On evergreen depth-stencil textures are allocated as two objects, and
when using the eg_surface_init_1d_miptrees code path the size evaluation
uses the generalized surf_minify function. Here when allocating the
depth texture the alignment takes the depth bpe value into account, and
uses bpe=1 for the stencil texture. As a result the texture pair may
consist of textures with two different nblk_x sizes and this seems to
be a problem with npot textures, i.e. if the so allocated depth texture
is larger than the stencil texture, then the kernel may reject sent data
with an error message like:
evergreen_cs_track_validate_stencil:622 stencil read bo too
small (layer size 131072, offset 524288, max layer 1, bo size 606208)
because apparently the expected layer size is evaluated from the depth
texture size, but the actual bo size is evaluated based on the true texture
size values. If, on the other hand, the stencil texture is larger than the
depth texture, then the data is send with a wrong alignment, and certain
dEQP-GLES31 tests fail.
In order to obtain equal npot texture sizes magnify the depth texture alignment
requirement in these cases by its bpe, so that the relative alignment is
the same for depth and stencil texture.
Fixes on BARTS:
dEQP-GLES31.functional.stencil_texturing.format
.depth32f_stencil8_2d
.depth32f_stencil8_2d_array
.depth24_stencil8_2d Pass
.depth24_stencil8_2d_array
.stencil_index8_2d
.stencil_index8_2d_array
.depth32f_stencil8_draw
.depth24_stencil8_draw
dEQP-GLES31.functional.texture.border_clamp.formats
.stencil_index8.nearest_size_npot
.depth24_stencil8_sample_stencil.nearest_size_npot
.depth32f_stencil8_sample_stencil.nearest_size_npot
dEQP-GLES31.functional.texture.border_clamp.per_axis_wrap_mode.texture_2d
.uint_stencil.nearest.s_clamp_to_edge_t_clamp_to_border_npot
.uint_stencil.nearest.s_repeat_t_clamp_to_border_npot
.uint_stencil.nearest.s_mirrored_repeat_t_clamp_to_border_npot
Signed-off-by: Gert Wollny <gert.wollny@xxxxxxxxxxxxx>
---
Thanks for reviewing and any comments,
Gert
PS: - I have commit rights for mesa, I'm not sure whether this also includes drm.
- This is a resend, because I first tried with a mail address that was not
subscribed to the list and the mail probably ended up in some moderation
queue (sorry)
radeon/radeon_surface.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/radeon/radeon_surface.c b/radeon/radeon_surface.c
index 3cafcfcb..0579389c 100644
--- a/radeon/radeon_surface.c
+++ b/radeon/radeon_surface.c
@@ -612,6 +612,7 @@ static int eg_surface_init_1d(struct radeon_surface_manager *surf_man,
struct radeon_surface *surf,
struct radeon_surface_level *level,
unsigned bpe,
+ unsigned align_maginify,
uint64_t offset, unsigned start_level)
{
uint32_t xalign, yalign, zalign, tilew;
@@ -620,7 +621,7 @@ static int eg_surface_init_1d(struct radeon_surface_manager *surf_man,
/* compute alignment */
tilew = 8;
xalign = surf_man->hw_info.group_bytes / (tilew * bpe * surf->nsamples);
- xalign = MAX2(tilew, xalign);
+ xalign = MAX2(tilew, xalign * align_maginify);
yalign = tilew;
zalign = 1;
if (surf->flags & RADEON_SURF_SCANOUT) {
@@ -652,7 +653,8 @@ static int eg_surface_init_1d(struct radeon_surface_manager *surf_man,
static int eg_surface_init_2d(struct radeon_surface_manager *surf_man,
struct radeon_surface *surf,
struct radeon_surface_level *level,
- unsigned bpe, unsigned tile_split,
+ unsigned bpe, unsigned align_magnify,
+ unsigned tile_split,
uint64_t offset, unsigned start_level)
{
unsigned tilew, tileh, tileb;
@@ -691,7 +693,7 @@ static int eg_surface_init_2d(struct radeon_surface_manager *surf_man,
level[i].mode = RADEON_SURF_MODE_2D;
eg_surf_minify(surf, level+i, bpe, i, slice_pt, mtilew, mtileh, mtileb, offset);
if (level[i].mode == RADEON_SURF_MODE_1D) {
- return eg_surface_init_1d(surf_man, surf, level, bpe, offset, i);
+ return eg_surface_init_1d(surf_man, surf, level, bpe, align_magnify, offset, i);
}
/* level0 and first mipmap need to have alignment */
offset = surf->bo_size;
@@ -793,16 +795,24 @@ static int eg_surface_init_1d_miptrees(struct radeon_surface_manager *surf_man,
/* Old libdrm_macros.headers didn't have stencil_level in it. This prevents crashes. */
struct radeon_surface_level tmp[RADEON_SURF_MAX_LEVEL];
struct radeon_surface_level *stencil_level =
- (surf->flags & RADEON_SURF_HAS_SBUFFER_MIPTREE) ? surf->stencil_level : tmp;
+ (surf->flags & RADEON_SURF_HAS_SBUFFER_MIPTREE) ? surf->stencil_level : tmp;
- r = eg_surface_init_1d(surf_man, surf, surf->level, surf->bpe, 0, 0);
+ int magnify_align = is_depth_stencil && (surf->npix_x & (surf->npix_x - 1));
+
+ /* With certain sizes the depth and the stencil texture end up being of
+ * different block sizes which later results in wrong rendering for npot
+ * textures. Inflate the alignment requirement for the depth surface by
+ * its bpe in order to make it allocate a texture that is of the same
+ * block size like the stencil texture */
+ r = eg_surface_init_1d(surf_man, surf, surf->level, surf->bpe,
+ magnify_align ? surf->bpe : 1, 0, 0);
if (r)
return r;
if (is_depth_stencil) {
- r = eg_surface_init_1d(surf_man, surf, stencil_level, 1,
- surf->bo_size, 0);
- surf->stencil_offset = stencil_level[0].offset;
+ r = eg_surface_init_1d(surf_man, surf, stencil_level, 1, 1,
+ surf->bo_size, 0);
+ surf->stencil_offset = stencil_level[0].offset;
}
return r;
}
@@ -816,16 +826,22 @@ static int eg_surface_init_2d_miptrees(struct radeon_surface_manager *surf_man,
struct radeon_surface_level tmp[RADEON_SURF_MAX_LEVEL];
struct radeon_surface_level *stencil_level =
(surf->flags & RADEON_SURF_HAS_SBUFFER_MIPTREE) ? surf->stencil_level : tmp;
+ int magnify_align = is_depth_stencil && (surf->npix_x & (surf->npix_x - 1));
+ /* Inflate the alignment requirement for npot textures to insure that
+ * stencil and depth texture have the same block size. Use this only in
+ * the 1d code path that uses the non-specific minify. */
r = eg_surface_init_2d(surf_man, surf, surf->level, surf->bpe,
+ magnify_align ? surf->bpe : 1,
surf->tile_split, 0, 0);
if (r)
return r;
if (is_depth_stencil) {
- r = eg_surface_init_2d(surf_man, surf, stencil_level, 1,
- surf->stencil_tile_split, surf->bo_size, 0);
- surf->stencil_offset = stencil_level[0].offset;
+ r = eg_surface_init_2d(surf_man, surf, stencil_level, 1, 1,
+ surf->stencil_tile_split, surf->bo_size, 0);
+ surf->stencil_offset = stencil_level[0].offset;
+
}
return r;
}
--
2.16.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
