Hi Ulrich,
Thank you for the patch.
On Tuesday, 14 August 2018 16:49:56 EEST Ulrich Hecht wrote:
> Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver.
>
> Based on patch by Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx>.
>
> Signed-off-by: Ulrich Hecht <uli+renesas@xxxxxxxx>
> ---
> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 17 ++++++-----------
> drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++
> drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 +
> drivers/gpu/drm/rcar-du/rcar_du_group.c | 3 ++-
> 4 files changed, 35 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index cd6803a..9153e7a 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -53,14 +53,6 @@ static void rcar_du_crtc_clr(struct rcar_du_crtc *rcrtc,
> u32 reg, u32 clr) rcar_du_read(rcdu, rcrtc->mmio_offset + reg) & ~clr);
> }
>
> -static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set)
> -{
> - struct rcar_du_device *rcdu = rcrtc->group->dev;
> -
> - rcar_du_write(rcdu, rcrtc->mmio_offset + reg,
> - rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set);
> -}
> -
> static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg,
> u32 clr, u32 set)
> {
> @@ -527,7 +519,8 @@ static void rcar_du_crtc_start(struct rcar_du_crtc
> *rcrtc) * actively driven).
> */
> interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
> - rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
> + rcar_du_crtc_clr_set(rcrtc, DSYSR,
> + DSYSR_TVM_MASK | DSYSR_SCM_MASK | DSYSR_ILTS,
The ILTS bit defaults to 0 so this shouldn't be needed. However, we never
initialize the DSYSR register completely but only modify bits. It would be
safer to write all bits at init time. I'll write a separate patch.
> (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
> DSYSR_TVM_MASTER);
>
> @@ -596,7 +589,9 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc
> *rcrtc) * Select switch sync mode. This stops display operation and
> configures * the HSYNC and VSYNC signals as inputs.
> */
> - rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH);
> + rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_ILTS,
> + rcar_du_needs(rcrtc->group->dev, RCAR_DU_QUIRK_TVM_MASTER_ONLY) ?
> + DSYSR_TVM_MASTER : DSYSR_TVM_SWITCH);
Now this is a problem. The driver uses switch mode as a way to disable the
display output, as the display enable bits in the DSYSR register cover a group
of two DU channels. TVM switch mode was the only workaround I found to be able
to disable the display output. If the D3 and E3 SoCs don't implement TVM
switch mode we need a different mechanism.
> rcar_du_group_start_stop(rcrtc->group, false);
> }
> @@ -744,7 +739,7 @@ static int rcar_du_crtc_enable_vblank(struct drm_crtc
> *crtc) struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
>
> rcar_du_crtc_write(rcrtc, DSRCR, DSRCR_VBCL);
> - rcar_du_crtc_set(rcrtc, DIER, DIER_VBE);
> + rcar_du_crtc_clr_set(rcrtc, DIER, DIER_TVE | DIER_FRE, DIER_VBE);
> rcrtc->vblank_enable = true;
>
> return 0;
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 56f9472..5c2f764 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -294,6 +294,31 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = { .num_lvds = 1,
> };
>
> +static const struct rcar_du_device_info rcar_du_r8a77995_info = {
> + .gen = 3,
> + .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> + | RCAR_DU_FEATURE_EXT_CTRL_REGS
> + | RCAR_DU_FEATURE_VSP1_SOURCE,
> + .quirks = RCAR_DU_QUIRK_TVM_MASTER_ONLY,
> + .channels_mask = BIT(1) | BIT(0),
> + .routes = {
> + /* R8A77995 has two LVDS output and one RGB output. */
> + [RCAR_DU_OUTPUT_DPAD0] = {
> + .possible_crtcs = BIT(0) | BIT(1),
> + .port = 0,
> + },
> + [RCAR_DU_OUTPUT_LVDS0] = {
> + .possible_crtcs = BIT(0),
> + .port = 1,
> + },
> + [RCAR_DU_OUTPUT_LVDS1] = {
> + .possible_crtcs = BIT(1),
> + .port = 2,
> + },
> + },
> + .num_lvds = 2,
> +};
> +
> static const struct of_device_id rcar_du_of_table[] = {
> { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> @@ -307,6 +332,7 @@ static const struct of_device_id rcar_du_of_table[] = {
> { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
> { .compatible = "renesas,du-r8a77965", .data = &rcar_du_r8a77965_info },
> { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
> + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info },
> { }
> };
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.h index b3a25e8..6257405 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -32,6 +32,7 @@ struct rcar_du_device;
> #define RCAR_DU_FEATURE_VSP1_SOURCE (1 << 2) /* Has inputs from VSP1 */
>
> #define RCAR_DU_QUIRK_ALIGN_128B (1 << 0) /* Align pitches to 128 bytes
*/
> +#define RCAR_DU_QUIRK_TVM_MASTER_ONLY (1 << 1) /* Does not have TV
> switch/sync modes */
>
> /*
> * struct rcar_du_output_routing - Output routing specification
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> b/drivers/gpu/drm/rcar-du/rcar_du_group.c index d539cb2..9a0a694 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> @@ -178,7 +178,8 @@ void rcar_du_group_put(struct rcar_du_group *rgrp)
> static void __rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool
> start) {
> rcar_du_group_write(rgrp, DSYSR,
> - (rcar_du_group_read(rgrp, DSYSR) & ~(DSYSR_DRES | DSYSR_DEN)) |
> + (rcar_du_group_read(rgrp, DSYSR) &
> + ~(DSYSR_DRES | DSYSR_DEN | DSYSR_ILTS)) |
> (start ? DSYSR_DEN : DSYSR_DRES));
> }
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
