When the CSI is receiving from a bt.656 bus, include a check for field type 'alternate' when determining whether to set CSI clock mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE. Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> --- drivers/gpu/ipu-v3/ipu-csi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index caa05b0..5450a2d 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -339,7 +339,8 @@ static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, break; case V4L2_MBUS_BT656: csicfg->ext_vsync = 0; - if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field)) + if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field) || + mbus_fmt->field == V4L2_FIELD_ALTERNATE) csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_INTERLACED; else csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
