From: Michel Dänzer <michel.daenzer@xxxxxxx> The value of this register is transferred to the V_COUNTER register at the beginning of vertical blank. V_COUNTER is the reference for VLINE waits and goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout, so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the beginning of vertical blank, and VLINE waits excluding the whole scanout area could never finish (possibly only if VIEWPORT_Y_START is larger than the length of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer height should prevent this for any kind of VLINE wait. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 . CC: stable@xxxxxxxxxxxxxxx Signed-off-by: Michel Dänzer <michel.daenzer@xxxxxxx> --- Maybe we should also check/clamp the VLINE ranges from userspace? drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0fda830..c54efd4 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1189,7 +1189,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, WREG32(EVERGREEN_GRPH_ENABLE + radeon_crtc->crtc_offset, 1); WREG32(EVERGREEN_DESKTOP_HEIGHT + radeon_crtc->crtc_offset, - crtc->mode.vdisplay); + target_fb->height); x &= ~3; y &= ~1; WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset, @@ -1358,7 +1358,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, WREG32(AVIVO_D1GRPH_ENABLE + radeon_crtc->crtc_offset, 1); WREG32(AVIVO_D1MODE_DESKTOP_HEIGHT + radeon_crtc->crtc_offset, - crtc->mode.vdisplay); + target_fb->height); x &= ~3; y &= ~1; WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset, -- 1.7.8.3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
