On 06/03/2018 11:40 PM, Hean-Loong, Ong wrote: > From: Ong Hean Loong <hean.loong.ong@xxxxxxxxx> > > Driver for Intel FPGA Video and Image Processing Suite Frame Buffer II. > The driver only supports the Intel Arria10 devkit and its variants. > This driver can be either loaded staticlly or in modules. > The OF device tree binding is located at: > Documentation/devicetree/bindings/display/altr,vip-fb2.txt > > Signed-off-by: Ong Hean Loong <hean.loong.ong@xxxxxxxxx> > --- > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/ivip/Kconfig | 14 +++ > drivers/gpu/drm/ivip/Makefile | 9 ++ > drivers/gpu/drm/ivip/intel_vip_conn.c | 95 ++++++++++++++++ > drivers/gpu/drm/ivip/intel_vip_core.c | 161 +++++++++++++++++++++++++++ > drivers/gpu/drm/ivip/intel_vip_drv.h | 52 +++++++++ > drivers/gpu/drm/ivip/intel_vip_of.c | 193 +++++++++++++++++++++++++++++++++ > 8 files changed, 527 insertions(+), 0 deletions(-) > create mode 100644 drivers/gpu/drm/ivip/Kconfig > create mode 100644 drivers/gpu/drm/ivip/Makefile > create mode 100644 drivers/gpu/drm/ivip/intel_vip_conn.c > create mode 100644 drivers/gpu/drm/ivip/intel_vip_core.c > create mode 100644 drivers/gpu/drm/ivip/intel_vip_drv.h > create mode 100644 drivers/gpu/drm/ivip/intel_vip_of.c > > diff --git a/drivers/gpu/drm/ivip/Kconfig b/drivers/gpu/drm/ivip/Kconfig > new file mode 100644 > index 0000000..1d08b90 > --- /dev/null > +++ b/drivers/gpu/drm/ivip/Kconfig > @@ -0,0 +1,14 @@ > +config DRM_IVIP > + tristate "Intel FGPA Video and Image Processing" > + depends on DRM && OF > + select DRM_GEM_CMA_HELPER > + select DRM_KMS_HELPER > + select DRM_KMS_FB_HELPER > + select DRM_KMS_CMA_HELPER > + help > + Choose this option if you have an Intel FPGA Arria 10 system > + and above with an Intel Display Port IP. This does not support > + legacy Intel FPGA Cyclone V display port. Currently only single > + frame buffer is supported. Note that ACPI and X_86 architecture > + is not supported for Arria10. If M is selected the module will be > + called ivip. Hi, Kconfig help text is supposed to be indented with one tab + 2 spaces. thanks, -- ~Randy _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
