From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
The patch adds bindings to Toshiba DSI/LVDS bridge TC358764.
Bindings describe power supplies, reset gpio and video interfaces.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
---
.../bindings/display/bridge/toshiba,tc358764.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
new file mode 100644
index 0000000..8f9abf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
@@ -0,0 +1,35 @@
+TC358764 MIPI-DSI to LVDS panel bridge
+
+Required properties:
+ - compatible: "toshiba,tc358764"
+ - reg: the virtual channel number of a DSI peripheral
+ - vddc-supply: core voltage supply, 1.2V
+ - vddio-supply: I/O voltage supply, 1.8V or 3.3V
+ - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
+ - reset-gpios: a GPIO spec for the reset pin
+
+The device node can contain following 'port' child nodes,
+according to the OF graph bindings defined in [1]:
+ 0: DSI Input, not required, if the bridge is DSI controlled
+ 1: LVDS Output, mandatory
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358764";
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ lvds_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
