On 08.08.2018 18:08, Leonard Crestez wrote:
> The main axi clk is disabled at the end of mxsfb_crtc_mode_set_nofb and
> immediately reenabled in mxsfb_enable_controller.
>
> Avoid this by moving the handling of axi clk one level up to
> mxsfb_crtc_enable. Do the same for mxsfb_crtc_disable for simmetry
>
> This shouldn't have any functional effect.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Thanks, looks good!
Reviewed-by: Stefan Agner <stefan@xxxxxxxx>
> ---
> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> index 0abe77675b76..e4fcbb65b969 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> @@ -127,11 +127,10 @@ static void mxsfb_enable_controller(struct
> mxsfb_drm_private *mxsfb)
> u32 reg;
>
> if (mxsfb->clk_disp_axi)
> clk_prepare_enable(mxsfb->clk_disp_axi);
> clk_prepare_enable(mxsfb->clk);
> - mxsfb_enable_axi_clk(mxsfb);
>
> /* If it was disabled, re-enable the mode again */
> writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
>
> /* Enable the SYNC signals first, then the DMA engine */
> @@ -157,12 +156,10 @@ static void mxsfb_disable_controller(struct
> mxsfb_drm_private *mxsfb)
>
> reg = readl(mxsfb->base + LCDC_VDCTRL4);
> reg &= ~VDCTRL4_SYNC_SIGNALS_ON;
> writel(reg, mxsfb->base + LCDC_VDCTRL4);
>
> - mxsfb_disable_axi_clk(mxsfb);
> -
> clk_disable_unprepare(mxsfb->clk);
> if (mxsfb->clk_disp_axi)
> clk_disable_unprepare(mxsfb->clk_disp_axi);
> }
>
> @@ -206,11 +203,10 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
> /*
> * It seems, you can't re-program the controller if it is still
> * running. This may lead to shifted pictures (FIFO issue?), so
> * first stop the controller and drain its FIFOs.
> */
> - mxsfb_enable_axi_clk(mxsfb);
>
> /* Mandatory eLCDIF reset as per the Reference Manual */
> err = mxsfb_reset_block(mxsfb->base);
> if (err)
> return;
> @@ -267,23 +263,23 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
> SET_VERT_WAIT_CNT(m->crtc_vtotal - m->crtc_vsync_start),
> mxsfb->base + LCDC_VDCTRL3);
>
> writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
> mxsfb->base + LCDC_VDCTRL4);
> -
> - mxsfb_disable_axi_clk(mxsfb);
> }
>
> void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
> {
> + mxsfb_enable_axi_clk(mxsfb);
> mxsfb_crtc_mode_set_nofb(mxsfb);
> mxsfb_enable_controller(mxsfb);
> }
>
> void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
> {
> mxsfb_disable_controller(mxsfb);
> + mxsfb_disable_axi_clk(mxsfb);
> }
>
> void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
> struct drm_plane_state *state)
> {
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
