Hi Jacopo,
On Friday, 7 September 2018 21:19:38 EEST jacopo mondi wrote:
> On Tue, Sep 04, 2018 at 03:10:17PM +0300, Laurent Pinchart wrote:
> > The rcar_du_crtc_get() function is always immediately followed by a call
> > to rcar_du_crtc_setup(). Call the later from the former to simplify the
> > code, and add a comment to explain how the get and put calls are
> > balanced.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > ---
> >
> > drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 107 +++++++++++++++-------------
> > 1 file changed, 56 insertions(+), 51 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 4c9572d7ea89..1d81eb244441
> > 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > @@ -66,39 +66,6 @@ static void rcar_du_crtc_clr_set(struct rcar_du_crtc
> > *rcrtc, u32 reg,
> > rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set);
> > }
> >
> > -static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
> > -{
> > - int ret;
> > -
> > - ret = clk_prepare_enable(rcrtc->clock);
> > - if (ret < 0)
> > - return ret;
> > -
> > - ret = clk_prepare_enable(rcrtc->extclock);
> > - if (ret < 0)
> > - goto error_clock;
> > -
> > - ret = rcar_du_group_get(rcrtc->group);
> > - if (ret < 0)
> > - goto error_group;
> > -
> > - return 0;
> > -
> > -error_group:
> > - clk_disable_unprepare(rcrtc->extclock);
> > -error_clock:
> > - clk_disable_unprepare(rcrtc->clock);
> > - return ret;
> > -}
> > -
> > -static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
>
> For what I see, rcar_du_crtc_stop() is also called once just before
> _put(). Have you considered doing with them what you've done with
> _get() and _setup() ?
I have, but given that we have an explicit get(); start(); sequence in
rcar_du_crtc_atomic_enable(), I'd rather keep the stop(); put(); sequence in
rcar_du_crtc_atomic_disable().
> > -{
> > - rcar_du_group_put(rcrtc->group);
> > -
> > - clk_disable_unprepare(rcrtc->extclock);
> > - clk_disable_unprepare(rcrtc->clock);
> > -}
> > -
> >
> > /*
> > ------------------------------------------------------------------------
> > ----->
> > * Hardware Setup
> > */
> >
> > @@ -546,6 +513,51 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc
> > *rcrtc)>
> > drm_crtc_vblank_on(&rcrtc->crtc);
> >
> > }
> >
> > +static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
> > +{
> > + int ret;
> > +
> > + /*
> > + * Guard against double-get, as the function is called from both the
> > + * .atomic_enable() and .atomic_begin() handlers.
> > + */
> > + if (rcrtc->initialized)
> > + return 0;
> > +
> > + ret = clk_prepare_enable(rcrtc->clock);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = clk_prepare_enable(rcrtc->extclock);
> > + if (ret < 0)
> > + goto error_clock;
> > +
> > + ret = rcar_du_group_get(rcrtc->group);
> > + if (ret < 0)
> > + goto error_group;
> > +
> > + rcar_du_crtc_setup(rcrtc);
> > + rcrtc->initialized = true;
> > +
> > + return 0;
> > +
> > +error_group:
> > + clk_disable_unprepare(rcrtc->extclock);
> > +error_clock:
> > + clk_disable_unprepare(rcrtc->clock);
> > + return ret;
> > +}
> > +
> > +static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
> > +{
> > + rcar_du_group_put(rcrtc->group);
> > +
> > + clk_disable_unprepare(rcrtc->extclock);
> > + clk_disable_unprepare(rcrtc->clock);
> > +
> > + rcrtc->initialized = false;
> > +}
> > +
> >
> > static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
> > {
> >
> > bool interlaced;
> >
> > @@ -639,16 +651,7 @@ static void rcar_du_crtc_atomic_enable(struct
> > drm_crtc *crtc,>
> > {
> >
> > struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> >
> > - /*
> > - * If the CRTC has already been setup by the .atomic_begin() handler we
> > - * can skip the setup stage.
> > - */
> > - if (!rcrtc->initialized) {
> > - rcar_du_crtc_get(rcrtc);
> > - rcar_du_crtc_setup(rcrtc);
> > - rcrtc->initialized = true;
> > - }
> > -
> > + rcar_du_crtc_get(rcrtc);
> >
> > rcar_du_crtc_start(rcrtc);
> >
> > }
> >
> > @@ -667,7 +670,6 @@ static void rcar_du_crtc_atomic_disable(struct
> > drm_crtc *crtc,>
> > }
> > spin_unlock_irq(&crtc->dev->event_lock);
> >
> > - rcrtc->initialized = false;
> >
> > rcrtc->outputs = 0;
> >
> > }
> >
> > @@ -680,14 +682,17 @@ static void rcar_du_crtc_atomic_begin(struct
> > drm_crtc *crtc,>
> > /*
> >
> > * If a mode set is in progress we can be called with the CRTC
disabled.
> >
> > - * We then need to first setup the CRTC in order to configure planes.
> > - * The .atomic_enable() handler will notice and skip the CRTC setup.
> > + * We thus need to first get and setup the CRTC in order to configure
> > + * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
> > + * kept awake until the .atomic_enable() call that will follow. The get
> > + * operation in .atomic_enable() will in that case be a no-op, and the
> > + * CRTC will be put later in .atomic_disable().
> > + *
> > + * If a mode set is not in progress the CRTC is enabled, and the
> > + * following get call will be a no-op. There is thus no need to belance
> > + * it in .atomic_flush() either.
> >
> > */
> >
> > - if (!rcrtc->initialized) {
> > - rcar_du_crtc_get(rcrtc);
> > - rcar_du_crtc_setup(rcrtc);
> > - rcrtc->initialized = true;
> > - }
> > + rcar_du_crtc_get(rcrtc);
> >
> > if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
> >
> > rcar_du_vsp_atomic_begin(rcrtc);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
