Hi Lin, 2018-05-11 16:43 GMT+02:00 Sean Paul <seanpaul@xxxxxxxxxxxx>: > On Wed, May 09, 2018 at 06:22:43PM +0800, Lin Huang wrote: >> If want to do training outside DP Firmware, need phy voltage swing >> and pre_emphasis value. >> >> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx> > > Adding Rob Herring so he has a hope of seeing this. > And adding the devicetree ML, otherwise Rob will probably ignore the patch. >> --- >> Changes in v2: >> - rebase >> >> Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >> index 960da7f..eda26dd 100644 >> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >> @@ -17,7 +17,9 @@ Required properties: >> >> Optional properties: >> - extcon : extcon specifier for the Power Delivery >> - >> + - rockchip,phy_config : That's phy voltage swing and pre_emphasis >> + setting, if want to do dp training outside >> + dp firmware, need to add these value. > > What are the units? > Also, I think that will be good add an example or include the property in the current examples to see how works. It's not clear from the property description. I suppose it is an array of pairs <swing pre-emphasis>? nit: -rockchip,phy_config: A list of voltage swing (unit) and pre-emphasis (unit) pairs. Use this property to enable software link training instead of hardware link training. Best regards, Enric > Sean > >> Required nodes : a sub-node is required for each port the phy provides. >> The sub-node name is used to identify dp or usb3 port, >> and shall be the following entries: >> -- >> 2.7.4 >> > > -- > Sean Paul, Software Engineer, Google / Chromium OS _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
