Re: [PATCH v4 1/2] devicetree/bindings: display: Add document for rockchip RGB output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob Herring,
Thanks for your review.

在 2018/7/4 2:25, Rob Herring 写道:
On Tue, Jun 26, 2018 at 03:15:39PM +0800, Sandy Huang wrote:
This path add support rv1108 and px30 rgb output interface driver.

Bindings are for h/w, not drivers.

I will update at next version as following:
This patch add support rv1108 and px30 rgb output interface

Signed-off-by: Sandy Huang <hjc@xxxxxxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/1509522765-118759-1-git-send-email-hjc@xxxxxxxxxxxxxx
---

Changes in v4: Add support px30
Changes in v3: None
Changes in v2: None

.../bindings/display/rockchip/rockchip-rgb.txt     | 73 ++++++++++++++++++++++
  1 file changed, 73 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
new file mode 100644
index 0000000..077b9ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
@@ -0,0 +1,73 @@
+Rockchip RV1108 RGB interface
+================================
+
+Required properties:
+- compatible: matching the soc type:
+	- "rockchip,px30-rgb";
+	- "rockchip,rv1108-rgb";

This doesn't look right? What (and how) is getting programmed here
because you don't have any register interface.

This is register for DRM encoder and connecter or bridge for some RGB convert chips driver. so far we don't have any register for rgb interface, but it's most probable need to config some register for rgb interface in feauture for rockchip platform.

+
+Optional properties:
+- pinctrl-names: should be a "lcdc" entry or a "default" entry.
+- pinctrl-0: pin control group to be used for this interface.
+
+The rgb has two video ports described by:
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+	Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop

So there is a mux for these inputs and they are switched with pinctrl?

connetced can connect to vopb/vopl/vop which is same with other connenter like edp/dsi/lvds, there is a sample for edp at:Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
Just put the pinctrl nodes of the sources and enable whichever one is
active.

Do you think i need add pinctrl nodes here? Or am I wrong?
Rob




_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux