common,
> > > > > + &wb_clk.common,
> > > > > +
> > > > > + &bus_mixer0_clk.common,
> > > > > + &bus_mixer1_clk.common,
> > > > > + &bus_wb_clk.common,
> > > > > +
> > > > > + &mixer0_div_clk.common,
> > > > > + &mixer1_div_clk.common,
> > > > > + &wb_div_clk.common,
> > > > > +
> > > > > + &bus_rot_clk.common,
> > > > > + &rot_clk.common,
> > > > > + &rot_div_clk.common,
> > > > > +};
> > > > > +
> > > > >
> > > > > static struct ccu_common *sun8i_a83t_de2_clks[] = {
> > > > >
> > > > > &mixer0_clk.common,
> > > > > &mixer1_clk.common,
> > > > >
> > > > > @@ -92,6 +116,26 @@ static struct ccu_common *sun8i_v3s_de2_clks[] = {
> > > > >
> > > > > &wb_div_clk.common,
> > > > >
> > > > > };
> > > > >
> > > > > +static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
> > > > > + .hws = {
> > > > > + [CLK_MIXER0] = &mixer0_clk.common.hw,
> > > > > + [CLK_MIXER1] = &mixer1_clk.common.hw,
> > > > > + [CLK_WB] = &wb_clk.common.hw,
> > > > > + [CLK_ROT] = &rot_clk.common.hw,
> > > > > +
> > > > > + [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
> > > > > + [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
> > > > > + [CLK_BUS_WB] = &bus_wb_clk.common.hw,
> > > > > + [CLK_BUS_ROT] = &bus_rot_clk.common.hw,
> > > > > +
> > > > > + [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
> > > > > + [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
> > > > > + [CLK_WB_DIV] = &wb_div_clk.common.hw,
> > > > > + [CLK_ROT_DIV] = &rot_div_clk.common.hw,
> > > > > + },
> > > > > + .num = 12,
> > > >
> > > > It's best not to openly code these. It is error prone, like having
> > > > an index beyond .num, which then never gets registered.
> > > >
> > > > Instead, please update CLK_NUMBERS and use that instead.
> > > > sunxi_ccu_probe()
> > > > can handle holes in .hws.
> > >
> > > I'm not sure this will work. All newly introduced indices are at the end,
> > > so other arrays will still have same length (hole at the end). You will
> > > just claim that arrays are larger than they really are, which means bad
> > > things.
> > >
> > > But I take any other suggestion. I really can't think of better solution.
> >
> > Then maybe have macros for both cases instead?
> > CLK_NUMBER_WITH_ROT / CLK_NUMBER_WITHOUT_ROT?
>
> That sounds reasonable. Do you want separate patch which renames original
> macro CLK_NUMBER to CLK_NUMBER_WITHOUT_ROT?
I don't think that's necessary. Just mention the name change in the changelog,
and justifying it by the addition of the ROT clocks.
Thanks
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
