Hi Enric,
On 18/05/2018 18:19, Enric Balletbo Serra wrote:
> Hi Neil,
>
> 2018-05-18 15:05 GMT+02:00 Neil Armstrong <narmstrong@xxxxxxxxxxxx>:
>> The EC can expose a CEC bus, this patch adds the CEC related definitions
>> needed by the cros-ec-cec driver.
>> Having a 16 byte mkbp event size makes it possible to send CEC
>> messages from the EC to the AP directly inside the mkbp event
>> instead of first doing a notification and then a read.
>>
>> Signed-off-by: Stefan Adolfsson <sadolfsson@xxxxxxxxxxxx>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>> drivers/platform/chrome/cros_ec_proto.c | 40 +++++++++++++----
>> include/linux/mfd/cros_ec.h | 2 +-
>> include/linux/mfd/cros_ec_commands.h | 80 +++++++++++++++++++++++++++++++++
>> 3 files changed, 112 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
>> index e7bbdf9..c4f6c44 100644
>> --- a/drivers/platform/chrome/cros_ec_proto.c
>> +++ b/drivers/platform/chrome/cros_ec_proto.c
>> @@ -504,10 +504,31 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
>> }
>> EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
>>
>> +static int get_next_event_xfer(struct cros_ec_device *ec_dev,
>> + struct cros_ec_command *msg,
>> + int version, uint32_t size)
>> +{
>> + int ret;
>> +
>> + msg->version = version;
>> + msg->command = EC_CMD_GET_NEXT_EVENT;
>> + msg->insize = size;
>> + msg->outsize = 0;
>> +
>> + ret = cros_ec_cmd_xfer(ec_dev, msg);
>> + if (ret > 0) {
>> + ec_dev->event_size = ret - 1;
>> + memcpy(&ec_dev->event_data, msg->data, ec_dev->event_size);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> static int get_next_event(struct cros_ec_device *ec_dev)
>> {
>> u8 buffer[sizeof(struct cros_ec_command) + sizeof(ec_dev->event_data)];
>> struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
>> + static int cmd_version = 1;
>
> Personal opinion, but I don't like this static here, and also I don't
> think this is scalable. Could we ask for the command version?
I don't have an opinion, I only followed how it was implemented on the
chromeos kernel and adapted to mainline. If you have a better way, I'll use it !
>
>> int ret;
>>
>> if (ec_dev->suspended) {
>> @@ -515,18 +536,19 @@ static int get_next_event(struct cros_ec_device *ec_dev)
>> return -EHOSTDOWN;
>> }
>>
>> - msg->version = 0;
>> - msg->command = EC_CMD_GET_NEXT_EVENT;
>> - msg->insize = sizeof(ec_dev->event_data);
>> - msg->outsize = 0;
>> + if (cmd_version == 1) {
>> + ret = get_next_event_xfer(ec_dev, msg, cmd_version,
>> + sizeof(struct ec_response_get_next_event_v1));
>> + if (ret < 0 || msg->result != EC_RES_INVALID_VERSION)
>> + return ret;
>>
>> - ret = cros_ec_cmd_xfer(ec_dev, msg);
>> - if (ret > 0) {
>> - ec_dev->event_size = ret - 1;
>> - memcpy(&ec_dev->event_data, msg->data,
>> - sizeof(ec_dev->event_data));
>> + /* Fallback to version 0 for future send attempts */
>> + cmd_version = 0;
>> }
>>
>
> So we always do a failed transfer on all these EC devices that does
> not support CEC. I am wondering if wouldn't be better pass the command
> version to the cros_ec_get_next_event function. The driver should know
> which version to use, just a random idea.
No, the driver cannot know the command version, this depends on the FW version
and the platform. AFAIK this must be discovered.
>
>> + ret = get_next_event_xfer(ec_dev, msg, cmd_version,
>> + sizeof(struct ec_response_get_next_event));
>> +
>> return ret;
>> }
>>
>> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
>> index f36125e..32caef3 100644
>> --- a/include/linux/mfd/cros_ec.h
>> +++ b/include/linux/mfd/cros_ec.h
>> @@ -147,7 +147,7 @@ struct cros_ec_device {
>> bool mkbp_event_supported;
>> struct blocking_notifier_head event_notifier;
>>
>> - struct ec_response_get_next_event event_data;
>> + struct ec_response_get_next_event_v1 event_data;
>> int event_size;
>> u32 host_event_wake_mask;
>> };
>> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
>> index f2edd99..16c3a2b 100644
>> --- a/include/linux/mfd/cros_ec_commands.h
>> +++ b/include/linux/mfd/cros_ec_commands.h
>
> This file is going to be very big and as requested by Lee I plan to
> convert this file to the kernel-doc format, this patch introduces some
> new structs so could you document the new structs in the suggested
> format?
Ok
>
>> @@ -804,6 +804,8 @@ enum ec_feature_code {
>> EC_FEATURE_MOTION_SENSE_FIFO = 24,
>> /* EC has RTC feature that can be controlled by host commands */
>> EC_FEATURE_RTC = 27,
>> + /* EC supports CEC commands */
>> + EC_FEATURE_CEC = 35,
>> };
>>
>> #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
>> @@ -2078,6 +2080,12 @@ enum ec_mkbp_event {
>> /* EC sent a sysrq command */
>> EC_MKBP_EVENT_SYSRQ = 6,
>>
>> + /* Notify the AP that something happened on CEC */
>> + EC_MKBP_CEC_EVENT = 8,
>> +
>> + /* Send an incoming CEC message to the AP */
>> + EC_MKBP_EVENT_CEC_MESSAGE = 9,
>> +
>> /* Number of MKBP events */
>> EC_MKBP_EVENT_COUNT,
>> };
>> @@ -2093,12 +2101,31 @@ union ec_response_get_next_data {
>> uint32_t sysrq;
>> } __packed;
>>
>> +union ec_response_get_next_data_v1 {
>> + uint8_t key_matrix[16];
>> +
>> + /* Unaligned */
>> + uint32_t host_event;
>> +
>> + uint32_t buttons;
>> + uint32_t switches;
>> + uint32_t sysrq;
>> + uint32_t cec_events;
>> + uint8_t cec_message[16];
>> +} __packed;
>> +
>> struct ec_response_get_next_event {
>> uint8_t event_type;
>> /* Followed by event data if any */
>> union ec_response_get_next_data data;
>> } __packed;
>>
>> +struct ec_response_get_next_event_v1 {
>> + uint8_t event_type;
>> + /* Followed by event data if any */
>> + union ec_response_get_next_data_v1 data;
>> +} __packed;
>> +
>> /* Bit indices for buttons and switches.*/
>> /* Buttons */
>> #define EC_MKBP_POWER_BUTTON 0
>> @@ -2828,6 +2855,59 @@ struct ec_params_reboot_ec {
>> /* Current version of ACPI memory address space */
>> #define EC_ACPI_MEM_VERSION_CURRENT 1
>>
>> +/*****************************************************************************/
>> +/*
>> + * HDMI CEC commands
>> + *
>> + * These commands are for sending and receiving message via HDMI CEC
>> + */
>> +#define MAX_CEC_MSG_LEN 16
>> +
>> +/* CEC message from the AP to be written on the CEC bus */
>> +#define EC_CMD_CEC_WRITE_MSG 0x00B8
>> +
>> +/* Message to write to the CEC bus */
>> +struct ec_params_cec_write {
>> + uint8_t msg[MAX_CEC_MSG_LEN];
>> +} __packed;
>> +
>> +/* Set various CEC parameters */
>> +#define EC_CMD_CEC_SET 0x00BA
>> +
>> +struct ec_params_cec_set {
>> + uint8_t cmd; /* enum cec_command */
>> + union {
>> + uint8_t enable;
>> + uint8_t address;
>> + };
>> +} __packed;
>> +
>> +/* Read various CEC parameters */
>> +#define EC_CMD_CEC_GET 0x00BB
>> +
>> +struct ec_params_cec_get {
>> + uint8_t cmd; /* enum cec_command */
>> +} __packed;
>> +
>> +struct ec_response_cec_get {
>> + union {
>> + uint8_t enable;
>> + uint8_t address;
>> + };
>> +} __packed;
>> +
>> +enum cec_command {
>> + /* CEC reading, writing and events enable */
>> + CEC_CMD_ENABLE,
>> + /* CEC logical address */
>> + CEC_CMD_LOGICAL_ADDRESS,
>> +};
>> +
>> +/* Events from CEC to AP */
>> +enum mkbp_cec_event {
>> + EC_MKBP_CEC_SEND_OK = 1 << 0,
>> + EC_MKBP_CEC_SEND_FAILED = 1 << 1,
>
> Use the BIT() macro.
Ok
>
>> +};
>>
>> /*****************************************************************************/
>> /*
>> --
>> 2.7.4
>>
>
> Thanks,
> Enric
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
