This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_plane.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 9d7a36f148cf..cfb50fedfa2b 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -320,6 +320,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
+ } else {
+ vc4_state->x_scaling[1] = VC4_SCALING_NONE;
+ vc4_state->y_scaling[1] = VC4_SCALING_NONE;
}
vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
--
2.14.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
