Hi Heiko, On 08/21/2018 04:05 PM, Heiko Stuebner wrote: > The Rockchip DSI driver was separate till now, not using the common > bridge driver that was introduced a bit later. So this series migrates > over to use that common bridge driver and then also adds support for > dual-dsi to both the bridge and Rockchip glue code. > > The bridge-migration itself is based on Nickeys earlier v8 > work, but adapted to current kernels and with a new split between probe > and bind, so that we do not create and drop the dsi-host on each deferred > bind attempt. > > changes in v2: > - rebase against newer drm code (dsi-bridge+rockchip changes) > - add SPDX header to new glue driver > - expect regular interface lanes from panel (like 4) not the double number > Similar to tegra > - keep links to both master and slave > changes in v3: > - don't defer in bridge_attach, instead add ability to check for finalized > panel attachement, for example in bind > - address bridge-conversion comments from Andrzej: > - include ordering > - moved hwaccess from mode_set to enable callback > - move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps) > - limited slave settings to dw_mipi_dsi_set_slave > - address dual-dsi comments from Philippe: > - remove unneeded separate variables > - remove unneeded second slave settings > - disable slave before master > - lane-sum calculation comments > changes in v4: > - rebase against some legacy rockchip-dsi changes > - add dsi-component only after panel has attached to dsi host > This solves quite some concurrency problems that happen when trying > to determine dsi-panel availability > changes in v5: > - use driver-internal method to find second host > - drop of-graph based dsi method for it FYI, Yannick tested successfully the v5 version on stm32 boards. Note that drm stm32 drivers do not use bind/unbind & dual-dsi so this email is simply to share with you this minor information: "v5 patch does not break stm32 dsi", hope it helps a little. Many thanks, Philippe :-) > > Unchanged from review comments: > - kept dw_mipi_dsi_bind, as the dsi->bridge member is only part of the > bridge drivers struct, so not accessible from glue drivers > - kept dual-dsi handling that mimicks tegra > > > Heiko Stuebner (4): > drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to > __dw_mipi_dsi_remove > drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from > dw_mipi_dsi_bind > drm/bridge/synopsys: dsi: add ability to have glue-specific attach and > detach > drm/rockchip: dsi: add dual mipi support > > Nickey Yang (3): > dt-bindings: display: rockchip: update DSI controller > drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver > drm/bridge/synopsys: dsi: add dual-dsi support > > .../display/rockchip/dw_mipi_dsi_rockchip.txt | 23 +- > drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 114 +- > drivers/gpu/drm/rockchip/Kconfig | 2 +- > drivers/gpu/drm/rockchip/Makefile | 2 +- > .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1044 +++++++++++++ > drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 ----------------- > drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +- > drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 +- > drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 + > drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 4 + > drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 + > include/drm/bridge/dw_mipi_dsi.h | 14 +- > 12 files changed, 1182 insertions(+), 1379 deletions(-) > create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c > delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
