RE: [PATCH v6 02/35] drm: HDMI and DP specific HDCP2.2 defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>-----Original Message-----
>From: C, Ramalingam
>Sent: Saturday, July 14, 2018 8:45 AM
>To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
>daniel@xxxxxxxx; seanpaul@xxxxxxxxxxxx; Winkler, Tomas
><tomas.winkler@xxxxxxxxx>; Usyskin, Alexander <alexander.usyskin@xxxxxxxxx>;
>Shankar, Uma <uma.shankar@xxxxxxxxx>
>Cc: Sharma, Shashank <shashank.sharma@xxxxxxxxx>; C, Ramalingam
><ramalingam.c@xxxxxxxxx>
>Subject: [PATCH v6 02/35] drm: HDMI and DP specific HDCP2.2 defines
>
>This patch adds HDCP register definitions for HDMI and DP HDCP adaptations.
>
>HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where as
>HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h.
>
>v2:
>  bit_field definitions are replaced by macros. [Tomas and Jani]
>v3:
>  No Changes.
>v4:
>  Comments style and typos are fixed [Uma]
>v5:
>  Fix for macros.
>v6:
>  Adds _MS to the timeouts to represent units [Sean Paul]
>
>Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
>Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>---
> include/drm/drm_dp_helper.h | 51
>+++++++++++++++++++++++++++++++++++++++++++++
> include/drm/drm_hdcp.h      | 30 ++++++++++++++++++++++++++
> 2 files changed, 81 insertions(+)
>
>diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index
>c01564991a9f..17e0889d6aaa 100644
>--- a/include/drm/drm_dp_helper.h
>+++ b/include/drm/drm_dp_helper.h
>@@ -904,6 +904,57 @@
> #define DP_AUX_HDCP_KSV_FIFO		0x6802C
> #define DP_AUX_HDCP_AINFO		0x6803B
>
>+/* DP HDCP2.2 parameter offsets in DPCD address space */
>+#define DP_HDCP_2_2_REG_RTX_OFFSET		0x69000
>+#define DP_HDCP_2_2_REG_TXCAPS_OFFSET		0x69008
>+#define DP_HDCP_2_2_REG_CERT_RX_OFFSET		0x6900B
>+#define DP_HDCP_2_2_REG_RRX_OFFSET		0x69215
>+#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET		0x6921D
>+#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET		0x69220
>+#define DP_HDCP_2_2_REG_EKH_KM_OFFSET		0x692A0

It would be good to append WRITE since we have a READ counterpart to be explicit.

>+#define DP_HDCP_2_2_REG_M_OFFSET		0x692B0
>+#define DP_HDCP_2_2_REG_HPRIME_OFFSET		0x692C0
>+#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET	0x692E0
>+#define DP_HDCP_2_2_REG_RN_OFFSET		0x692F0
>+#define DP_HDCP_2_2_REG_LPRIME_OFFSET		0x692F8
>+#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET		0x69318
>+#define	DP_HDCP_2_2_REG_RIV_OFFSET		0x69328
>+#define DP_HDCP_2_2_REG_RXINFO_OFFSET		0x69330
>+#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET	0x69332
>+#define DP_HDCP_2_2_REG_VPRIME_OFFSET		0x69335
>+#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET	0x69345
>+#define DP_HDCP_2_2_REG_V_OFFSET		0x693E0
>+#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET	0x693F0
>+#define DP_HDCP_2_2_REG_K_OFFSET		0x693F3
>+#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET	0x693F5
>+#define DP_HDCP_2_2_REG_MPRIME_OFFSET		0x69473
>+#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET		0x69493
>+#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET	0x69494
>+#define DP_HDCP_2_2_REG_DBG_OFFSET		0x69518
>+
>+/* DP HDCP message start offsets in DPCD address space */
>+#define DP_HDCP_2_2_AKE_INIT_OFFSET
>	DP_HDCP_2_2_REG_RTX_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET
>	DP_HDCP_2_2_REG_CERT_RX_OFFSET
>+#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET
>	DP_HDCP_2_2_REG_EKPUB_KM_OFFSET
>+#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET
>	DP_HDCP_2_2_REG_EKH_KM_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET
>	DP_HDCP_2_2_REG_HPRIME_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \
>+
>	DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET
>+#define DP_HDCP_2_2_LC_INIT_OFFSET
>	DP_HDCP_2_2_REG_RN_OFFSET
>+#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET
>	DP_HDCP_2_2_REG_LPRIME_OFFSET
>+#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET
>	DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
>+#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET
>	DP_HDCP_2_2_REG_RXINFO_OFFSET
>+#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET
>	DP_HDCP_2_2_REG_V_OFFSET
>+#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET
>	DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
>+#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET
>	DP_HDCP_2_2_REG_MPRIME_OFFSET
>+
>+#define HDCP_2_2_DP_RXSTATUS_LEN		1
>+#define HDCP_2_2_DP_RXSTATUS_READY(x)		((x) & BIT(0))
>+#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x)		((x) & BIT(1))
>+#define HDCP_2_2_DP_RXSTATUS_PAIRING(x)		((x) & BIT(2))
>+#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
>+#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x)	((x) & BIT(4))
>+
> /* DP 1.2 Sideband message defines */
> /* peer device type - DP 1.2a Table 2-92 */
> #define DP_PEER_DEVICE_NONE		0x0
>diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h index
>a2a4a159fcde..2b4cfb0b7324 100644
>--- a/include/drm/drm_hdcp.h
>+++ b/include/drm/drm_hdcp.h
>@@ -222,4 +222,34 @@ struct hdcp2_dp_errata_stream_type {
> 	uint8_t			stream_type;
> } __packed;
>
>+/* HDCP2.2 TIMEOUTs in mSec */
>+#define HDCP_2_2_CERT_TIMEOUT_MS		100
>+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS	1000
>+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS	200
>+#define HDCP_2_2_PAIRING_TIMEOUT_MS		200
>+#define	HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS		20
>+#define HDCP_2_2_DP_LPRIME_TIMEOUT_MS		7
>+#define HDCP_2_2_RECVID_LIST_TIMEOUT_MS		3000

Is this a ballpark figure ?  I couldn't get a specific timeout value from spec.

>+#define HDCP_2_2_STREAM_READY_TIMEOUT_MS	100
>+
>+/* HDMI HDCP2.2 Register Offsets */
>+#define HDCP_2_2_HDMI_REG_VER_OFFSET		0x50
>+#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET		0x60
>+#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET	0x70
>+#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET		0x80
>+#define HDCP_2_2_HDMI_REG_DBG_OFFSET		0xC0
>+
>+#define HDCP_2_2_HDMI_SUPPORT_MASK		BIT(2)
>+#define HDCP_2_2_RXCAPS_VERSION_VAL		0x2
>+
>+#define HDCP_2_2_RX_CAPS_VERSION_VAL		0x02

The above 2 names are confusing. Both say RXCAPS_VERSION. Please
rename them for clarity or drop one of them since they reflect same value, in case
intention was to define some other field here.

>+#define HDCP_2_2_SEQ_NUM_MAX			0xFFFFFF
>+#define	HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN	200
>+
>+/* Below macros take a byte at a time and mask the bit(s) */
>+#define HDCP_2_2_HDMI_RXSTATUS_LEN		2
>+#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x)	((x) & 0x3)
>+#define HDCP_2_2_HDMI_RXSTATUS_READY(x)		((x) & BIT(2))
>+#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
>+
> #endif
>--
>2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux