Add the nodes to describe the Adreno GPU and GMU devices.
Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 121 +++++++++++++++++++++++++++
1 file changed, 121 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb3c995..10db0ceb3699 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -192,6 +192,59 @@
method = "smc";
};
+gpu_opp_table: adreno-opp-table {
+ compatible = "operating-points-v2-qcom-level";
+
+ opp-710000000 {
+ opp-hz = /bits/ 64 <710000000>;
+ qcom,level = <416>;
+ };
+
+ opp-675000000 {
+ opp-hz = /bits/ 64 <675000000>;
+ qcom,level = <384>;
+ };
+
+ opp-596000000 {
+ opp-hz = /bits/ 64 <596000000>;
+ qcom,level = <320>;
+ };
+
+ opp-520000000 {
+ opp-hz = /bits/ 64 <520000000>;
+ qcom,level = <256>;
+ };
+
+ opp-414000000 {
+ opp-hz = /bits/ 64 <414000000>;
+ qcom,level = <192>;
+ };
+
+ opp-342000000 {
+ opp-hz = /bits/ 64 <342000000>;
+ qcom,level = <128>;
+ };
+
+ opp-257000000 {
+ opp-hz = /bits/ 64 <257000000>;
+ qcom,level = <64>;
+ };
+ };
+
+ gmu_opp_table: adreno-gmu-opp-table {
+ compatible = "operating-points-v2-qcom-level";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ qcom,level = <128>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ qcom,level = <48>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -323,5 +376,73 @@
status = "disabled";
};
};
+
+ adreno_smmu: adreno-smmu@5040000 {
+ compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+ reg = <0x5040000 0x10000>;
+ #iommu-cells = <1>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_CFG_AHB_CLK>;
+ clock-names = "bus", "iface";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ };
+
+ gpu@5000000 {
+ compatible = "qcom,adreno-630.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0x5000000 0x40000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ /*
+ * Look ma, no clocks! The GPU clocks and power are
+ * controlled entirely by the GMU
+ */
+
+ interrupts = <0 300 0>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ iommus = <&adreno_smmu 0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+ };
+
+ gmu: gmu@506a000 {
+ compatible="qcom,adreno-gmu";
+
+ reg = <0x506a000 0x30000>,
+ <0xb280000 0x10000>,
+ <0xb480000 0x10000>;
+ reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ iommus = <&adreno_smmu 5>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+ };
};
};
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
