On Fri, May 11, 2018 at 08:19:33PM +0530, Rajesh Yadav wrote:
> MDSS and dpu drivers manage their respective clocks via
> runtime_pm. Remove custom clock management code from
> dpu_power_handle.
>
> Also dpu core clock management code is restricted to
> dpu_core_perf module.
>
> Changes in v2:
> - remove local variable to hold and return error code
> in _dpu_core_perf_set_core_clk_rate() instead return
> retcode directly from msm_dss_clk_set_rate() call (Sean Paul)
> - dpu_core_perf_init() is called from dpu_kms_hw_init() and
> most of the params passed are already validated so remove
> redundant checks from dpu_core_perf_init() (Sean Paul)
> - return &mp->clk_config[i] directly to avoid local variable
> in _dpu_kms_get_clk() (Sean Paul)
> - invert conditional check to eliminate local rate variable
> from dpu_kms_get_clk_rate() (Sean Paul)
> - remove end label from dpu_power_resource_init() and return
> directly on dpu_power_parse_dt_supply() failure as no cleanup
> is needed (Sean Paul)
> - remove checks for vtotal and vrefresh from
> dpu_encoder_phys_cmd_tearcheck_config() as they should be
> valid in mode_set call (Sean Paul)
>
> Signed-off-by: Rajesh Yadav <ryadav@xxxxxxxxxxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 41 ++---
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 8 +-
> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 9 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 28 ++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 9 +
> drivers/gpu/drm/msm/dpu_power_handle.c | 196 +--------------------
> drivers/gpu/drm/msm/dpu_power_handle.h | 40 -----
> 7 files changed, 63 insertions(+), 268 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 981f77f..5b79077 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -365,6 +365,17 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
> }
> }
>
> +static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
> +{
> + struct dss_clk *core_clk = kms->perf.core_clk;
> +
> + if (core_clk->max_rate && (rate > core_clk->max_rate))
> + rate = core_clk->max_rate;
> +
> + core_clk->rate = rate;
> + return msm_dss_clk_set_rate(core_clk, 1);
> +}
> +
> static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
> {
> u64 clk_rate = kms->perf.perf_tune.min_core_clk;
> @@ -376,7 +387,8 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
> dpu_cstate = to_dpu_crtc_state(crtc->state);
> clk_rate = max(dpu_cstate->new_perf.core_clk_rate,
> clk_rate);
> - clk_rate = clk_round_rate(kms->perf.core_clk, clk_rate);
> + clk_rate = clk_round_rate(kms->perf.core_clk->clk,
> + clk_rate);
> }
> }
>
> @@ -484,15 +496,11 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
>
> DPU_EVT32(kms->dev, stop_req, clk_rate);
>
> - /* Temp change to avoid crash in clk_set_rate API. */
> -#ifdef QCOM_DPU_SET_CLK
> - if (dpu_power_clk_set_rate(&priv->phandle,
> - kms->perf.clk_name, clk_rate)) {
> + if (_dpu_core_perf_set_core_clk_rate(kms, clk_rate)) {
> DPU_ERROR("failed to set %s clock rate %llu\n",
> - kms->perf.clk_name, clk_rate);
> + kms->perf.core_clk->clk_name, clk_rate);
> return;
> }
> -#endif
>
> kms->perf.core_clk_rate = clk_rate;
> DPU_DEBUG("update clk rate = %lld HZ\n", clk_rate);
> @@ -656,7 +664,6 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf)
> dpu_core_perf_debugfs_destroy(perf);
> perf->max_core_clk_rate = 0;
> perf->core_clk = NULL;
> - perf->clk_name = NULL;
> perf->phandle = NULL;
> perf->catalog = NULL;
> perf->dev = NULL;
> @@ -667,9 +674,9 @@ int dpu_core_perf_init(struct dpu_core_perf *perf,
> struct dpu_mdss_cfg *catalog,
> struct dpu_power_handle *phandle,
> struct dpu_power_client *pclient,
> - char *clk_name)
> + struct dss_clk *core_clk)
> {
> - if (!perf || !dev || !catalog || !phandle || !pclient || !clk_name) {
> + if (!pclient) {
> DPU_ERROR("invalid parameters\n");
> return -EINVAL;
> }
> @@ -678,23 +685,13 @@ int dpu_core_perf_init(struct dpu_core_perf *perf,
> perf->catalog = catalog;
> perf->phandle = phandle;
> perf->pclient = pclient;
> - perf->clk_name = clk_name;
> -
> - perf->core_clk = dpu_power_clk_get_clk(phandle, clk_name);
> - if (!perf->core_clk) {
> - DPU_ERROR("invalid core clk\n");
> - goto err;
> - }
> + perf->core_clk = core_clk;
>
> - perf->max_core_clk_rate = dpu_power_clk_get_max_rate(phandle, clk_name);
> + perf->max_core_clk_rate = core_clk->max_rate;
> if (!perf->max_core_clk_rate) {
> DPU_DEBUG("optional max core clk rate, use default\n");
> perf->max_core_clk_rate = DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE;
> }
>
> return 0;
> -
> -err:
> - dpu_core_perf_destroy(perf);
> - return -ENODEV;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> index 1965ff5..9c1a719 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> @@ -54,7 +54,6 @@ struct dpu_core_perf_tune {
> * @catalog: Pointer to catalog configuration
> * @phandle: Pointer to power handler
> * @pclient: Pointer to power client
> - * @clk_name: core clock name
> * @core_clk: Pointer to core clock structure
> * @core_clk_rate: current core clock rate
> * @max_core_clk_rate: maximum allowable core clock rate
> @@ -70,8 +69,7 @@ struct dpu_core_perf {
> struct dpu_mdss_cfg *catalog;
> struct dpu_power_handle *phandle;
> struct dpu_power_client *pclient;
> - char *clk_name;
> - struct clk *core_clk;
> + struct dss_clk *core_clk;
> u64 core_clk_rate;
> u64 max_core_clk_rate;
> struct dpu_core_perf_tune perf_tune;
> @@ -118,14 +116,14 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> * @catalog: Pointer to catalog
> * @phandle: Pointer to power handle
> * @pclient: Pointer to power client
> - * @clk_name: core clock name
> + * @core_clk: pointer to core clock
> */
> int dpu_core_perf_init(struct dpu_core_perf *perf,
> struct drm_device *dev,
> struct dpu_mdss_cfg *catalog,
> struct dpu_power_handle *phandle,
> struct dpu_power_client *pclient,
> - char *clk_name);
> + struct dss_clk *core_clk);
>
> /**
> * dpu_core_perf_debugfs_init - initialize debugfs for core performance context
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 072939c..388de38 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -428,11 +428,10 @@ static void dpu_encoder_phys_cmd_tearcheck_config(
> * vsync_count is ratio of MDP VSYNC clock frequency to LCD panel
> * frequency divided by the no. of rows (lines) in the LCDpanel.
> */
> - vsync_hz = dpu_power_clk_get_rate(&priv->phandle, "vsync_clk");
> - if (!vsync_hz || !mode->vtotal || !mode->vrefresh) {
> - DPU_DEBUG_CMDENC(cmd_enc,
> - "invalid params - vsync_hz %u vtot %u vrefresh %u\n",
> - vsync_hz, mode->vtotal, mode->vrefresh);
> + vsync_hz = dpu_kms_get_clk_rate(dpu_kms, "vsync_clk");
> + if (vsync_hz <= 0) {
> + DPU_DEBUG_CMDENC(cmd_enc, "invalid - vsync_hz %u\n",
> + vsync_hz);
> return;
> }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index cda4d12..349bda5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1499,6 +1499,31 @@ static int _dpu_kms_mmu_init(struct dpu_kms *dpu_kms)
> return ret;
> }
>
> +static struct dss_clk *_dpu_kms_get_clk(struct dpu_kms *dpu_kms,
> + char *clock_name)
> +{
> + struct dss_module_power *mp = &dpu_kms->mp;
> + int i;
> +
> + for (i = 0; i < mp->num_clk; i++) {
> + if (!strcmp(mp->clk_config[i].clk_name, clock_name))
> + return &mp->clk_config[i];
> + }
> +
> + return NULL;
> +}
> +
> +u64 dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
> +{
> + struct dss_clk *clk;
> +
> + clk = _dpu_kms_get_clk(dpu_kms, clock_name);
> + if (!clk)
> + return -EINVAL;
> +
> + return clk_get_rate(clk->clk);
> +}
> +
> static void dpu_kms_handle_power_event(u32 event_type, void *usr)
> {
> struct dpu_kms *dpu_kms = usr;
> @@ -1696,7 +1721,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> #endif
>
> rc = dpu_core_perf_init(&dpu_kms->perf, dev, dpu_kms->catalog,
> - &priv->phandle, priv->pclient, "core_clk");
> + &priv->phandle, priv->pclient,
> + _dpu_kms_get_clk(dpu_kms, "core_clk"));
> if (rc) {
> DPU_ERROR("failed to init perf %d\n", rc);
> goto perf_err;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> index 3c69921..a8255fe 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> @@ -537,4 +537,13 @@ struct dpu_kms_fbo *dpu_kms_fbo_alloc(struct drm_device *dev,
>
> void dpu_kms_encoder_enable(struct drm_encoder *encoder);
>
> +/**
> + * dpu_kms_get_clk_rate() - get the clock rate
> + * @dpu_kms: poiner to dpu_kms structure
> + * @clock_name: clock name to get the rate
> + *
> + * Return: current clock rate
> + */
> +u64 dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name);
> +
> #endif /* __dpu_kms_H__ */
> diff --git a/drivers/gpu/drm/msm/dpu_power_handle.c b/drivers/gpu/drm/msm/dpu_power_handle.c
> index e9e344a..12602ae 100644
> --- a/drivers/gpu/drm/msm/dpu_power_handle.c
> +++ b/drivers/gpu/drm/msm/dpu_power_handle.c
> @@ -13,7 +13,6 @@
>
> #define pr_fmt(fmt) "[drm:%s:%d]: " fmt, __func__, __LINE__
>
> -#include <linux/clk.h>
> #include <linux/kernel.h>
> #include <linux/of.h>
> #include <linux/string.h>
> @@ -246,62 +245,6 @@ static int dpu_power_parse_dt_supply(struct platform_device *pdev,
> return rc;
> }
>
> -static int dpu_power_parse_dt_clock(struct platform_device *pdev,
> - struct dss_module_power *mp)
> -{
> - u32 i = 0, rc = 0;
> - const char *clock_name;
> - u32 clock_rate = 0;
> - u32 clock_max_rate = 0;
> - int num_clk = 0;
> -
> - if (!pdev || !mp) {
> - pr_err("invalid input param pdev:%pK mp:%pK\n", pdev, mp);
> - return -EINVAL;
> - }
> -
> - mp->num_clk = 0;
> - num_clk = of_property_count_strings(pdev->dev.of_node,
> - "clock-names");
> - if (num_clk <= 0) {
> - pr_debug("clocks are not defined\n");
> - goto clk_err;
> - }
> -
> - mp->num_clk = num_clk;
> - mp->clk_config = devm_kzalloc(&pdev->dev,
> - sizeof(struct dss_clk) * num_clk, GFP_KERNEL);
> - if (!mp->clk_config) {
> - rc = -ENOMEM;
> - mp->num_clk = 0;
> - goto clk_err;
> - }
> -
> - for (i = 0; i < num_clk; i++) {
> - of_property_read_string_index(pdev->dev.of_node, "clock-names",
> - i, &clock_name);
> - strlcpy(mp->clk_config[i].clk_name, clock_name,
> - sizeof(mp->clk_config[i].clk_name));
> -
> - of_property_read_u32_index(pdev->dev.of_node, "clock-rate",
> - i, &clock_rate);
> - mp->clk_config[i].rate = clock_rate;
> -
> - if (!clock_rate)
> - mp->clk_config[i].type = DSS_CLK_AHB;
> - else
> - mp->clk_config[i].type = DSS_CLK_PCLK;
> -
> - clock_max_rate = 0;
> - of_property_read_u32_index(pdev->dev.of_node, "clock-max-rate",
> - i, &clock_max_rate);
> - mp->clk_config[i].max_rate = clock_max_rate;
> - }
> -
> -clk_err:
> - return rc;
> -}
> -
> #ifdef CONFIG_QCOM_BUS_SCALING
>
> #define MAX_AXI_PORT_COUNT 3
> @@ -681,16 +624,10 @@ int dpu_power_resource_init(struct platform_device *pdev,
> mp = &phandle->mp;
> phandle->dev = &pdev->dev;
>
> - rc = dpu_power_parse_dt_clock(pdev, mp);
> - if (rc) {
> - pr_err("device clock parsing failed\n");
> - goto end;
> - }
> -
> rc = dpu_power_parse_dt_supply(pdev, mp);
> if (rc) {
> pr_err("device vreg supply parsing failed\n");
> - goto parse_vreg_err;
> + return rc;
> }
>
> rc = msm_dss_config_vreg(&pdev->dev,
> @@ -700,18 +637,6 @@ int dpu_power_resource_init(struct platform_device *pdev,
> goto vreg_err;
> }
>
> - rc = msm_dss_get_clk(&pdev->dev, mp->clk_config, mp->num_clk);
> - if (rc) {
> - pr_err("clock get failed rc=%d\n", rc);
> - goto clk_err;
> - }
> -
> - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> - if (rc) {
> - pr_err("clock set rate failed rc=%d\n", rc);
> - goto bus_err;
> - }
> -
> rc = dpu_power_reg_bus_parse(pdev, phandle);
> if (rc) {
> pr_err("register bus parse failed rc=%d\n", rc);
> @@ -742,18 +667,11 @@ int dpu_power_resource_init(struct platform_device *pdev,
> dpu_power_data_bus_unregister(&phandle->data_bus_handle[i]);
> dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
> bus_err:
> - msm_dss_put_clk(mp->clk_config, mp->num_clk);
> -clk_err:
> msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
> vreg_err:
> if (mp->vreg_config)
> devm_kfree(&pdev->dev, mp->vreg_config);
> mp->num_vreg = 0;
> -parse_vreg_err:
> - if (mp->clk_config)
> - devm_kfree(&pdev->dev, mp->clk_config);
> - mp->num_clk = 0;
> -end:
> return rc;
> }
>
> @@ -796,19 +714,12 @@ void dpu_power_resource_deinit(struct platform_device *pdev,
>
> dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
>
> - msm_dss_put_clk(mp->clk_config, mp->num_clk);
> -
> msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
>
> - if (mp->clk_config)
> - devm_kfree(&pdev->dev, mp->clk_config);
> -
> if (mp->vreg_config)
> devm_kfree(&pdev->dev, mp->vreg_config);
>
> mp->num_vreg = 0;
> - mp->num_clk = 0;
> -
> }
>
> int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> @@ -885,12 +796,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> goto reg_bus_hdl_err;
> }
>
> - rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
> - if (rc) {
> - pr_err("clock enable failed rc:%d\n", rc);
> - goto clk_err;
> - }
> -
> dpu_power_event_trigger_locked(phandle,
> DPU_POWER_EVENT_POST_ENABLE);
>
> @@ -898,8 +803,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> dpu_power_event_trigger_locked(phandle,
> DPU_POWER_EVENT_PRE_DISABLE);
>
> - msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
> -
> dpu_power_reg_bus_update(phandle->reg_bus_hdl,
> max_usecase_ndx);
>
> @@ -917,8 +820,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> mutex_unlock(&phandle->phandle_lock);
> return rc;
>
> -clk_err:
> - dpu_power_reg_bus_update(phandle->reg_bus_hdl, prev_usecase_ndx);
> reg_bus_hdl_err:
> msm_dss_enable_vreg(mp->vreg_config, mp->num_vreg, 0);
> vreg_err:
> @@ -930,101 +831,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> return rc;
> }
>
> -int dpu_power_clk_set_rate(struct dpu_power_handle *phandle, char *clock_name,
> - u64 rate)
> -{
> - int i, rc = -EINVAL;
> - struct dss_module_power *mp;
> -
> - if (!phandle) {
> - pr_err("invalid input power handle\n");
> - return -EINVAL;
> - }
> - mp = &phandle->mp;
> -
> - for (i = 0; i < mp->num_clk; i++) {
> - if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
> - if (mp->clk_config[i].max_rate &&
> - (rate > mp->clk_config[i].max_rate))
> - rate = mp->clk_config[i].max_rate;
> -
> - mp->clk_config[i].rate = rate;
> - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> - break;
> - }
> - }
> -
> - return rc;
> -}
> -
> -u64 dpu_power_clk_get_rate(struct dpu_power_handle *phandle, char *clock_name)
> -{
> - int i;
> - struct dss_module_power *mp;
> - u64 rate = -EINVAL;
> -
> - if (!phandle) {
> - pr_err("invalid input power handle\n");
> - return -EINVAL;
> - }
> - mp = &phandle->mp;
> -
> - for (i = 0; i < mp->num_clk; i++) {
> - if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
> - rate = clk_get_rate(mp->clk_config[i].clk);
> - break;
> - }
> - }
> -
> - return rate;
> -}
> -
> -u64 dpu_power_clk_get_max_rate(struct dpu_power_handle *phandle,
> - char *clock_name)
> -{
> - int i;
> - struct dss_module_power *mp;
> - u64 rate = 0;
> -
> - if (!phandle) {
> - pr_err("invalid input power handle\n");
> - return 0;
> - }
> - mp = &phandle->mp;
> -
> - for (i = 0; i < mp->num_clk; i++) {
> - if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
> - rate = mp->clk_config[i].max_rate;
> - break;
> - }
> - }
> -
> - return rate;
> -}
> -
> -struct clk *dpu_power_clk_get_clk(struct dpu_power_handle *phandle,
> - char *clock_name)
> -{
> - int i;
> - struct dss_module_power *mp;
> - struct clk *clk = NULL;
> -
> - if (!phandle) {
> - pr_err("invalid input power handle\n");
> - return 0;
> - }
> - mp = &phandle->mp;
> -
> - for (i = 0; i < mp->num_clk; i++) {
> - if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
> - clk = mp->clk_config[i].clk;
> - break;
> - }
> - }
> -
> - return clk;
> -}
> -
> struct dpu_power_event *dpu_power_handle_register_event(
> struct dpu_power_handle *phandle,
> u32 event_type, void (*cb_fnc)(u32 event_type, void *usr),
> diff --git a/drivers/gpu/drm/msm/dpu_power_handle.h b/drivers/gpu/drm/msm/dpu_power_handle.h
> index 1edae5c..83f048d 100644
> --- a/drivers/gpu/drm/msm/dpu_power_handle.h
> +++ b/drivers/gpu/drm/msm/dpu_power_handle.h
> @@ -230,46 +230,6 @@ int dpu_power_data_bus_state_update(struct dpu_power_handle *phandle,
> bool enable);
>
> /**
> - * dpu_power_clk_set_rate() - set the clock rate
> - * @pdata: power handle containing the resources
> - * @clock_name: clock name which needs rate update.
> - * @rate: Requested rate.
> - *
> - * Return: error code.
> - */
> -int dpu_power_clk_set_rate(struct dpu_power_handle *pdata, char *clock_name,
> - u64 rate);
> -
> -/**
> - * dpu_power_clk_get_rate() - get the clock rate
> - * @pdata: power handle containing the resources
> - * @clock_name: clock name to get the rate
> - *
> - * Return: current clock rate
> - */
> -u64 dpu_power_clk_get_rate(struct dpu_power_handle *pdata, char *clock_name);
> -
> -/**
> - * dpu_power_clk_get_max_rate() - get the maximum clock rate
> - * @pdata: power handle containing the resources
> - * @clock_name: clock name to get the max rate.
> - *
> - * Return: maximum clock rate or 0 if not found.
> - */
> -u64 dpu_power_clk_get_max_rate(struct dpu_power_handle *pdata,
> - char *clock_name);
> -
> -/**
> - * dpu_power_clk_get_clk() - get the clock
> - * @pdata: power handle containing the resources
> - * @clock_name: clock name to get the clk pointer.
> - *
> - * Return: Pointer to clock
> - */
> -struct clk *dpu_power_clk_get_clk(struct dpu_power_handle *phandle,
> - char *clock_name);
> -
> -/**
> * dpu_power_data_bus_set_quota() - set data bus quota for power client
> * @phandle: power handle containing the resources
> * @client: client information to set quota
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
