This patch use layer_nr function to get layer number to init plane
When plane init in crtc create,
it use the number of OVL layer to init plane.
That's OVL can read 4 memory address.
For mt2712 third ddp, it use RDMA to read memory.
RDMA can read 1 memory address, so it just init one plane.
For compatibility, this patch use mtk_ddp_comp_layer_nr function
to get layer number from their HW component in ddp for plane init.
Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 26 ++++++++++++++++++--------
drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 2 +-
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 4bf636e466f2..b4d3dfca4003 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -45,7 +45,8 @@ struct mtk_drm_crtc {
bool pending_needs_vblank;
struct drm_pending_vblank_event *event;
- struct drm_plane planes[OVL_LAYER_NR];
+ struct drm_plane planes[MAX_LAYER_NR];
+ unsigned int layer_nr;
bool pending_planes;
void __iomem *config_regs;
@@ -286,7 +287,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
}
/* Initially configure all planes */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
@@ -351,7 +352,7 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
}
if (mtk_crtc->pending_planes) {
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
@@ -403,7 +404,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
return;
/* Set all pending plane state to disabled */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
@@ -450,7 +451,7 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
if (mtk_crtc->event)
mtk_crtc->pending_needs_vblank = true;
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
@@ -596,6 +597,9 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
goto unprepare;
}
+ if (i == 0)
+ mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(comp);
+
if (i == 0 && (comp_id == DDP_COMPONENT_RDMA0 ||
comp_id == DDP_COMPONENT_RDMA1 ||
comp_id == DDP_COMPONENT_RDMA2)) {
@@ -606,7 +610,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
mtk_crtc->ddp_comp[i] = comp;
}
- for (zpos = 0; zpos < OVL_LAYER_NR; zpos++) {
+ for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
DRM_PLANE_TYPE_OVERLAY;
@@ -616,8 +620,14 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
goto unprepare;
}
- ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
- &mtk_crtc->planes[1], pipe);
+ if (mtk_crtc->layer_nr == 1) {
+ ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
+ NULL, pipe);
+ } else {
+ ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
+ &mtk_crtc->planes[1], pipe);
+ }
+
if (ret < 0)
goto unprepare;
drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index 9d9410c67ae9..0399321b1414 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -18,7 +18,7 @@
#include "mtk_drm_ddp_comp.h"
#include "mtk_drm_plane.h"
-#define OVL_LAYER_NR 4
+#define MAX_LAYER_NR 4
#define MTK_LUT_SIZE 512
#define MTK_MAX_BPC 10
#define MTK_MIN_BPC 3
--
2.12.5.2.gbdf23ab
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
