Dne sreda, 27. junij 2018 ob 20:25:00 CEST je Maxime Ripard napisal(a): > Hi! > > On Wed, Jun 27, 2018 at 06:45:14PM +0200, Jernej Skrabec wrote: > > Initial implementation of DE2 planes only supported fixed zpos. > > > > Expand implementation with configurable zpos property. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> > > Thanks for that work. I guess you should expand a bit on the exact > setup you're doing here. OK. > > Are the pipes working the same way on the DE2 than on DE1, ie does the > pipe blending applies before the alpha blending, and therefore you > need to make sure that there's not two planes with alpha going to the > same pipe? I'm not familiar with DE1 and I'm not sure what the problem is. However, there is an issue in DE2 when alpha blending multiple planes if bottom-most plane doesn't cover all screen. In this case alpha blending produce weird result on screen. Fortunately, there is elegant solution. Black opaque fill color is enabled for pipe 0 (always at the bottom), which covers any "undefined region" and that makes alpha blending happy again. Alternatively, blending modes between planes could be tweaked or disabled, but I found aforementioned solution is much simpler and you set it only once. > > Also, you seem to use the pipe and channels indifferently now, why is > that? Why do you think so? Channel always represents HW unit, for example, on H3, mixer0, channel 0 always represents VI plane, channel 1, represents first UI, plane, channel 2, second UI plane, etc. Pipe 0 always represent channel at the bottom, pipe 1 channel on top pipe 0, etc. Initial, fixed zpos implementation really had 1:1 mapping, but now it can be different. Register SUN8I_MIXER_BLEND_ROUTE holds pipe <-> channel mappings. Bits 3:0 represents pipe 0 and holds channel number. Bits 7:4 represents pipe 1, etc. Additionaly, there can be holes, for example, pipe 3 and pipe 0 are enabled and pipe 1 and 2 are disabled. I hope I answered your questions. Best regards, Jernej _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel