TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.
Check if TCON has channel 0 and only then check for connected panel or
bridges.
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index b1205a7bc20f..c9ffa5381185 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1189,13 +1189,19 @@ static const struct component_ops sun4i_tcon_ops = {
static int sun4i_tcon_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ const struct sun4i_tcon_quirks *quirks;
struct drm_bridge *bridge;
struct drm_panel *panel;
int ret;
- ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
- if (ret == -EPROBE_DEFER)
- return ret;
+ quirks = of_device_get_match_data(&pdev->dev);
+
+ /* panels and bridges are present only on TCONs with channel 0 */
+ if (quirks->has_channel_0) {
+ ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ }
return component_add(&pdev->dev, &sun4i_tcon_ops);
}
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
