On 2018-08-14 03:00, Sean Paul wrote:
From: Sean Paul <seanpaul@xxxxxxxxxxxx>
Instead of just waiting and hoping, actually poll for the pll lock to
be
acquired. As a bonus, this should be significantly faster than the
sleep.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spanda@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index d2119ab546147..f02bdedae1e5e 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -456,6 +456,7 @@ static void ti_sn_bridge_enable(struct drm_bridge
*bridge)
{
struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
unsigned int val;
+ int ret;
/* DSI_A lane config */
val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
@@ -472,7 +473,14 @@ static void ti_sn_bridge_enable(struct drm_bridge
*bridge)
/* enable DP PLL */
regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
- usleep_range(10000, 10500); /* 10ms delay recommended by spec */
+
+ ret = regmap_read_poll_timeout(pdata->regmap, SN_DPPLL_SRC_REG, val,
+ val & DPPLL_SRC_DP_PLL_LOCK, 1000,
+ 50 * 1000);
+ if (ret) {
+ DRM_ERROR("DP_PLL_LOCK polling failed (%d)\n", ret);
+ return;
+ }
/**
* The SN65DSI86 only supports ASSR Display Authentication method and
Reviewed-by: Sandeep Panda <spanda@xxxxxxxxxxxxxx>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
