Re: [RFC PATCH 3/4] drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liviu,
On Thu, Jul 05, 2018 at 06:38:21PM +0100, Liviu Dudau wrote:
> On Thu, Jul 05, 2018 at 02:31:47PM +0100, Ayan Halder wrote:
> > On Tue, Jun 26, 2018 at 02:17:17PM +0100, Liviu Dudau wrote:
> > > Hi Ayan,
> > > 
> > > Thanks for the patch! I have some small comments to make:
> > > 
> > > On Fri, Jun 15, 2018 at 02:51:33PM +0100, Ayan Kumar Halder wrote:
> > > > Added the AFBC decoder registers for DP500 , DP550 and DP650.
> > > > These registers control the processing of AFBC buffers. It controls various
> > > > features like AFBC decoder enable, lossless transformation and block split
> > > > as well as setting of the left, right, top and bottom cropping of AFBC buffers
> > > > (in number of pixels).
> > > > All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
> > > > One needs to set the pixel values of the top, left, bottom and right cropping
> > > > for the AFBC framebuffer.
> > > > Added the functionality in malidp_de_plane_update() to set the various
> > > > registers for AFBC decoder, depending on the modifiers.
> > > > 
> > > > Signed-off-by: Ayan Kumar halder <ayan.halder@xxxxxxx>
> > > > Reviewed-by: Brian Starkey <brian.starkey@xxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/arm/malidp_hw.c     | 27 ++++++++-----
> > > >  drivers/gpu/drm/arm/malidp_hw.h     |  2 +
> > > >  drivers/gpu/drm/arm/malidp_planes.c | 81 +++++++++++++++++++++++++++++++++----
> > > >  drivers/gpu/drm/arm/malidp_regs.h   | 20 +++++++++
> > > >  4 files changed, 111 insertions(+), 19 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
> > > > index 4dbf39f..fd6b510 100644
> > > > --- a/drivers/gpu/drm/arm/malidp_hw.c
> > > > +++ b/drivers/gpu/drm/arm/malidp_hw.c
> > > > @@ -76,33 +76,38 @@ static const struct malidp_format_id malidp550_de_formats[] = {
> > > >  
> > > >  static const struct malidp_layer malidp500_layers[] = {
> > > >  	{ DE_VIDEO1, MALIDP500_DE_LV_BASE, MALIDP500_DE_LV_PTR_BASE,
> > > > -		MALIDP_DE_LV_STRIDE0, MALIDP500_LV_YUV2RGB, ROTATE_ANY },
> > > > +		MALIDP_DE_LV_STRIDE0, MALIDP500_LV_YUV2RGB, ROTATE_ANY,
> > > > +		MALIDP500_DE_LV_AD_CTRL },
> > > >  	{ DE_GRAPHICS1, MALIDP500_DE_LG1_BASE, MALIDP500_DE_LG1_PTR_BASE,
> > > > -		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY },
> > > > +		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY, MALIDP500_DE_LG1_AD_CTRL },
> > > >  	{ DE_GRAPHICS2, MALIDP500_DE_LG2_BASE, MALIDP500_DE_LG2_PTR_BASE,
> > > > -		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY },
> > > > +		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY, MALIDP500_DE_LG2_AD_CTRL },
> > > >  };
> > > >  
> > > >  static const struct malidp_layer malidp550_layers[] = {
> > > >  	{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
> > > > -		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY },
> > > > +		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY,
> > > > +		MALIDP550_DE_LV1_AD_CTRL },
> > > >  	{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
> > > > -		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY },
> > > > +		MALIDP_DE_LG_STRIDE, 0, ROTATE_ANY, MALIDP550_DE_LG_AD_CTRL },
> > > >  	{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
> > > > -		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY },
> > > > +		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY,
> > > > +		MALIDP550_DE_LV2_AD_CTRL },
> > > >  	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
> > > > -		MALIDP550_DE_LS_R1_STRIDE, 0, ROTATE_NONE },
> > > > +		MALIDP550_DE_LS_R1_STRIDE, 0, ROTATE_NONE, 0 },
> > > >  };
> > > >  
> > > >  static const struct malidp_layer malidp650_layers[] = {
> > > >  	{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
> > > > -		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY },
> > > > +		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY,
> > > > +		MALIDP550_DE_LV1_AD_CTRL },
> > > >  	{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
> > > > -		MALIDP_DE_LG_STRIDE, 0, ROTATE_COMPRESSED },
> > > > +		MALIDP_DE_LG_STRIDE, 0, ROTATE_COMPRESSED, MALIDP550_DE_LG_AD_CTRL },
> > > >  	{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
> > > > -		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY },
> > > > +		MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, ROTATE_ANY,
> > > > +		MALIDP550_DE_LV2_AD_CTRL },
> > > >  	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
> > > > -		MALIDP550_DE_LS_R1_STRIDE, 0, ROTATE_NONE },
> > > > +		MALIDP550_DE_LS_R1_STRIDE, 0, ROTATE_NONE, 0 },
> > > >  };
> > > >  
> > > >  #define SE_N_SCALING_COEFFS	96
> > > > diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
> > > > index 4390243..bbe6883 100644
> > > > --- a/drivers/gpu/drm/arm/malidp_hw.h
> > > > +++ b/drivers/gpu/drm/arm/malidp_hw.h
> > > > @@ -67,6 +67,8 @@ struct malidp_layer {
> > > >  	u16 stride_offset;	/* offset to the first stride register. */
> > > >  	s16 yuv2rgb_offset;	/* offset to the YUV->RGB matrix entries */
> > > >  	enum rotation_features rot;    /* type of rotation supported */
> > > > +	/* address offset for the AFBC decoder registers */
> > > > +	u16 afbc_decoder_offset;
> > > >  };
> > > >  
> > > >  enum malidp_scaling_coeff_set {
> > > > diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
> > > > index 533cdde..3950504 100644
> > > > --- a/drivers/gpu/drm/arm/malidp_planes.c
> > > > +++ b/drivers/gpu/drm/arm/malidp_planes.c
> > > > @@ -330,6 +330,71 @@ static void malidp_de_set_color_encoding(struct malidp_plane *plane,
> > > >  	}
> > > >  }
> > > >  
> > > > +static void malidp_set_plane_base_addr(struct drm_framebuffer *fb,
> > > > +				       struct malidp_plane *mp,
> > > > +				       int plane_index)
> > > > +{
> > > > +	dma_addr_t paddr;
> > > > +	u16 ptr;
> > > > +	struct drm_plane *plane = &mp->base;
> > > > +	bool afbc = fb->modifier ? true : false;
> > > 
> > > The decision to set afbc based on wether the fb has a modifier or not
> > > seems a bit weak. Should we also (at least) check that the modifier is
> > > an ARM one?
> > 
> > In my next patch (of this series) ie
> > https://patchwork.kernel.org/patch/10466537/, we have checked for the
> > validity of modifier and format in malidp_format_mod_supported(). When
> > drm_atomic_commit() is invoked, it first calls (indirectly via some
> > intermediate functions)
> > malidp_format_mod_supported() and then invokes
> > malidp_set_plane_base_addr(). So there is no way that an invalid
> > modifier could be passed to malidp_set_plane_base_addr(). If
> > malidp_format_mod_supported() returns error then drm_atomic_commit()
> > would return error too.
> > > 
> > > > +
> > > > +	ptr = mp->layer->ptr + (plane_index << 4);
> > > > +
> > > > +	/*
> > > > +	 * For AFBC buffers, cropping is handled by AFBC decoder rather than
> > > > +	 * pointer manipulation.
> > > > +	 */
> > > > +	if (!afbc) {
> > > > +		paddr = drm_fb_cma_get_gem_addr(fb, plane->state,
> > > > +						plane_index);
> > > > +	} else {
> > > > +		struct drm_gem_cma_object *obj;
> > > > +
> > > > +		obj = drm_fb_cma_get_gem_obj(fb, plane_index);
> > > > +
> > > > +		if (WARN_ON(!obj))
> > > > +			return;
> > > > +		paddr = obj->paddr;
> > > > +	}
> > > > +
> > > > +	malidp_hw_write(mp->hwdev, lower_32_bits(paddr), ptr);
> > > > +	malidp_hw_write(mp->hwdev, upper_32_bits(paddr), ptr + 4);
> > > > +}
> > > > +
> > > > +static void malidp_de_set_plane_afbc(struct drm_plane *plane)
> > > > +{
> > > > +	struct malidp_plane *mp;
> > > > +	u32 src_w, src_h, val = 0, src_x, src_y;
> > > > +	struct drm_framebuffer *fb = plane->state->fb;
> > > > +
> > > > +	mp = to_malidp_plane(plane);
> > > > +
> > > > +	/* convert src values from Q16 fixed point to integer */
> > > > +	src_w = plane->state->src_w >> 16;
> > > > +	src_h = plane->state->src_h >> 16;
> > > > +	src_x = plane->state->src_x >> 16;
> > > > +	src_y = plane->state->src_y >> 16;
> > > > +
> > > > +	val = ((fb->width - (src_x + src_w)) << MALIDP_AD_CROP_RIGHT_OFFSET) |
> > > > +		   src_x;
> > > > +	malidp_hw_write(mp->hwdev, val,
> > > > +			mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_H);
> > > > +
> > > > +	val = ((fb->height - (src_y + src_h)) << MALIDP_AD_CROP_BOTTOM_OFFSET) |
> > > > +		   src_y;
> > > > +	malidp_hw_write(mp->hwdev, val,
> > > > +			mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_V);
> > > > +
> > > > +	val = MALIDP_AD_EN;
> > > > +	if (fb->modifier & AFBC_FORMAT_MOD_SPLIT)
> > > > +		val |= MALIDP_AD_BS;
> > > > +	if (fb->modifier & AFBC_FORMAT_MOD_YTR)
> > > > +		val |= MALIDP_AD_YTR;
> > > > +
> > > > +	malidp_hw_write(mp->hwdev, val, mp->layer->afbc_decoder_offset);
> > > > +}
> > > > +
> > > >  static void malidp_de_plane_update(struct drm_plane *plane,
> > > >  				   struct drm_plane_state *old_state)
> > > >  {
> > > > @@ -338,6 +403,7 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > > >  	u32 src_w, src_h, dest_w, dest_h, val;
> > > >  	int i;
> > > >  	bool format_has_alpha = plane->state->fb->format->has_alpha;
> > > > +	struct drm_framebuffer *fb = plane->state->fb;
> > > >  
> > > >  	mp = to_malidp_plane(plane);
> > > >  
> > > > @@ -349,15 +415,9 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > > >  
> > > >  	malidp_hw_write(mp->hwdev, ms->format, mp->layer->base);
> > > >  
> > > > -	for (i = 0; i < ms->n_planes; i++) {
> > > > -		/* calculate the offset for the layer's plane registers */
> > > > -		u16 ptr = mp->layer->ptr + (i << 4);
> > > > -		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb,
> > > > -							     plane->state, i);
> > > > +	for (i = 0; i < ms->n_planes; i++)
> > > > +		malidp_set_plane_base_addr(fb, mp, i);
> > > >  
> > > > -		malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
> > > > -		malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
> > > > -	}
> > > >  	malidp_de_set_plane_pitches(mp, ms->n_planes,
> > > >  				    plane->state->fb->pitches);
> > > >  
> > > > @@ -381,6 +441,11 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > > >  				LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
> > > >  				mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
> > > >  
> > > > +	if (fb->modifier)
> > > > +		malidp_de_set_plane_afbc(plane);
> > > > +	else
> > > > +		malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
> > > 
> > > Given that you are testing for the non-zero value of fb->modifier inside
> > > malidp_de_set_plane_afbc() function before setting the afbc_decoder
> > > register value, I feel that you could take the 'else' branch from here
> > > and merge it into malidp_de_set_plane_afbc() function (possibly also
> > > rename it to malidp_de_set_plane).
> > 
> > I am not exactly sure what you meant here. We are testing for the non
> > zero value of fb->modifier in malidp_de_plane_update(). If
> > fb->modifier is not zero, we set the afbc specific registers in
> > malidp_de_set_plane_afbc(). Thus, malidp_de_plane_update()  will
> > invoke malidp_de_set_plane_afbc() for setting afbc stuff and will
> > continue with the other register settings. I do not see a clear reason
> > to refactor this code.
> 
> What I'm suggesting is:
> 
>  - rename malidp_de_set_plane_afbc to malidp_de_set_plane()
>  - remove the if .. else malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
>    and keep just the call to malidp_de_set_plane() without any other
>    condition
>  - inside malidp_de_set_plane(), change from:
> 	val = MALIDP_AD_EN;
>    to
> 	val = fb->modifier ? MALIDP_AD_EN : 0;
> 
>    and then the 0 value will be written correctly into the
>    afbc_decoder_offset if fb->modifier is zero.
> 
As discussed, I will consolidate all the AFBC specific register
configurations in a single function ie malidp_de_set_plane_afbc().
Thus, I will remove the "if (fb->modifier)" check from
malidp_de_plane_update() and add it in malidp_de_set_plane_afbc().

With this and  changes in other patches as well as the ack received,
I will send a v2 set of patches.

> Best regards,
> Liviu
> 
> > 
> > > With those small changes:
> > > 
> > > Reviewed-by: Liviu Dudau <liviu.dudau@xxxxxxx>
> > > 
> > > Best regards,
> > > Liviu
> > > 
> > > 
> > > > +
> > > >  	/* first clear the rotation bits */
> > > >  	val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
> > > >  	val &= ~LAYER_ROT_MASK;
> > > > diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
> > > > index 149024f..54f4ec5 100644
> > > > --- a/drivers/gpu/drm/arm/malidp_regs.h
> > > > +++ b/drivers/gpu/drm/arm/malidp_regs.h
> > > > @@ -180,10 +180,13 @@
> > > >  #define MALIDP500_LV_YUV2RGB		((s16)(-0xB8))
> > > >  #define MALIDP500_DE_LV_BASE		0x00100
> > > >  #define MALIDP500_DE_LV_PTR_BASE	0x00124
> > > > +#define MALIDP500_DE_LV_AD_CTRL		0x00400
> > > >  #define MALIDP500_DE_LG1_BASE		0x00200
> > > >  #define MALIDP500_DE_LG1_PTR_BASE	0x0021c
> > > > +#define MALIDP500_DE_LG1_AD_CTRL	0x0040c
> > > >  #define MALIDP500_DE_LG2_BASE		0x00300
> > > >  #define MALIDP500_DE_LG2_PTR_BASE	0x0031c
> > > > +#define MALIDP500_DE_LG2_AD_CTRL	0x00418
> > > >  #define MALIDP500_SE_BASE		0x00c00
> > > >  #define MALIDP500_SE_CONTROL		0x00c0c
> > > >  #define MALIDP500_SE_PTR_BASE		0x00e0c
> > > > @@ -208,10 +211,13 @@
> > > >  #define MALIDP550_LV_YUV2RGB		0x00084
> > > >  #define MALIDP550_DE_LV1_BASE		0x00100
> > > >  #define MALIDP550_DE_LV1_PTR_BASE	0x00124
> > > > +#define MALIDP550_DE_LV1_AD_CTRL	0x001B8
> > > >  #define MALIDP550_DE_LV2_BASE		0x00200
> > > >  #define MALIDP550_DE_LV2_PTR_BASE	0x00224
> > > > +#define MALIDP550_DE_LV2_AD_CTRL	0x002B8
> > > >  #define MALIDP550_DE_LG_BASE		0x00300
> > > >  #define MALIDP550_DE_LG_PTR_BASE	0x0031c
> > > > +#define MALIDP550_DE_LG_AD_CTRL		0x00330
> > > >  #define MALIDP550_DE_LS_BASE		0x00400
> > > >  #define MALIDP550_DE_LS_PTR_BASE	0x0042c
> > > >  #define MALIDP550_DE_PERF_BASE		0x00500
> > > > @@ -223,6 +229,20 @@
> > > >  #define MALIDP550_CONFIG_VALID		0x0c014
> > > >  #define MALIDP550_CONFIG_ID		0x0ffd4
> > > >  
> > > > +/* AFBC register offsets relative to MALIDPXXX_DE_LX_AD_CTRL */
> > > > +/* The following register offsets are common for DP500, DP550 and DP650 */
> > > > +#define MALIDP_AD_CROP_H                0x4
> > > > +#define MALIDP_AD_CROP_V                0x8
> > > > +#define MALIDP_AD_END_PTR_LOW           0xc
> > > > +#define MALIDP_AD_END_PTR_HIGH          0x10
> > > > +
> > > > +/* AFBC decoder Registers */
> > > > +#define MALIDP_AD_EN                    BIT(0)
> > > > +#define MALIDP_AD_YTR                   BIT(4)
> > > > +#define MALIDP_AD_BS                    BIT(8)
> > > > +#define MALIDP_AD_CROP_RIGHT_OFFSET     16
> > > > +#define MALIDP_AD_CROP_BOTTOM_OFFSET    16
> > > > +
> > > >  /*
> > > >   * Starting with DP550 the register map blocks has been standardised to the
> > > >   * following layout:
> > > > -- 
> > > > 2.7.4
> > > > 
> > > 
> > > -- 
> > > ====================
> > > | I would like to |
> > > | fix the world,  |
> > > | but they're not |
> > > | giving me the   |
> > >  \ source code!  /
> > >   ---------------
> > >     ??\_(???)_/??
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> ====================
> | I would like to |
> | fix the world,  |
> | but they're not |
> | giving me the   |
>  \ source code!  /
>   ---------------
>     ??\_(???)_/??
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux