Hi Lin
2018-05-22 3:08 GMT+02:00 hl <hl@xxxxxxxxxxxxxx>:
> Hi Enric,
>
>
>
>
> On Monday, May 21, 2018 11:22 PM, Enric Balletbo Serra wrote:
>>
>> Hi Lin,
>>
>> 2018-05-21 11:37 GMT+02:00 Lin Huang <hl@xxxxxxxxxxxxxx>:
>>>
>>> DP firmware uses fixed phy config values to do training, but some
>>> boards need to adjust these values to fit for their unique hardware
>>> design. So get phy config values from dts and use software link training
>>> instead of relying on firmware, if software training fail, keep firmware
>>> training as a fallback if sw training fails.
>>>
>>> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>>> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
>>> Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>>> ---
>>> Changes in v2:
>>> - update patch following Enric suggest
>>> Changes in v3:
>>> - use variable fw_training instead sw_training_success
>>> - base on DP SPCE, if training fail use lower link rate to retry training
>>> Changes in v4:
>>> - improve cdn_dp_get_lower_link_rate() and cdn_dp_software_train_link()
>>> follow Sean suggest
>>> Changes in v5:
>>> - fix some whitespcae issue
>>> Changes in v6:
>>> - None
>>>
>>> drivers/gpu/drm/rockchip/Makefile | 3 +-
>>> drivers/gpu/drm/rockchip/cdn-dp-core.c | 24 +-
>>> drivers/gpu/drm/rockchip/cdn-dp-core.h | 2 +
>>> drivers/gpu/drm/rockchip/cdn-dp-link-training.c | 420
>>> ++++++++++++++++++++++++
>>> drivers/gpu/drm/rockchip/cdn-dp-reg.c | 31 +-
>>> drivers/gpu/drm/rockchip/cdn-dp-reg.h | 38 ++-
>>> 6 files changed, 505 insertions(+), 13 deletions(-)
>>> create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-link-training.c
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/Makefile
>>> b/drivers/gpu/drm/rockchip/Makefile
>>> index a314e21..b932f62 100644
>>> --- a/drivers/gpu/drm/rockchip/Makefile
>>> +++ b/drivers/gpu/drm/rockchip/Makefile
>>> @@ -9,7 +9,8 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
>>> rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o
>>>
>>> rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>>> -rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
>>> +rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o \
>>> + cdn-dp-link-training.o
>>> rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>>> rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
>>> rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
>>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c
>>> b/drivers/gpu/drm/rockchip/cdn-dp-core.c
>>> index cce64c1..d9d0d4d 100644
>>> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
>>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
>>> @@ -629,11 +629,13 @@ static void cdn_dp_encoder_enable(struct
>>> drm_encoder *encoder)
>>> goto out;
>>> }
>>> }
>>> -
>>> - ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
>>> - if (ret) {
>>> - DRM_DEV_ERROR(dp->dev, "Failed to idle video %d\n", ret);
>>> - goto out;
>>> + if (dp->use_fw_training == true) {
>>
>> You don't need to compare to true. Simply do:
>>
>> if (dp->use_fw_training)
>>
>>> + ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
>>> + if (ret) {
>>> + DRM_DEV_ERROR(dp->dev,
>>> + "Failed to idle video %d\n", ret);
>>> + goto out;
>>> + }
>>> }
>>>
>>> ret = cdn_dp_config_video(dp);
>>> @@ -642,11 +644,15 @@ static void cdn_dp_encoder_enable(struct
>>> drm_encoder *encoder)
>>> goto out;
>>> }
>>>
>>> - ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_VALID);
>>> - if (ret) {
>>> - DRM_DEV_ERROR(dp->dev, "Failed to valid video %d\n",
>>> ret);
>>> - goto out;
>>> + if (dp->use_fw_training == true) {
>>
>> if (dp->use_fw_training)
>>
>>> + ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_VALID);
>>> + if (ret) {
>>> + DRM_DEV_ERROR(dp->dev,
>>> + "Failed to valid video %d\n", ret);
>>> + goto out;
>>> + }
>>> }
>>> +
>>> out:
>>> mutex_unlock(&dp->lock);
>>> }
>>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.h
>>> b/drivers/gpu/drm/rockchip/cdn-dp-core.h
>>> index 46159b2..77a9793 100644
>>> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
>>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
>>> @@ -84,6 +84,7 @@ struct cdn_dp_device {
>>> bool connected;
>>> bool active;
>>> bool suspended;
>>> + bool use_fw_training;
>>>
>>> const struct firmware *fw; /* cdn dp firmware */
>>> unsigned int fw_version; /* cdn fw version */
>>> @@ -106,6 +107,7 @@ struct cdn_dp_device {
>>> u8 ports;
>>> u8 lanes;
>>> int active_port;
>>> + u8 train_set[4];
>>>
>>> u8 dpcd[DP_RECEIVER_CAP_SIZE];
>>> bool sink_has_audio;
>>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
>>> b/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
>>> new file mode 100644
>>> index 0000000..73c3290
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
>>> @@ -0,0 +1,420 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
>>> + * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>>> + */
>>> +
>>> +#include <linux/device.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/phy/phy.h>
>>> +#include <soc/rockchip/rockchip_phy_typec.h>
>>> +
>>> +#include "cdn-dp-core.h"
>>> +#include "cdn-dp-reg.h"
>>> +
>>> +static void cdn_dp_set_signal_levels(struct cdn_dp_device *dp)
>>> +{
>>> + struct cdn_dp_port *port = dp->port[dp->active_port];
>>> + struct rockchip_typec_phy *tcphy = phy_get_drvdata(port->phy);
>>> +
>>> + int rate = drm_dp_bw_code_to_link_rate(dp->link.rate);
>>> + u8 swing = (dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) >>
>>> + DP_TRAIN_VOLTAGE_SWING_SHIFT;
>>> + u8 pre_emphasis = (dp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
>>> + >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
>>> +
>>> + tcphy->typec_phy_config(port->phy, rate, dp->link.num_lanes,
>>> + swing, pre_emphasis);
>>> +}
>>> +
>>> +static int cdn_dp_set_pattern(struct cdn_dp_device *dp, uint8_t
>>> dp_train_pat)
>>> +{
>>> + u32 phy_config, global_config;
>>> + int ret;
>>> + uint8_t pattern = dp_train_pat & DP_TRAINING_PATTERN_MASK;
>>> +
>>> + global_config = NUM_LANES(dp->link.num_lanes - 1) | SST_MODE |
>>> + GLOBAL_EN | RG_EN | ENC_RST_DIS | WR_VHSYNC_FALL;
>>> +
>>> + phy_config = DP_TX_PHY_ENCODER_BYPASS(0) |
>>> + DP_TX_PHY_SKEW_BYPASS(0) |
>>> + DP_TX_PHY_DISPARITY_RST(0) |
>>> + DP_TX_PHY_LANE0_SKEW(0) |
>>> + DP_TX_PHY_LANE1_SKEW(1) |
>>> + DP_TX_PHY_LANE2_SKEW(2) |
>>> + DP_TX_PHY_LANE3_SKEW(3) |
>>> + DP_TX_PHY_10BIT_ENABLE(0);
>>> +
>>> + if (pattern != DP_TRAINING_PATTERN_DISABLE) {
>>> + global_config |= NO_VIDEO;
>>> + phy_config |= DP_TX_PHY_TRAINING_ENABLE(1) |
>>> + DP_TX_PHY_SCRAMBLER_BYPASS(1) |
>>> + DP_TX_PHY_TRAINING_PATTERN(pattern);
>>> + }
>>> +
>>> + ret = cdn_dp_reg_write(dp, DP_FRAMER_GLOBAL_CONFIG,
>>> global_config);
>>> + if (ret) {
>>> + DRM_ERROR("fail to set DP_FRAMER_GLOBAL_CONFIG, error:
>>> %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = cdn_dp_reg_write(dp, DP_TX_PHY_CONFIG_REG, phy_config);
>>> + if (ret) {
>>> + DRM_ERROR("fail to set DP_TX_PHY_CONFIG_REG, error:
>>> %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = cdn_dp_reg_write(dp, DPTX_LANE_EN, BIT(dp->link.num_lanes)
>>> - 1);
>>> + if (ret) {
>>> + DRM_ERROR("fail to set DPTX_LANE_EN, error: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + if (drm_dp_enhanced_frame_cap(dp->dpcd))
>>> + ret = cdn_dp_reg_write(dp, DPTX_ENHNCD, 1);
>>> + else
>>> + ret = cdn_dp_reg_write(dp, DPTX_ENHNCD, 0);
>>> + if (ret)
>>> + DRM_ERROR("failed to set DPTX_ENHNCD, error: %x\n", ret);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static u8 cdn_dp_pre_emphasis_max(u8 voltage_swing)
>>> +{
>>> + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
>>> + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
>>> + return DP_TRAIN_PRE_EMPH_LEVEL_3;
>>> + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
>>> + return DP_TRAIN_PRE_EMPH_LEVEL_2;
>>> + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
>>> + return DP_TRAIN_PRE_EMPH_LEVEL_1;
>>> + default:
>>> + return DP_TRAIN_PRE_EMPH_LEVEL_0;
>>> + }
>>> +}
>>> +
>>> +static void cdn_dp_get_adjust_train(struct cdn_dp_device *dp,
>>> + uint8_t
>>> link_status[DP_LINK_STATUS_SIZE])
>>> +{
>>> + int i;
>>> + uint8_t v = 0, p = 0;
>>> + uint8_t preemph_max;
>>> +
>>> + for (i = 0; i < dp->link.num_lanes; i++) {
>>> + v = max(v, drm_dp_get_adjust_request_voltage(link_status,
>>> i));
>>> + p = max(p,
>>> drm_dp_get_adjust_request_pre_emphasis(link_status,
>>> + i));
>>> + }
>>> +
>>> + if (v >= VOLTAGE_LEVEL_2)
>>> + v = VOLTAGE_LEVEL_2 | DP_TRAIN_MAX_SWING_REACHED;
>>> +
>>> + preemph_max = cdn_dp_pre_emphasis_max(v);
>>> + if (p >= preemph_max)
>>> + p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
>>> +
>>> + for (i = 0; i < dp->link.num_lanes; i++)
>>> + dp->train_set[i] = v | p;
>>> +}
>>> +
>>> +/*
>>> + * Pick training pattern for channel equalization. Training Pattern 3
>>> for HBR2
>>> + * or 1.2 devices that support it, Training Pattern 2 otherwise.
>>> + */
>>> +static u32 cdn_dp_select_chaneq_pattern(struct cdn_dp_device *dp)
>>> +{
>>> + u32 training_pattern = DP_TRAINING_PATTERN_2;
>>> +
>>> + /*
>>> + * cdn dp support HBR2 also support TPS3. TPS3 support is also
>>> mandatory
>>> + * for downstream devices that support HBR2. However, not all
>>> sinks
>>> + * follow the spec.
>>> + */
>>> + if (drm_dp_tps3_supported(dp->dpcd))
>>> + training_pattern = DP_TRAINING_PATTERN_3;
>>> + else
>>> + DRM_DEBUG_KMS("5.4 Gbps link rate without sink TPS3
>>> support\n");
>>> +
>>> + return training_pattern;
>>> +}
>>> +
>>> +
>>> +static bool cdn_dp_link_max_vswing_reached(struct cdn_dp_device *dp)
>>> +{
>>> + int lane;
>>> +
>>> + for (lane = 0; lane < dp->link.num_lanes; lane++)
>>> + if ((dp->train_set[lane] & DP_TRAIN_MAX_SWING_REACHED) ==
>>> 0)
>>> + return false;
>>> +
>>> + return true;
>>> +}
>>> +
>>> +static int cdn_dp_update_link_train(struct cdn_dp_device *dp)
>>> +{
>>> + int ret;
>>> +
>>> + cdn_dp_set_signal_levels(dp);
>>> +
>>> + ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
>>> + dp->train_set, dp->link.num_lanes);
>>> + if (ret != dp->link.num_lanes)
>>> + return -EINVAL;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int cdn_dp_set_link_train(struct cdn_dp_device *dp,
>>> + uint8_t dp_train_pat)
>>> +{
>>> + uint8_t buf[sizeof(dp->train_set) + 1];
>>> + int ret, len;
>>> +
>>> + buf[0] = dp_train_pat;
>>> + if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) ==
>>> + DP_TRAINING_PATTERN_DISABLE) {
>>> + /* don't write DP_TRAINING_LANEx_SET on disable */
>>> + len = 1;
>>> + } else {
>>> + /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET
>>> */
>>> + memcpy(buf + 1, dp->train_set, dp->link.num_lanes);
>>> + len = dp->link.num_lanes + 1;
>>> + }
>>> +
>>> + ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_PATTERN_SET,
>>> + buf, len);
>>> + if (ret != len)
>>> + return -EINVAL;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int cdn_dp_reset_link_train(struct cdn_dp_device *dp,
>>> + uint8_t dp_train_pat)
>>> +{
>>> + int ret;
>>> +
>>> + memset(dp->train_set, 0, sizeof(dp->train_set));
>>> +
>>> + cdn_dp_set_signal_levels(dp);
>>> +
>>> + ret = cdn_dp_set_pattern(dp, dp_train_pat);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return cdn_dp_set_link_train(dp, dp_train_pat);
>>> +}
>>> +
>>> +/* Enable corresponding port and start training pattern 1 */
>>> +static int cdn_dp_link_training_clock_recovery(struct cdn_dp_device *dp)
>>> +{
>>> + u8 voltage;
>>> + u8 link_status[DP_LINK_STATUS_SIZE];
>>> + u32 voltage_tries, max_vswing_tries;
>>> + int ret;
>>> +
>>> + /* clock recovery */
>>> + ret = cdn_dp_reset_link_train(dp, DP_TRAINING_PATTERN_1 |
>>> + DP_LINK_SCRAMBLING_DISABLE);
>>> + if (ret) {
>>> + DRM_ERROR("failed to start link train\n");
>>> + return ret;
>>> + }
>>> +
>>> + voltage_tries = 1;
>>> + max_vswing_tries = 0;
>>> + for (;;) {
>>> + drm_dp_link_train_clock_recovery_delay(dp->dpcd);
>>> + if (drm_dp_dpcd_read_link_status(&dp->aux, link_status)
>>> !=
>>> + DP_LINK_STATUS_SIZE) {
>>> + DRM_ERROR("failed to get link status\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (drm_dp_clock_recovery_ok(link_status,
>>> dp->link.num_lanes)) {
>>> + DRM_DEBUG_KMS("clock recovery OK\n");
>>> + return 0;
>>> + }
>>> +
>>> + if (voltage_tries >= 5) {
>>> + DRM_DEBUG_KMS("Same voltage tried 5 times\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (max_vswing_tries >= 1) {
>>> + DRM_DEBUG_KMS("Max Voltage Swing reached\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + voltage = dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
>>> +
>>> + /* Update training set as requested by target */
>>> + cdn_dp_get_adjust_train(dp, link_status);
>>> + if (cdn_dp_update_link_train(dp)) {
>>> + DRM_ERROR("failed to update link training\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if ((dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
>>> + voltage)
>>> + ++voltage_tries;
>>> + else
>>> + voltage_tries = 1;
>>> +
>>> + if (cdn_dp_link_max_vswing_reached(dp))
>>> + ++max_vswing_tries;
>>> + }
>>> +}
>>> +
>>> +static int cdn_dp_link_training_channel_equalization(struct
>>> cdn_dp_device *dp)
>>> +{
>>> + int tries, ret;
>>> + u32 training_pattern;
>>> + uint8_t link_status[DP_LINK_STATUS_SIZE];
>>> +
>>> + training_pattern = cdn_dp_select_chaneq_pattern(dp);
>>> + training_pattern |= DP_LINK_SCRAMBLING_DISABLE;
>>> +
>>> + ret = cdn_dp_set_pattern(dp, training_pattern);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = cdn_dp_set_link_train(dp, training_pattern);
>>> + if (ret) {
>>> + DRM_ERROR("failed to start channel equalization\n");
>>> + return ret;
>>> + }
>>> +
>>> + for (tries = 0; tries < 5; tries++) {
>>> + drm_dp_link_train_channel_eq_delay(dp->dpcd);
>>> + if (drm_dp_dpcd_read_link_status(&dp->aux, link_status)
>>> !=
>>> + DP_LINK_STATUS_SIZE) {
>>> + DRM_ERROR("failed to get link status\n");
>>> + break;
>>> + }
>>> +
>>> + /* Make sure clock is still ok */
>>> + if (!drm_dp_clock_recovery_ok(link_status,
>>> + dp->link.num_lanes)) {
>>> + DRM_DEBUG_KMS("Clock recovery check failed\n");
>>> + break;
>>> + }
>>> +
>>> + if (drm_dp_channel_eq_ok(link_status,
>>> dp->link.num_lanes)) {
>>> + DRM_DEBUG_KMS("Channel EQ done\n");
>>> + return 0;
>>> + }
>>> +
>>> + /* Update training set as requested by target */
>>> + cdn_dp_get_adjust_train(dp, link_status);
>>> + if (cdn_dp_update_link_train(dp)) {
>>> + DRM_ERROR("failed to update link training\n");
>>> + break;
>>> + }
>>> + }
>>> +
>>> + /* Try 5 times, else fail and try at lower BW */
>>> + if (tries == 5)
>>> + DRM_DEBUG_KMS("Channel equalization failed 5 times\n");
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +static int cdn_dp_stop_link_train(struct cdn_dp_device *dp)
>>> +{
>>> + int ret = cdn_dp_set_pattern(dp, DP_TRAINING_PATTERN_DISABLE);
>>> +
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return cdn_dp_set_link_train(dp, DP_TRAINING_PATTERN_DISABLE);
>>> +}
>>> +
>>> +static int cdn_dp_get_lower_link_rate(struct cdn_dp_device *dp)
>>> +{
>>> + switch (dp->link.rate) {
>>> + case DP_LINK_BW_1_62:
>>> + return -EINVAL;
>>> + case DP_LINK_BW_2_7:
>>> + dp->link.rate = DP_LINK_BW_1_62;
>>> + break;
>>> + case DP_LINK_BW_5_4:
>>> + dp->link.rate = DP_LINK_BW_2_7;
>>> + break;
>>> + default:
>>> + dp->link.rate = DP_LINK_BW_5_4;
>>> + break;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +int cdn_dp_software_train_link(struct cdn_dp_device *dp)
>>> +{
>>> + int ret, stop_err;
>>> + u8 link_config[2];
>>> + u32 rate, sink_max, source_max;
>>> +
>>> + ret = drm_dp_dpcd_read(&dp->aux, DP_DPCD_REV, dp->dpcd,
>>> + sizeof(dp->dpcd));
>>> + if (ret < 0) {
>>> + DRM_DEV_ERROR(dp->dev, "Failed to get caps %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + source_max = dp->lanes;
>>> + sink_max = drm_dp_max_lane_count(dp->dpcd);
>>> + dp->link.num_lanes = min(source_max, sink_max);
>>> +
>>> + source_max = drm_dp_bw_code_to_link_rate(CDN_DP_MAX_LINK_RATE);
>>> + sink_max = drm_dp_max_link_rate(dp->dpcd);
>>> + rate = min(source_max, sink_max);
>>> + dp->link.rate = drm_dp_link_rate_to_bw_code(rate);
>>> +
>>> + link_config[0] = 0;
>>> + link_config[1] = 0;
>>> + if (dp->dpcd[DP_MAIN_LINK_CHANNEL_CODING] & 0x01)
>>> + link_config[1] = DP_SET_ANSI_8B10B;
>>> + drm_dp_dpcd_write(&dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
>>> +
>>> + while (true) {
>>> +
>>> + /* Write the link configuration data */
>>> + link_config[0] = dp->link.rate;
>>> + link_config[1] = dp->link.num_lanes;
>>> + if (drm_dp_enhanced_frame_cap(dp->dpcd))
>>> + link_config[1] |=
>>> DP_LANE_COUNT_ENHANCED_FRAME_EN;
>>> + drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, link_config,
>>> 2);
>>> +
>>> + ret = cdn_dp_link_training_clock_recovery(dp);
>>> + if (ret) {
>>> + if (!cdn_dp_get_lower_link_rate(dp))
>>> + continue;
>>> +
>>> + DRM_ERROR("training clock recovery failed: %d\n",
>>> ret);
>>> + break;
>>> + }
>>> +
>>> + ret = cdn_dp_link_training_channel_equalization(dp);
>>> + if (ret) {
>>> + if (!cdn_dp_get_lower_link_rate(dp))
>>> + continue;
>>> +
>>> + DRM_ERROR("training channel eq failed: %d\n",
>>> ret);
>>> + break;
>>> + }
>>> +
>>> + break;
>>> + }
>>> +
>>> + stop_err = cdn_dp_stop_link_train(dp);
>>> + if (stop_err) {
>>> + DRM_ERROR("stop training fail, error: %d\n", stop_err);
>>> + return stop_err;
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
>>> b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
>>> index 979355d..e1273e6 100644
>>> --- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
>>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
>>> @@ -17,7 +17,9 @@
>>> #include <linux/delay.h>
>>> #include <linux/io.h>
>>> #include <linux/iopoll.h>
>>> +#include <linux/phy/phy.h>
>>> #include <linux/reset.h>
>>> +#include <soc/rockchip/rockchip_phy_typec.h>
>>>
>>> #include "cdn-dp-core.h"
>>> #include "cdn-dp-reg.h"
>>> @@ -189,7 +191,7 @@ static int cdn_dp_mailbox_send(struct cdn_dp_device
>>> *dp, u8 module_id,
>>> return 0;
>>> }
>>>
>>> -static int cdn_dp_reg_write(struct cdn_dp_device *dp, u16 addr, u32 val)
>>> +int cdn_dp_reg_write(struct cdn_dp_device *dp, u16 addr, u32 val)
>>> {
>>> u8 msg[6];
>>>
>>> @@ -609,6 +611,31 @@ int cdn_dp_train_link(struct cdn_dp_device *dp)
>>> {
>>> int ret;
>>>
>>> + /*
>>> + * DP firmware uses fixed phy config values to do training, but
>>> some
>>> + * boards need to adjust these values to fit for their unique
>>> hardware
>>> + * design. So if the phy is using custom config values, do
>>> software
>>> + * link training instead of relying on firmware, if software
>>> training
>>> + * fail, keep firmware training as a fallback if sw training
>>> fails.
>>> + */
>>> + ret = cdn_dp_software_train_link(dp);
>>> + if (ret) {
>>> + DRM_DEV_ERROR(dp->dev,
>>> + "Failed to do software training %d\n", ret);
>>> + goto do_fw_training;
>>> + }
>>
>> If I understand correctly you are changing current behavior. Before
>> this patch, we use always firmware link training, and after this
>> patch, we always use software link training. If fails we use the
>> firmware link training.
>>
>> AFAIK my Samsung Chromebook Plus works well with firmware link
>> training, so there are any benefits of use software link training
>> instead of firmware link training?
>>
>> Looks to me that we should only do software link training on these
>> platforms that need it, so on those that define the phy-config
>> property in their DT and use by default firmware link training.
>
> Sean and me have discussed about that, and we all agree to use sw training
> instead the
> fw training to keep training process consistent, and we do not need add a
> varialbe in
> struct rockchip_typec_phy(like use_sw_training before) to distinguish sw and
> fw training.
> If training process implement correctly, sw training not different with fw
> training, and as my
> test so far, sw training work well on Kevin, ofcourse, we need keep testing
> it.
>
Ok, I can also confirm that software training works well on kevin.
Could you mention this change of behavior in the commit message? I
think that after these patches the firmware training is unlikely to
happen.
Thanks,
Enric
>>> + ret = cdn_dp_reg_write(dp, SOURCE_HDTX_CAR, 0xf);
>>> + if (ret) {
>>> + DRM_DEV_ERROR(dp->dev,
>>> + "Failed to write SOURCE_HDTX_CAR register %d\n", ret);
>>> + goto do_fw_training;
>>> + }
>>> + dp->use_fw_training = false;
>>> + return 0;
>>> +
>>> +do_fw_training:
>>> + dp->use_fw_training = true;
>>> + DRM_DEV_DEBUG_KMS(dp->dev, "use fw training\n");
>>> ret = cdn_dp_training_start(dp);
>>> if (ret) {
>>> DRM_DEV_ERROR(dp->dev, "Failed to start training %d\n",
>>> ret);
>>> @@ -623,7 +650,7 @@ int cdn_dp_train_link(struct cdn_dp_device *dp)
>>>
>>> DRM_DEV_DEBUG_KMS(dp->dev, "rate:0x%x, lanes:%d\n",
>>> dp->link.rate,
>>> dp->link.num_lanes);
>>> - return ret;
>>> + return 0;
>>> }
>>>
>>> int cdn_dp_set_video_status(struct cdn_dp_device *dp, int active)
>>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-reg.h
>>> b/drivers/gpu/drm/rockchip/cdn-dp-reg.h
>>> index 6580b11..3420771 100644
>>> --- a/drivers/gpu/drm/rockchip/cdn-dp-reg.h
>>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.h
>>> @@ -137,7 +137,7 @@
>>> #define HPD_EVENT_MASK 0x211c
>>> #define HPD_EVENT_DET 0x2120
>>>
>>> -/* dpyx framer addr */
>>> +/* dptx framer addr */
>>> #define DP_FRAMER_GLOBAL_CONFIG 0x2200
>>> #define DP_SW_RESET 0x2204
>>> #define DP_FRAMER_TU 0x2208
>>> @@ -431,6 +431,40 @@
>>> /* Reference cycles when using lane clock as reference */
>>> #define LANE_REF_CYC 0x8000
>>>
>>> +/* register CM_VID_CTRL */
>>> +#define LANE_VID_REF_CYC(x) (((x) & (BIT(24) - 1)) <<
>>> 0)
>>> +#define NMVID_MEAS_TOLERANCE(x) (((x) & 0xf) <<
>>> 24)
>>> +
>>> +/* register DP_TX_PHY_CONFIG_REG */
>>> +#define DP_TX_PHY_TRAINING_ENABLE(x) ((x) & 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_PRBS7 (0 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_TPS1 (1 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_TPS2 (2 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_TPS3 (3 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_TPS4 (4 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_PLTPAT (5 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_D10_2 (6 << 1)
>>> +#define DP_TX_PHY_TRAINING_TYPE_HBR2CPAT (8 << 1)
>>> +#define DP_TX_PHY_TRAINING_PATTERN(x) ((x) << 1)
>>> +#define DP_TX_PHY_SCRAMBLER_BYPASS(x) (((x) & 1) << 5)
>>> +#define DP_TX_PHY_ENCODER_BYPASS(x) (((x) & 1) << 6)
>>> +#define DP_TX_PHY_SKEW_BYPASS(x) (((x) & 1) << 7)
>>> +#define DP_TX_PHY_DISPARITY_RST(x) (((x) & 1) << 8)
>>> +#define DP_TX_PHY_LANE0_SKEW(x) (((x) & 7) << 9)
>>> +#define DP_TX_PHY_LANE1_SKEW(x) (((x) & 7) << 12)
>>> +#define DP_TX_PHY_LANE2_SKEW(x) (((x) & 7) << 15)
>>> +#define DP_TX_PHY_LANE3_SKEW(x) (((x) & 7) << 18)
>>> +#define DP_TX_PHY_10BIT_ENABLE(x) (((x) & 1) << 21)
>>> +
>>> +/* register DP_FRAMER_GLOBAL_CONFIG */
>>> +#define NUM_LANES(x) ((x) & 3)
>>> +#define SST_MODE (0 << 2)
>>> +#define RG_EN (0 << 4)
>>> +#define GLOBAL_EN BIT(3)
>>> +#define NO_VIDEO BIT(5)
>>> +#define ENC_RST_DIS BIT(6)
>>> +#define WR_VHSYNC_FALL BIT(7)
>>> +
>>> enum voltage_swing_level {
>>> VOLTAGE_LEVEL_0,
>>> VOLTAGE_LEVEL_1,
>>> @@ -476,6 +510,7 @@ int cdn_dp_set_host_cap(struct cdn_dp_device *dp, u8
>>> lanes, bool flip);
>>> int cdn_dp_event_config(struct cdn_dp_device *dp);
>>> u32 cdn_dp_get_event(struct cdn_dp_device *dp);
>>> int cdn_dp_get_hpd_status(struct cdn_dp_device *dp);
>>> +int cdn_dp_reg_write(struct cdn_dp_device *dp, u16 addr, u32 val);
>>> ssize_t cdn_dp_dpcd_write(struct cdn_dp_device *dp, u32 addr,
>>> u8 *data, u16 len);
>>> ssize_t cdn_dp_dpcd_read(struct cdn_dp_device *dp, u32 addr,
>>> @@ -489,4 +524,5 @@ int cdn_dp_config_video(struct cdn_dp_device *dp);
>>> int cdn_dp_audio_stop(struct cdn_dp_device *dp, struct audio_info
>>> *audio);
>>> int cdn_dp_audio_mute(struct cdn_dp_device *dp, bool enable);
>>> int cdn_dp_audio_config(struct cdn_dp_device *dp, struct audio_info
>>> *audio);
>>> +int cdn_dp_software_train_link(struct cdn_dp_device *dp);
>>> #endif /* _CDN_DP_REG_H */
>>> --
>>> 2.7.4
>>>
>>
>>
>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
