Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): > On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec > > <jernej.skrabec@xxxxxxxx> wrote: > > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): > >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@xxxxxxxx> > > > > wrote: > >> > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. > >> > Because of that, all output endpoints on such TCON node will point to a > >> > encoder which is part of component framework. > >> > > >> > Correct current graph traversing algorithm in such way that it doesn't > >> > skip output enpoints with id 0 on TV TCONs. > >> > >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't > >> have channel 0, it must be skipped. > > > > I'm not sure where this is stated. I read TCON binding again. Can you > > please point me to it? > > https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bind > ings/display/sunxi/sun4i-drm.txt#L169 > > Our TCON driver still expects RGB or LVDS panel / bridges on endpoint 0. Yes, but that can only happen on TCON which has channel 0. TV TCONs (those with channel 1 only) can't have panels or bridges connected to them, because they are internally always connected to either HDMI or TV encoder or both. Actually, R40 is the only SoC, where same TV TCON can be connected to TV encoder or HDMI. Others have specialized TV TCONs, which are connect to only one encoder. IMO TV TCONs are really just stripped down LCD TCONs to support one (or max two) specific encoder. > So I guess this was sort of implied historically. It's no longer true. > This is something we should probably fix. Fixed in what way? You mean update bindings to mention that TCON output endpoint 0 is reserved for panels or bridges? > > In practice our drivers don't look at it (yet), but rely on the downstream > encoder type to determine which channel to use. > > But please add the "allwinner,tcon-channel" property as specified in > the binding. It's my understanding of TCON binding documentation that property "allwinner,tcon-channel" is needed only if TCON supports both channels. TV TCON clearly supports only channel 1. In that case, there is no doubt to which channel output endpoint belongs. If that's not true, dt bindings documentation should be reworded to contain word "needed" or something similar. Currently, no DT for newer SoC contains that property (for example, A83T, H3, H5 or even A33). On A33 this is even more interesting, since tcon0 has only channel 0 and has DSI output endpoint with number 1. According to TCON binding docs, if "allwinner,tcon-channel" is not preset, endpoint number represent channel. So, that would mean DSI needs channel 1 on tcon which supports clearly only channel 0. So either there TCON bindings documentation needs updates or DT for A33 has to be updated. BTW, "allwinner,tcon-channel" property is not used at all in the code. > > > So on TV TCONs on R40 (without channel 0) TVE would be endpoint 1 and HDMI > > endpoint 2 (or the other way around)? > > Which one goes first doesn't quite matter. IIRC there's also a mux for TVE? AFAIK, TV TCON is by default connected to TV encoder unless HDMI mux in TCON TOP points to it. I think it's best put TVE with lower number since it's default and HDMI with higher number. Best regards, Jernej _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
