X/Y positioning of T-format buffers is quite tricky and the current
implementation was failing to position a plane using this format
correctly when the CRTC X, Y or both X and Y offsets were negative.
It was also failing when the SRC X/Y offsets were != 0.
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Reviewed-by: Eric Anholt <eric@xxxxxxxxxx>
---
Changes in v2:
- Adjusted the commit message
- Fixed the comment explaining why h_mask is 63
- Dropped Eric's SoB and grabbed authorship
---
drivers/gpu/drm/vc4/vc4_plane.c | 50 +++++++++++++++++++++++++++++++++++------
1 file changed, 43 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 8b61574744bf..651f503c209a 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -525,22 +525,58 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
(i ? h_subsample : 1) *
fb->format->cpp[i];
}
+
break;
case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: {
- /* For T-tiled, the FB pitch is "how many bytes from
- * one row to the next, such that pitch * tile_h ==
- * tile_size * tiles_per_row."
- */
u32 tile_size_shift = 12; /* T tiles are 4kb */
+ /* Whole-tile offsets, mostly for setting the pitch. */
+ u32 tile_w_shift = fb->format->cpp[0] == 2 ? 6 : 5;
u32 tile_h_shift = 5; /* 16 and 32bpp are 32 pixels high */
+ u32 tile_w_mask = (1 << tile_w_shift) - 1;
+ /* The height mask on 32-bit-per-pixel tiles is 63, i.e. twice
+ * the height (in pixels) of a 4k tile.
+ */
+ u32 tile_h_mask = (2 << tile_h_shift) - 1;
+ /* For T-tiled, the FB pitch is "how many bytes from one row to
+ * the next, such that
+ *
+ * pitch * tile_h == tile_size * tiles_per_row
+ */
u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift);
+ u32 tiles_l = vc4_state->src_x >> tile_w_shift;
+ u32 tiles_r = tiles_w - tiles_l;
+ u32 tiles_t = vc4_state->src_y >> tile_h_shift;
+ /* Intra-tile offsets, which modify the base address (the
+ * SCALER_PITCH0_TILE_Y_OFFSET tells HVS how to walk from that
+ * base address).
+ */
+ u32 tile_y = (vc4_state->src_y >> 4) & 1;
+ u32 subtile_y = (vc4_state->src_y >> 2) & 3;
+ u32 utile_y = vc4_state->src_y & 3;
+ u32 x_off = vc4_state->src_x & tile_w_mask;
+ u32 y_off = vc4_state->src_y & tile_h_mask;
tiling = SCALER_CTL0_TILING_256B_OR_T;
+ pitch0 = (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) |
+ VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) |
+ VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) |
+ VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R));
+ vc4_state->offsets[0] += tiles_t * (tiles_w << tile_size_shift);
+ vc4_state->offsets[0] += subtile_y << 8;
+ vc4_state->offsets[0] += utile_y << 4;
+
+ /* Rows of tiles alternate left-to-right and right-to-left. */
+ if (tiles_t & 1) {
+ pitch0 |= SCALER_PITCH0_TILE_INITIAL_LINE_DIR;
+ vc4_state->offsets[0] += (tiles_w - tiles_l) <<
+ tile_size_shift;
+ vc4_state->offsets[0] -= (1 + !tile_y) << 10;
+ } else {
+ vc4_state->offsets[0] += tiles_l << tile_size_shift;
+ vc4_state->offsets[0] += tile_y << 10;
+ }
- pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET) |
- VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L) |
- VC4_SET_FIELD(tiles_w, SCALER_PITCH0_TILE_WIDTH_R));
break;
}
--
2.14.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
