Hi, CK:
On Wed, 2018-06-13 at 13:45 +0800, CK Hu wrote:
> Hi, Stu:
>
> Two inline comment.
>
> On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > This patch add the connection from RDMA0 to DSI3
> >
> > Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++++
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
> > 2 files changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index c08aed8dae44..fed1b5704355 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -83,6 +83,7 @@
> > #define GAMMA_MOUT_EN_RDMA1 0x1
> > #define RDMA0_MOUT_DPI0 0x2
> > #define RDMA0_MOUT_DSI2 0x4
> > +#define RDMA0_MOUT_DSI3 0x5
>
> Usually, each bit of a mout register represent a output enable. Is this
> value 0x5 is a correct value?
In hw CONFIG SPEC show as following:
Bit(s) Name Description
2:0 DISP_PATH0_SOUT_SEL_IN 0 : Output to DSI0
1: Ooutput to DSI1
2: Ooutput to DPI
3: Ooutput to DPI1
4: Ooutput to DSI2
5: Ooutput to DSI3
6 : reserved
7: Ooutput to DISP_UFOE
So, the value 0x5 is correct value.
Regard,
Stu
>
> > #define RDMA1_MOUT_DPI0 0x2
> > #define DPI0_SEL_IN_RDMA1 0x1
> > #define COLOR1_SEL_IN_OVL1 0x1
> > @@ -164,6 +165,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN;
> > value = RDMA0_MOUT_DSI2;
> > + } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
> > + *addr = DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN;
> > + value = RDMA0_MOUT_DSI3;
> > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > value = RDMA1_MOUT_DPI0;
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > index fe6fdc021fc7..22f4c72fa785 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > @@ -228,7 +228,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
> > [DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
> > [DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
> > [DDP_COMPONENT_DSI2] = { MTK_DSI, 2, NULL },
> > - [DDP_COMPONENT_DSI2] = { MTK_DSI, 3, NULL },
> > + [DDP_COMPONENT_DSI3] = { MTK_DSI, 3, NULL },
>
> I think this is not related to this patch.
OK
>
> Regards,
> CK
>
> > [DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
> > [DDP_COMPONENT_OD0] = { MTK_DISP_OD, 0, &ddp_od },
> > [DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od },
>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
