2018-07-03 13:01 GMT+02:00 Philippe CORNU <philippe.cornu@xxxxxx>:
> Hi Yannick,
>
> On 06/29/2018 01:22 PM, Yannick Fertre wrote:
>> Filter the requested mode pixel clock frequency according
>> to the pad maximum supported frequency.
>>
>> Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
Applied on drm-misc-next.
Thansk,
Benjamin
>> ---
>> drivers/gpu/drm/stm/ltdc.c | 16 ++++++++++++----
>> drivers/gpu/drm/stm/ltdc.h | 1 +
>> 2 files changed, 13 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
>> index 00e3262..96d20c2 100644
>> --- a/drivers/gpu/drm/stm/ltdc.c
>> +++ b/drivers/gpu/drm/stm/ltdc.c
>> @@ -491,6 +491,14 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
>> int target_max = target + CLK_TOLERANCE_HZ;
>> int result;
>>
>> + result = clk_round_rate(ldev->pixel_clk, target);
>> +
>> + DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
>> +
>> + /* Filter modes according to the max frequency supported by the pads */
>> + if (result > ldev->caps.pad_max_freq_hz)
>> + return MODE_CLOCK_HIGH;
>> +
>> /*
>> * Accept all "preferred" modes:
>> * - this is important for panels because panel clock tolerances are
>> @@ -502,10 +510,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
>> if (mode->type & DRM_MODE_TYPE_PREFERRED)
>> return MODE_OK;
>>
>> - result = clk_round_rate(ldev->pixel_clk, target);
>> -
>> - DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
>> -
>> /*
>> * Filter modes according to the clock value, particularly useful for
>> * hdmi modes that require precise pixel clocks.
>> @@ -1039,11 +1043,15 @@ static int ltdc_get_caps(struct drm_device *ddev)
>> * does not work on 2nd layer.
>> */
>> ldev->caps.non_alpha_only_l1 = true;
>> + ldev->caps.pad_max_freq_hz = 90000000;
>> + if (ldev->caps.hw_version == HWVER_10200)
>> + ldev->caps.pad_max_freq_hz = 65000000;
>> break;
>> case HWVER_20101:
>> ldev->caps.reg_ofs = REG_OFS_4;
>> ldev->caps.pix_fmt_hw = ltdc_pix_fmt_a1;
>> ldev->caps.non_alpha_only_l1 = false;
>> + ldev->caps.pad_max_freq_hz = 150000000;
>> break;
>> default:
>> return -ENODEV;
>> diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
>> index c14e4db..0294d38 100644
>> --- a/drivers/gpu/drm/stm/ltdc.h
>> +++ b/drivers/gpu/drm/stm/ltdc.h
>> @@ -20,6 +20,7 @@ struct ltdc_caps {
>> u32 bus_width; /* bus width (32 or 64 bits) */
>> const u32 *pix_fmt_hw; /* supported pixel formats */
>> bool non_alpha_only_l1; /* non-native no-alpha formats on layer 1 */
>> + int pad_max_freq_hz; /* max frequency supported by pad */
>
> Thank you for your patch,
>
> Reviewed-by: Philippe Cornu <philippe.cornu@xxxxxx>
> Tested-by: Philippe Cornu <philippe.cornu@xxxxxx>
>
> Philippe :-)
>
>> };
>>
>> #define LTDC_MAX_LAYER 4
>>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
