On Monday, July 09, 2018 10:29:40 PM Mikulas Patocka wrote:
>
> On Wed, 4 Jul 2018, Bartlomiej Zolnierkiewicz wrote:
>
> > On Tuesday, July 03, 2018 01:18:57 PM Mikulas Patocka wrote:
> > >
> > > On Tue, 3 Jul 2018, Bartlomiej Zolnierkiewicz wrote:
> > >
> > > > Hi,
> > > >
> > > > On Sunday, June 03, 2018 11:46:29 AM Mikulas Patocka wrote:
> > > > > I have a USB display adapter using the udlfb driver and I use it on an ARM
> > > > > board that doesn't have any graphics card. When I plug the adapter in, the
> > > > > console is properly displayed, however when I unplug and re-plug the
> > > > > adapter, the console is not displayed and I can't access it until I reboot
> > > > > the board.
> > > > >
> > > > > The reason is this:
> > > > > When the adapter is unplugged, dlfb_usb_disconnect calls
> > > > > unlink_framebuffer, then it waits until the reference count drops to zero
> > > > > and then it deallocates the framebuffer. However, the console that is
> > > > > attached to the framebuffer device keeps the reference count non-zero, so
> > > > > the framebuffer device is never destroyed. When the USB adapter is plugged
> > > > > again, it creates a new device /dev/fb1 and the console is not attached to
> > > > > it.
> > > > >
> > > > > This patch fixes the bug by unbinding the console from unlink_framebuffer.
> > > > > The code to unbind the console is moved from do_unregister_framebuffer to
> > > > > a function unbind_console. When the console is unbound, the reference
> > > > > count drops to zero and the udlfb driver frees the framebuffer. When the
> > > > > adapter is plugged back, a new framebuffer is created and the console is
> > > > > attached to it.
> > > > >
> > > > > Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
> > > > > Cc: stable@xxxxxxxxxxxxxxx
> > > >
> > > > After this change unbind_console() will be called twice in the standard
> > > > framebuffer unregister path:
> > > >
> > > > - first time, directly by do_unregister_framebuffer()
> > > >
> > > > - second time, indirectly by do_unregister_framebuffer()->unlink_framebuffer()
> > > >
> > > > This doesn't look correctly.
> > >
> > > unbind_console calls the FB_EVENT_FB_UNBIND notifier, FB_EVENT_FB_UNBIND
> > > goes to the function fbcon_fb_unbind and fbcon_fb_unbind checks if the
> > > console is bound to the framebuffer for which unbind is requested. So a
> > > double call won't cause any trouble.
> >
> > Even if it works okay currently it is not a best design to send duplicate
> > events - especially since this can be easily avoided (for non-udlfb users)
> > by:
> >
> > - renaming "vanilla" unlink_framebuffer() to __unlink_framebuffer()
> >
> > - converting do_unregister_framebuffer() to use __unlink_framebuffer()
> >
> > - adding "new" unlink_framebuffer() that will also call unbind_console()
> >
> > > > Also why can't udlfb just use unregister_framebuffer() like all other
> > > > drivers (it uses unlink_framebuffer() and it is the only user of this
> > > > helper)?
> > >
> > > It uses unregister_framebuffer() - but - unregister_framebuffer() may only
> > > be called when the open count of the framebuffer is zero. So, the udlfb
> > > driver waits until the open count drops to zero and then calls
> > > unregister_framebuffer().
> > >
> > > But the console subsystem keeps the framebuffer open - which means that if
> > > user use unplugs the USB adapter, the open count won't drop to zero
> > > (because the console is bound to it) - which means that
> > > unregister_framebuffer() will not be called.
> >
> > Is it a really the console subsystem and not the user-space keeping
> > /dev/fb0 (with console binded to fb0) opened after the USB device
> > vanishes?
>
> Yes - I unplugged the adapter without Xserver running and without any
> other framebuffer application running - the console keeps it open.
>
> > After re-plugging the USB device /dev/fb0 stays and /dev/fb1
> > appears, right?
>
> The file /dev/fb0 is deleted (because dlfb_usb_disconnect calls
> unlink_framebuffer), but it is kept in the kernel. When I re-plug the
> adapter, /dev/fb1 is created but the console is still bound to /dev/fb0.
> When the adapter is re-plugged, it shows just a green screen.
>
> > I also mean that unregister_framebuffer() should be called instead
> > unlink_framebuffer(), not additionally some time later as it is done
> > currently.
>
> Can unregister_framebuffer() be called when /dev/fb0 is open as a file
> handle and/or mapped to some process?
It should be OK.
> > Moreover the dlfb <-> fb_info locking scheme seems to be reversed
> > (+racy) as it is dlfb that should control lifetime of fb_info, then
> > in dlfb_free() we should just call framebuffer_release() etc.
>
> How should in your opinion framebuffer destruction work?
>
> Should the driver count the number of users and call
> unregister_framebuffer() when it drops to zero?
>
> Or should the driver call unregister_framebuffer() unconditionally when
> the device is unplugged and destroy the device in the "fb_destroy"
> callback? (fb_destroy seems to be called by the framebuffer subsystem when
> the open count reaches zero)
The driver should call unregister_framebuffer() unconditionally in
dlfb_usb_disconnect() (instead of calling unlink_framebuffer()).
Anyway it seems that this would require major reworking of the driver and
I think that it would be better to put efforts into fixing udl-kms driver
instead. For now I have queued your patch (with __unregister_framebuffer()
change to keep the old behavior for non-udlfb drivers) for v4.19 (patch
attached at the end of this mail).
> If I grep the kernel for fb_destroy, very few framebuffer drivers use it.
>
> > BTW comment in dlfb_ops_release():
> >
> > /* We can't free fb_info here - fbmem will touch it when we return */
> >
> > seems to be wrong as fbmem keeps an extra reference on fb_info
> > during ->fb_release().
> >
> > > You must unbind the console before calling unregister_framebuffer(). The
> >
> > Hmm? The first thing that [do_]unregister_framebuffer) does seems to be
> > unbinding the console.
> >
> > > PCI framebuffer drivers don't have this problem because the user is not
> > > expected to just unplug the PCI card while it is being used by the
> > > console.
> >
> > PCI framebuffer drivers currently don't use .suppress_bind_attrs driver
> > flag so the PCI devices can be unbinded at any time by using sysfs "unbind"
> > functionality (I guess we should be using .suppress_bind_attrs flag if it
> > doesn't work currently).
>
> I tested matrox PCI framebuffer driver on an old computer - and it suffers
> from the same problem as udlfb. The matrox driver keeps the open count and
> destroys itself when the open count reaches zero - but the console that is
> bound to the driver prevents the open count from reaching zero - so if I
> unbind the PCI device in sysfs, it does nothing and the console is still
> active and works.
matroxfb is a not a good reference driver as it also defers the call to
unregister_framebuffer() when the device is unplugged:
static void matroxfb_remove(struct matrox_fb_info *minfo, int dummy)
{
...
minfo->dead = 1;
if (minfo->usecount) {
/* destroy it later */
--> return;
}
matroxfb_unregister_device(minfo);
unregister_framebuffer(&minfo->fbcon);
...
}
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Subject: [PATCH] fb: fix lost console when the user unplugs a USB adapter
I have a USB display adapter using the udlfb driver and I use it on an ARM
board that doesn't have any graphics card. When I plug the adapter in, the
console is properly displayed, however when I unplug and re-plug the
adapter, the console is not displayed and I can't access it until I reboot
the board.
The reason is this:
When the adapter is unplugged, dlfb_usb_disconnect calls
unlink_framebuffer, then it waits until the reference count drops to zero
and then it deallocates the framebuffer. However, the console that is
attached to the framebuffer device keeps the reference count non-zero, so
the framebuffer device is never destroyed. When the USB adapter is plugged
again, it creates a new device /dev/fb1 and the console is not attached to
it.
This patch fixes the bug by unbinding the console from unlink_framebuffer.
The code to unbind the console is moved from do_unregister_framebuffer to
a function unbind_console. When the console is unbound, the reference
count drops to zero and the udlfb driver frees the framebuffer. When the
adapter is plugged back, a new framebuffer is created and the console is
attached to it.
Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxxxx>
Cc: Bernie Thompson <bernie@xxxxxxxxxxxx>
Cc: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
[b.zolnierkie: preserve old behavior for do_unregister_framebuffer()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/video/fbdev/core/fbmem.c | 38 ++++++++++++++++++++++++++++++++------
1 file changed, 32 insertions(+), 6 deletions(-)
Index: b/drivers/video/fbdev/core/fbmem.c
===================================================================
--- a/drivers/video/fbdev/core/fbmem.c 2018-07-25 12:49:21.668763429 +0200
+++ b/drivers/video/fbdev/core/fbmem.c 2018-07-25 12:51:42.824766984 +0200
@@ -1703,12 +1703,12 @@ static int do_register_framebuffer(struc
return 0;
}
-static int do_unregister_framebuffer(struct fb_info *fb_info)
+static int unbind_console(struct fb_info *fb_info)
{
struct fb_event event;
- int i, ret = 0;
+ int ret;
+ int i = fb_info->node;
- i = fb_info->node;
if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
return -EINVAL;
@@ -1723,17 +1723,29 @@ static int do_unregister_framebuffer(str
unlock_fb_info(fb_info);
console_unlock();
+ return ret;
+}
+
+static int __unlink_framebuffer(struct fb_info *fb_info);
+
+static int do_unregister_framebuffer(struct fb_info *fb_info)
+{
+ struct fb_event event;
+ int ret;
+
+ ret = unbind_console(fb_info);
+
if (ret)
return -EINVAL;
pm_vt_switch_unregister(fb_info->dev);
- unlink_framebuffer(fb_info);
+ __unlink_framebuffer(fb_info);
if (fb_info->pixmap.addr &&
(fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
kfree(fb_info->pixmap.addr);
fb_destroy_modelist(&fb_info->modelist);
- registered_fb[i] = NULL;
+ registered_fb[fb_info->node] = NULL;
num_registered_fb--;
fb_cleanup_device(fb_info);
event.info = fb_info;
@@ -1746,7 +1758,7 @@ static int do_unregister_framebuffer(str
return 0;
}
-int unlink_framebuffer(struct fb_info *fb_info)
+static int __unlink_framebuffer(struct fb_info *fb_info)
{
int i;
@@ -1758,6 +1770,20 @@ int unlink_framebuffer(struct fb_info *f
device_destroy(fb_class, MKDEV(FB_MAJOR, i));
fb_info->dev = NULL;
}
+
+ return 0;
+}
+
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+ int ret;
+
+ ret = __unlink_framebuffer(fb_info);
+ if (ret)
+ return ret;
+
+ unbind_console(fb_info);
+
return 0;
}
EXPORT_SYMBOL(unlink_framebuffer);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
