On Mon, Jun 25, 2018 at 12:06:49AM -0700, Stephen Boyd wrote: > Quoting spanda@xxxxxxxxxxxxxx (2018-06-24 21:56:05) > > On 2018-06-22 06:42, Stephen Boyd wrote: > > > Quoting Sandeep Panda (2018-06-21 05:32:07) > > >> + clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 > > >> MHz. > > >> + > > >> +- data-lanes: See ../../media/video-interface.txt > > >> +- lane-polarities: See ../../media/video-interface.txt > > > > > > We need another property for suspend-gpios function of GPIO1. I suppose > > > for the other GPIOs we don't need anything like this because they're > > > output functions only? GPIO4 can do PWM and I guess if pwm is used in > > > DT > > > from here then the driver can mux that out of gpio4 properly. I have no > > > idea how the hsync and vsync GPIOs would work though. I see that GPIO3 > > > can do DSIA hsync or vsync and GPIO2 can do DSIA vsync and I would > > > guess > > > those are in output mode only. Maybe that's just another property on > > > this node to indicate if we should mux out the function or not. Usually > > > that's done from pinctrl though. I don't have a use case for those > > > functions but I do care about suspend gpios so at least add that one > > > please. > > > > I was thinking of adding gpio1 (suspend-gpio) documentation when we add > > support for PSR feature. Since for PSR we will be using this > > suspoend-gpio. > > > > Ok sure, but I don't see any harm in adding it now. I'm fine with > waiting for the binding update when the PSR patches come if you feel > like adding it now will delay something. Please make the binding complete as possible now. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
