Hi, CK:
For this patch, I would move it after "add ddp component OD1"
And add this line "#define OD1_MOUT_EN_RDMA1 BIT(16)" from
the path "Add support for mediatek SOC MT2712" to this patch
Regards,
Stu
On Fri, 2018-05-25 at 11:26 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Fri, 2018-05-25 at 10:34 +0800, stu.hsieh@xxxxxxxxxxxx wrote:
> > From: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> >
> > This patch add the connection from OD1 to RDMA1 for ext path.
> >
>
> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
>
> > Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 47ffa240bd25..0f568dd853d8 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -151,6 +151,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > } else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
> > *addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
> > value = GAMMA_MOUT_EN_RDMA1;
> > + } else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
> > + *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
> > + value = OD1_MOUT_EN_RDMA1;
> > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > value = RDMA1_MOUT_DPI0;
>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
