[PATCH v2] drm/cirrus: flip default from 24bpp to 16bpp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The problem with 24bpp is that it is a rather unusual depth these days,
cirrus is pretty much the only relevant device still using that, and it
is a endless source of issues.  Wayland doesn't support it at all.  Bugs
in Xorg keep showing up.

Typically either 32bpp or 16bpp are used.  Using 32bpp would limit the
resolution to 800x600 due to hardware constrains.  So lets go with 16bpp.

Also use the default depth for the framebuffer console.

Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
---
 drivers/gpu/drm/cirrus/cirrus_drv.c   | 4 ++--
 drivers/gpu/drm/cirrus/cirrus_fbdev.c | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c
index 69c4e352dd..b4f7be056c 100644
--- a/drivers/gpu/drm/cirrus/cirrus_drv.c
+++ b/drivers/gpu/drm/cirrus/cirrus_drv.c
@@ -16,11 +16,11 @@
 #include "cirrus_drv.h"
 
 int cirrus_modeset = -1;
-int cirrus_bpp = 24;
+int cirrus_bpp = 16;
 
 MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
 module_param_named(modeset, cirrus_modeset, int, 0400);
-MODULE_PARM_DESC(bpp, "Max bits-per-pixel (default:24)");
+MODULE_PARM_DESC(bpp, "Max bits-per-pixel (default:16)");
 module_param_named(bpp, cirrus_bpp, int, 0400);
 
 /*
diff --git a/drivers/gpu/drm/cirrus/cirrus_fbdev.c b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
index 32fbfba2c6..b329a54290 100644
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -271,7 +271,6 @@ int cirrus_fbdev_init(struct cirrus_device *cdev)
 {
 	struct cirrus_fbdev *gfbdev;
 	int ret;
-	int bpp_sel = 24;
 
 	/*bpp_sel = 8;*/
 	gfbdev = kzalloc(sizeof(struct cirrus_fbdev), GFP_KERNEL);
@@ -296,7 +295,7 @@ int cirrus_fbdev_init(struct cirrus_device *cdev)
 	/* disable all the possible outputs/crtcs before entering KMS mode */
 	drm_helper_disable_unused_functions(cdev->dev);
 
-	return drm_fb_helper_initial_config(&gfbdev->helper, bpp_sel);
+	return drm_fb_helper_initial_config(&gfbdev->helper, cirrus_bpp);
 }
 
 void cirrus_fbdev_fini(struct cirrus_device *cdev)
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux