Den 21.08.2018 10.44, skrev Daniel Vetter:
On Mon, Aug 20, 2018 at 11:44:56PM -0700, John Stultz wrote:
On Tue, Jul 3, 2018 at 9:03 AM, Noralf Trønnes <noralf@xxxxxxxxxxx> wrote:
This switches the CMA helper drivers that use its fbdev emulation over
to the generic fbdev emulation. It's the first phase of using generic
fbdev. A later phase will use DRM client callbacks for the
lastclose/hotplug/remove callbacks.
There are currently 2 fbdev init/fini functions:
- drm_fb_cma_fbdev_init/drm_fb_cma_fbdev_fini
- drm_fbdev_cma_init/drm_fbdev_cma_fini
This is because the work on generic fbdev came up during a fbdev
refactoring and thus wasn't completed. No point in completing that
refactoring when drivers will soon move to drm_fb_helper_generic_probe().
tinydrm uses drm_fb_cma_fbdev_init_with_funcs().
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
drivers/gpu/drm/drm_fb_cma_helper.c | 360 +++++-------------------------------
include/drm/drm_fb_cma_helper.h | 3 -
2 files changed, 42 insertions(+), 321 deletions(-)
...
-static int drm_fbdev_cma_defio_init(struct fb_info *fbi,
- struct drm_gem_cma_object *cma_obj)
-{
- struct fb_deferred_io *fbdefio;
- struct fb_ops *fbops;
-
- /*
- * Per device structures are needed because:
- * fbops: fb_deferred_io_cleanup() clears fbops.fb_mmap
- * fbdefio: individual delays
- */
- fbdefio = kzalloc(sizeof(*fbdefio), GFP_KERNEL);
- fbops = kzalloc(sizeof(*fbops), GFP_KERNEL);
- if (!fbdefio || !fbops) {
- kfree(fbdefio);
- kfree(fbops);
- return -ENOMEM;
- }
-
- /* can't be offset from vaddr since dirty() uses cma_obj */
- fbi->screen_buffer = cma_obj->vaddr;
- /* fb_deferred_io_fault() needs a physical address */
- fbi->fix.smem_start = page_to_phys(virt_to_page(fbi->screen_buffer));
-
- *fbops = *fbi->fbops;
- fbi->fbops = fbops;
-
- fbdefio->delay = msecs_to_jiffies(DEFAULT_FBDEFIO_DELAY_MS);
- fbdefio->deferred_io = drm_fb_helper_deferred_io;
- fbi->fbdefio = fbdefio;
- fb_deferred_io_init(fbi);
- fbi->fbops->fb_mmap = drm_fbdev_cma_deferred_io_mmap;
-
- return 0;
-}
-
-static void drm_fbdev_cma_defio_fini(struct fb_info *fbi)
-{
- if (!fbi->fbdefio)
- return;
-
- fb_deferred_io_cleanup(fbi);
- kfree(fbi->fbdefio);
- kfree(fbi->fbops);
-}
-
-static int
-drm_fbdev_cma_create(struct drm_fb_helper *helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct drm_fbdev_cma *fbdev_cma = to_fbdev_cma(helper);
- struct drm_device *dev = helper->dev;
- struct drm_gem_cma_object *obj;
- struct drm_framebuffer *fb;
- unsigned int bytes_per_pixel;
- unsigned long offset;
- struct fb_info *fbi;
- size_t size;
- int ret;
-
- DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n",
- sizes->surface_width, sizes->surface_height,
- sizes->surface_bpp);
-
- bytes_per_pixel = DIV_ROUND_UP(sizes->surface_bpp, 8);
- size = sizes->surface_width * sizes->surface_height * bytes_per_pixel;
- obj = drm_gem_cma_create(dev, size);
- if (IS_ERR(obj))
- return -ENOMEM;
-
- fbi = drm_fb_helper_alloc_fbi(helper);
- if (IS_ERR(fbi)) {
- ret = PTR_ERR(fbi);
- goto err_gem_free_object;
- }
-
- fb = drm_gem_fbdev_fb_create(dev, sizes, 0, &obj->base,
- fbdev_cma->fb_funcs);
- if (IS_ERR(fb)) {
- dev_err(dev->dev, "Failed to allocate DRM framebuffer.\n");
- ret = PTR_ERR(fb);
- goto err_fb_info_destroy;
- }
-
- helper->fb = fb;
-
- fbi->par = helper;
- fbi->flags = FBINFO_FLAG_DEFAULT;
- fbi->fbops = &drm_fbdev_cma_ops;
-
- drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->format->depth);
- drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
-
- offset = fbi->var.xoffset * bytes_per_pixel;
- offset += fbi->var.yoffset * fb->pitches[0];
-
- dev->mode_config.fb_base = (resource_size_t)obj->paddr;
- fbi->screen_base = obj->vaddr + offset;
- fbi->fix.smem_start = (unsigned long)(obj->paddr + offset);
Hey Noralf, all,
I've been digging for a bit on the regression that this patch has
tripped on the HiKey board as reported here:
https://lkml.org/lkml/2018/8/16/81
The first issue was that the kirin driver was setting
mode_config.max_width/height = 2048, which was causing errors as the
the requested resolution was 1920x2160 (due to surfaceflinger
requesting y*2 for page flipping). This was relatively simple enough
to figure out and fix, but bumping the values up on its own didn't
seem to resolve the issue entirely, as I started to see hard hangs on
bootup when userspace started using the emulated fbdev device.
After confirming reverting the patch here worked around it, I started
digging through what might be different, and I think I've found it.
In the drm_fbdev_cma_create() function above, we set the
fbi->fix.smem_start value, where as in drm_fb_helper_generic_probe(),
which now replaces that, we don't set smem_start value at all.
Since we don't have a drm_gem_cma_object reference in
drm_fb_helper_generic_probe(), I instead added:
fbi->fix.smem_start = page_to_phys(virt_to_page(fbi->screen_buffer));
And that got things working!
So yea, I wanted to figure out if we are just missing the line above
in drm_fb_helper_generic_probe()? Or if the kirin driver should be
setting the fix.smem_start in some other fashion?
With the generic helpers we can't use the generic fb_mmap() implementation
in fbdev/core/fbmem.c anymore. Instead Noralf added a generic fb_mmap
fb_ops callback in drm_fbdev_fb_mmap, which you're supposed to use. Can
you pls double-check that this is wired up correctly for kirin?
At least I don't see any other place where we use smem_start in the fbdev
code. It does get copied to userspace, but userspace should never use
that.
I googled 'FBIOGET_FSCREENINFO smem_start' and came across info[1]
about the Mali blob using it and HiKey seems to have a Mali GPU:
00:17 <ssvb> BorgCuba:
the mali blob is supposed to open the framebuffer device,
get "smem_start" and try to map this memory via MALI_IOC_MEM_MAP_EXT ioctl
Could this be the problem here?
Noralf.
[1] https://irclog.whitequark.org/linux-rockchip/2015-12-22
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
