[PATCH v4 2/2] dt-bindings: Add Truly NT35597 panel bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the device tree bindings for Truly NT35597 panel.
This panel supports both single DSI and dual DSI.

However, this patch series supports only dual DSI.

Changes in v4:
  - None

Signed-off-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/display/truly,nt35597.txt  | 69 ++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/truly,nt35597.txt

diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000..5d297b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt
@@ -0,0 +1,69 @@
+Truly model NT35597 1440x2560 DSI Panel
+
+Required properties:
+- compatible: should be "truly,nt35597"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+  for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+  for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+  for single DSI or Dual DSI
+  This should be low for dual DSI and high for single DSI mode
+- display-timings: Node for the Panel timings
+- ports: This device has two video ports driven by two DSIs. Their connections
+  are modelled using the OF graph bindings specified in
+  Documentation/devicetree/bindings/graph.txt.
+  - port@0: DSI input port driven by master DSI
+  - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+	dsi@ae94000 {
+		panel@0 {
+			compatible = "truly,nt35597";
+			reg = <0>;
+			vdda-supply = <&pm8998_l14>;
+			vdispp-supply = <&lab_regulator>;
+			vdispn-supply = <&ibb_regulator>;
+			pinctrl-names = "default", "suspend";
+			pinctrl-0 = <&dpu_dsi_active>;
+			pinctrl-1 = <&dpu_dsi_suspend>;
+
+			reset-gpios = <&tlmm 6 0>;
+			mode-gpios = <&tlmm 52 0>;
+			display-timings {
+				timing0: timing-0 {
+					clock-frequency = <268316138>;
+					hactive = <1440>;
+					vactive = <2560>;
+					hfront-porch = <200>;
+					hback-porch = <64>;
+					hsync-len = <32>;
+					vfront-porch = <8>;
+					vback-porch = <7>;
+					vsync-len = <1>;
+				};
+			};
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					panel0_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					panel1_in: endpoint {
+						remote-endpoint = <&dsi1_out>;
+					};
+				};
+			};
+		};
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux