On Wed, 18 Jul 2018, Marcel Ziswiler wrote:
> On Wed, 2018-07-18 at 11:12 +0100, Daniel Thompson wrote:
> > On Wed, Jul 18, 2018 at 10:53:35AM +0100, Lee Jones wrote:
> > > On Wed, 18 Jul 2018, Marcel Ziswiler wrote:
> > >
> > > > On Wed, 2018-07-18 at 09:09 +0100, Lee Jones wrote:
> > > > > On Mon, 16 Jul 2018, Daniel Thompson wrote:
> > > > >
> > > > > > Currently, if the DT does not define num-interpolated-steps
> > > > > > then
> > > > > > num_steps is undefined and the interpolation code will deploy
> > > > > > randomly.
> > > > > > Fix this.
> > > > > >
> > > > > > Fixes: 573fe6d1c25c ("backlight: pwm_bl: Linear interpolation
> > > > > > between
> > > > > > brightness-levels")
> > > > > > Reported-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > > > > > Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > > > >
> > > > > This line is confusing. Did you guys author this patch
> > > > > together?
> > > >
> > > > Yes, I reported it and we came to a conclusion together.
> > >
> > > It sounds like you need to have all of the tags (except this one).
> > > :)
> > >
> > > Reported-by: for reporting the issue
> > > Suggested-by: for suggesting a resolution
> > > Acked-by: for reviewing it
> > > Tested-by: for testing it
> > >
> > > Signed-off-by usually means you either wrote a significant amount
> > > of
> > > the diffstat or you were part of the submission path.
> >
> > He did [I don't object to but wouldn't have used the extra brackets
> > you
> > brought up ;-) ].
>
> Yes, I take all the blame for the extra brackets. Regardless of having
> a masters in CS or not I still prefer too many then too few of them (;-
> p).
>
> > > > > My guess is that this line should be dropped and the RB and TB
> > > > > tags
> > > > > should remain? If it was reviewed too, perhaps an AB too?
> > > >
> > > > I'm OK either way and do not need any explicit authorship to be
> > > > expressed for me.
> > >
> > > In this instance I suggest keeping Reported-by and Tested-by.
> > >
> > > > > > Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > > > > > ---
> > > > > > drivers/video/backlight/pwm_bl.c | 17 ++++++++---------
> > > > > > 1 file changed, 8 insertions(+), 9 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/video/backlight/pwm_bl.c
> > > > > > b/drivers/video/backlight/pwm_bl.c
> > > > > > index 9ee4c1b735b2..e3c22b79fbcd 100644
> > > > > > --- a/drivers/video/backlight/pwm_bl.c
> > > > > > +++ b/drivers/video/backlight/pwm_bl.c
> > > > > > @@ -299,15 +299,14 @@ static int
> > > > > > pwm_backlight_parse_dt(struct
> > > > > > device *dev,
> > > > > > * interpolation between each of the values
> > > > > > of
> > > > > > brightness levels
> > > > > > * and creates a new pre-computed table.
> > > > > > */
> > > > > > - of_property_read_u32(node, "num-
> > > > > > interpolated-
> > > > > > steps",
> > > > > > - &num_steps);
> > > > > > -
> > > > > > - /*
> > > > > > - * Make sure that there is at least two
> > > > > > entries in
> > > > > > the
> > > > > > - * brightness-levels table, otherwise we
> > > > > > can't
> > > > > > interpolate
> > > > > > - * between two points.
> > > > > > - */
> > > > > > - if (num_steps) {
> > > > > > + if ((of_property_read_u32(node, "num-
> > > > > > interpolated-
> > > > > > steps",
> > > > > > + &num_steps) == 0)
> > > > > > &&
> > > > > > num_steps) {
> > > > >
> > > > > This is pretty ugly, and isn't it suffering from over-
> > > > > bracketing? My
> > > > > suggestion would be to break out the invocation of
> > > > > of_property_read_u32() from the if and test only the result.
> > > > >
> > > > > of_property_read_u32(node, "num-interpolated-
> > > > > steps",
> > > > > &num_steps);
> > > >
> > > > you mean:
> > > >
> > > > ret = of_property_read_u32(node, "num-interpolated-
> > > > steps", &num_steps);
> > > >
> > > > > if (!ret && num_steps) {
> > > > >
> > > > > I haven't checked the underling code, but is it even feasible
> > > > > for
> > > > > of_property_read_u32() to not succeed AND for num_steps to be
> > > > > set?
> > > > >
> > > > > If not, the check for !ret if superfluous and you can drop it.
> > > >
> > > > No, then we are back to the initial issue of num_steps
> > > > potentially not
> > > > being initialised. We really want both of_property_read_u32() to
> > > > succeed AND num_steps to actually be set.
> > >
> > > I also think num_steps should be pre-initialised.
>
> Yes, I guess it definitely does not hurt.
>
> > > Then it will only be set if of_property_read_u32() succeeds.
>
> Yes, but we still need to check for both, the function not failing and
> num_steps to actually be non zero.
Why? You don't do anything differently if it fails.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
