[PATCH 15/21] udlfb: set optimal write delay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.

In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.

This patch changes the delay to this value.

Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx

---
 include/video/udlfb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-4.17-rc7/include/video/udlfb.h
===================================================================
--- linux-4.17-rc7.orig/include/video/udlfb.h	2018-06-03 13:17:37.000000000 +0200
+++ linux-4.17-rc7/include/video/udlfb.h	2018-06-03 13:17:37.000000000 +0200
@@ -88,7 +88,7 @@ struct dlfb_data {
 #define MIN_RAW_PIX_BYTES	2
 #define MIN_RAW_CMD_BYTES	(RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
 
-#define DL_DEFIO_WRITE_DELAY    5 /* fb_deferred_io.delay in jiffies */
+#define DL_DEFIO_WRITE_DELAY    msecs_to_jiffies(HZ <= 300 ? 4 : 10) /* optimal value for 720p video */
 #define DL_DEFIO_WRITE_DISABLE  (HZ*60) /* "disable" with long delay */
 
 /* remove these once align.h patch is taken into kernel */

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux