On 14.05.2018 11:38, Philippe CORNU wrote: > Hi Laurent, Archit, Andrzej & Yannick, > > Do you have any comments on this v2 driver part? > (more details regarding v1/v2 differences in the cover letter > https://www.spinics.net/lists/dri-devel/msg174137.html) > > Thank you, > Philippe :-) > > > On 04/25/2018 09:53 AM, Philippe Cornu wrote: >> Add the optional power supplies using the description found in >> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)". >> >> The sii902x input IOs are not "io safe" so it is important to >> enable/disable voltage regulators during probe/remove phases to >> avoid damages. What exactly does it mean? Ie I understand that the chip has some limitations, but why enabling/disabling regulators in probe/remove should solve it? Regards Andrzej >> >> Signed-off-by: Philippe Cornu <philippe.cornu@xxxxxx> >> --- >> drivers/gpu/drm/bridge/sii902x.c | 38 ++++++++++++++++++++++++++++++++++---- >> 1 file changed, 34 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c >> index 60373d7eb220..c367d7b91ade 100644 >> --- a/drivers/gpu/drm/bridge/sii902x.c >> +++ b/drivers/gpu/drm/bridge/sii902x.c >> @@ -24,6 +24,7 @@ >> #include <linux/i2c.h> >> #include <linux/module.h> >> #include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> >> #include <drm/drmP.h> >> #include <drm/drm_atomic_helper.h> >> @@ -86,6 +87,7 @@ struct sii902x { >> struct drm_bridge bridge; >> struct drm_connector connector; >> struct gpio_desc *reset_gpio; >> + struct regulator_bulk_data supplies[2]; >> }; >> >> static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge) >> @@ -392,23 +394,42 @@ static int sii902x_probe(struct i2c_client *client, >> return PTR_ERR(sii902x->reset_gpio); >> } >> >> + sii902x->supplies[0].supply = "iovcc"; >> + sii902x->supplies[1].supply = "vcc12"; >> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sii902x->supplies), >> + sii902x->supplies); >> + if (ret) { >> + dev_err(dev, "Failed to get power supplies: %d\n", ret); >> + return ret; >> + } >> + >> + ret = regulator_bulk_enable(ARRAY_SIZE(sii902x->supplies), >> + sii902x->supplies); >> + if (ret) { >> + dev_err(dev, "Failed to enable power supplies: %d\n", ret); >> + return ret; >> + } >> + >> + usleep_range(10000, 20000); >> + >> sii902x_reset(sii902x); >> >> ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0); >> if (ret) >> - return ret; >> + goto err_disable_regulator; >> >> ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0), >> &chipid, 4); >> if (ret) { >> dev_err(dev, "regmap_read failed %d\n", ret); >> - return ret; >> + goto err_disable_regulator; >> } >> >> if (chipid[0] != 0xb0) { >> dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n", >> chipid[0]); >> - return -EINVAL; >> + ret = -EINVAL; >> + goto err_disable_regulator; >> } >> >> /* Clear all pending interrupts */ >> @@ -424,7 +445,7 @@ static int sii902x_probe(struct i2c_client *client, >> IRQF_ONESHOT, dev_name(dev), >> sii902x); >> if (ret) >> - return ret; >> + goto err_disable_regulator; >> } >> >> sii902x->bridge.funcs = &sii902x_bridge_funcs; >> @@ -434,6 +455,12 @@ static int sii902x_probe(struct i2c_client *client, >> i2c_set_clientdata(client, sii902x); >> >> return 0; >> + >> +err_disable_regulator: >> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies), >> + sii902x->supplies); >> + >> + return ret; >> } >> >> static int sii902x_remove(struct i2c_client *client) >> @@ -443,6 +470,9 @@ static int sii902x_remove(struct i2c_client *client) >> >> drm_bridge_remove(&sii902x->bridge); >> >> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies), >> + sii902x->supplies); >> + >> return 0; >> } >> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
