[PATCH 1/4] ARM: dts: Restructure Vexpress motherboard includes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is a bit unorthodox to just include a file in the middle
of a another DTS file, it breaks the pattern from other device
trees and also makes it really hard to reference things
across the files with phandles.

Restructure the include for the Versatile Express motherboards
to happen at the top of the file, reference the target nodes
directly, and indent the motherboard .dtsi files to reflect
their actual depth in the hiearchy.

This is a purely syntactic change that result in the same
DTB files from the DTS/DTSI files.

Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Robin Murphy <robin.murphy@xxxxxxx>
Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
Cc: Mali DP Maintainers <malidp@xxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi       | 706 +++++++++---------
 arch/arm/boot/dts/vexpress-v2m.dtsi           | 704 ++++++++---------
 arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts   |   3 +-
 arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts    |   5 +-
 arch/arm/boot/dts/vexpress-v2p-ca5s.dts       |   5 +-
 arch/arm/boot/dts/vexpress-v2p-ca9.dts        |   5 +-
 .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts |   5 +-
 7 files changed, 718 insertions(+), 715 deletions(-)

diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 35714ff6f467..7b8ff5b3b912 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -17,426 +17,430 @@
  * CHANGES TO vexpress-v2m.dtsi!
  */
 
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		arm,v2m-memory-map = "rs1";
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
+/ {
+	smb@8000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			arm,v2m-memory-map = "rs1";
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
 
-		psram@1,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <1 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
 
-		v2m_video_ram: vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
+			psram@1,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
 
-		ethernet@2,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
+			v2m_video_ram: vram@2,00000000 {
+				compatible = "arm,vexpress-vram";
+				reg = <2 0x00000000 0x00800000>;
+			};
 
-		usb@2,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <2 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
+			ethernet@2,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
 
-		iofpga@3,00000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
+			usb@2,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
 
-			v2m_sysreg: sysreg@10000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
+			iofpga@3,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
 
-				v2m_led_gpios: sys_led {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
 
-				v2m_mmc_gpios: sys_mci {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
+					v2m_led_gpios: sys_led {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: sys_mci {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: sys_flash {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
 				};
 
-				v2m_flash_gpios: sys_flash {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 				};
-			};
 
-			v2m_sysctl: sysctl@20000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-			};
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
 
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@30000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x030000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
 
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
 
-			aaci@40000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
+				mmci@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9 10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
 
-			mmci@50000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@60000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@70000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				v2m_serial0: uart@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial0: uart@90000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial1: uart@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial1: uart@a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial2: uart@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial2: uart@b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial3: uart@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial3: uart@c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				wdt@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
 
-			wdt@f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
 
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@160000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+					};
 
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
 				};
 
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
 
-			compact-flash@1a0000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a0000 0x100
-				       0x1a0100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupt-names = "combined";
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-				memory-region = <&v2m_video_ram>;
-				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
-				port {
-					v2m_clcd_pads: endpoint {
-						remote-endpoint = <&v2m_clcd_panel>;
-						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-					};
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
 				};
 
-				panel {
-					compatible = "panel-dpi";
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&v2m_video_ram>;
+					max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
 
 					port {
-						v2m_clcd_panel: endpoint {
-							remote-endpoint = <&v2m_clcd_pads>;
+						v2m_clcd_pads: endpoint {
+							remote-endpoint = <&v2m_clcd_panel>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 						};
 					};
 
-					panel-timing {
-						clock-frequency = <25175000>;
-						hactive = <640>;
-						hback-porch = <40>;
-						hfront-porch = <24>;
-						hsync-len = <96>;
-						vactive = <480>;
-						vback-porch = <32>;
-						vfront-porch = <11>;
-						vsync-len = <2>;
+					panel {
+						compatible = "panel-dpi";
+
+						port {
+							v2m_clcd_panel: endpoint {
+								remote-endpoint = <&v2m_clcd_pads>;
+							};
+						};
+
+						panel-timing {
+							clock-frequency = <25175000>;
+							hactive = <640>;
+							hback-porch = <40>;
+							hfront-porch = <24>;
+							hsync-len = <96>;
+							vactive = <480>;
+							vback-porch = <32>;
+							vfront-porch = <11>;
+							vsync-len = <2>;
+						};
 					};
 				};
 			};
-		};
 
-		v2m_fixed_3v3: fixed-regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
 
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
 
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
 
-		leds {
-			compatible = "gpio-leds";
+			leds {
+				compatible = "gpio-leds";
 
-			user1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
 
-			user2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
 
-			user3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
 
-			user4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
 
-			user5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
 
-			user6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
 
-			user7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
 
-			user8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
 			};
-		};
 
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			oscclk0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
 
-			v2m_oscclk1: oscclk1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 65000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
 
-			v2m_oscclk2: oscclk2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
 
-			volt-vio {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
 
-			temp-mcc {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
 
-			reset {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
 
-			muxfpga {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
 
-			shutdown {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
 
-			reboot {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
 
-			dvimode {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
 			};
 		};
 	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index b0021a816028..9cd5e146abd5 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -18,425 +18,429 @@
  * CHANGES TO vexpress-v2m-rs1.dtsi!
  */
 
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <1 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
+/ {
+	smb@4000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
 
-		psram@2,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <2 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
 
-		v2m_video_ram: vram@3,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <3 0x00000000 0x00800000>;
-		};
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
 
-		ethernet@3,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <3 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
+			v2m_video_ram: vram@3,00000000 {
+				compatible = "arm,vexpress-vram";
+				reg = <3 0x00000000 0x00800000>;
+			};
 
-		usb@3,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <3 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
 
-		iofpga@7,00000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 7 0 0x20000>;
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
 
-			v2m_sysreg: sysreg@0 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x00000 0x1000>;
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
 
-				v2m_led_gpios: sys_led {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
 
-				v2m_mmc_gpios: sys_mci {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
+					v2m_led_gpios: sys_led {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: sys_mci {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: sys_flash {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
 				};
 
-				v2m_flash_gpios: sys_flash {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 				};
-			};
 
-			v2m_sysctl: sysctl@1000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x01000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-			};
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
 
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@2000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x02000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
 
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
 
-			aaci@4000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x04000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9 10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
 
-			mmci@5000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x05000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@6000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x06000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@7000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x07000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				v2m_serial0: uart@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial0: uart@9000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x09000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial1: uart@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial1: uart@a000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial2: uart@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial2: uart@b000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial3: uart@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial3: uart@c000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
 
-			wdt@f000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer01: timer@11000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x11000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer23: timer@12000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x12000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
 
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@16000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+					};
 
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
 				};
 
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
-
-			rtc@17000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x17000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
 
-			compact-flash@1a000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a000 0x100
-				       0x1a100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f000 0x1000>;
-				interrupt-names = "combined";
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-				memory-region = <&v2m_video_ram>;
-				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
-				port {
-					v2m_clcd_pads: endpoint {
-						remote-endpoint = <&v2m_clcd_panel>;
-						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-					};
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
 				};
 
-				panel {
-					compatible = "panel-dpi";
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&v2m_video_ram>;
+					max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
 
 					port {
-						v2m_clcd_panel: endpoint {
-							remote-endpoint = <&v2m_clcd_pads>;
+						v2m_clcd_pads: endpoint {
+							remote-endpoint = <&v2m_clcd_panel>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 						};
 					};
 
-					panel-timing {
-						clock-frequency = <25175000>;
-						hactive = <640>;
-						hback-porch = <40>;
-						hfront-porch = <24>;
-						hsync-len = <96>;
-						vactive = <480>;
-						vback-porch = <32>;
-						vfront-porch = <11>;
-						vsync-len = <2>;
+					panel {
+						compatible = "panel-dpi";
+
+						port {
+							v2m_clcd_panel: endpoint {
+								remote-endpoint = <&v2m_clcd_pads>;
+							};
+						};
+
+						panel-timing {
+							clock-frequency = <25175000>;
+							hactive = <640>;
+							hback-porch = <40>;
+							hfront-porch = <24>;
+							hsync-len = <96>;
+							vactive = <480>;
+							vback-porch = <32>;
+							vfront-porch = <11>;
+							vsync-len = <2>;
+						};
 					};
 				};
 			};
-		};
 
-		v2m_fixed_3v3: fixed-regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
 
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
 
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
 
-		leds {
-			compatible = "gpio-leds";
+			leds {
+				compatible = "gpio-leds";
 
-			user1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
 
-			user2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
 
-			user3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
 
-			user4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
 
-			user5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
 
-			user6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
 
-			user7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
 
-			user8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
 			};
-		};
 
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			oscclk0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
 
-			v2m_oscclk1: oscclk1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 65000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
 
-			v2m_oscclk2: oscclk2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
 
-			volt-vio {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
 
-			temp-mcc {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
 
-			reset {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
 
-			muxfpga {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
 
-			shutdown {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
 
-			reboot {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
 
-			dvimode {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
 			};
 		};
 	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a8ac4e2ed290..3971427a105b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA15";
@@ -278,8 +279,6 @@
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index a4c7713edfcd..65a874ea66be 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA15_CA7";
@@ -584,7 +585,7 @@
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -641,8 +642,6 @@
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 32f1906ffecf..e5b4a7570a01 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA5s";
@@ -191,7 +192,7 @@
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -248,8 +249,6 @@
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 56308c1c0208..7ec3dac1f61d 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include "vexpress-v2m.dtsi"
 
 / {
 	model = "V2P-CA9";
@@ -301,7 +302,7 @@
 		};
 	};
 
-	smb@4000000 {
+	smb: smb@4000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -357,8 +358,6 @@
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m.dtsi"
 	};
 
 	site2: hsb@e0000000 {
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 1c9eadc2d71e..38880380e0fa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -13,6 +13,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2F-1XV7 Cortex-A53x2 SMM";
@@ -129,7 +130,7 @@
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -186,7 +187,5 @@
 				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 };
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux