This commit adds support for KOE's 5.7" display. Signed-off-by: Lukasz Majewski <lukma@xxxxxxx> --- .../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt new file mode 100644 index 000000000000..be7ac666807b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + +Required properties: +- compatible: should be "koe,tx14d24vm1bpa" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage + +Required nodes: +- port: Parallel port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX53 based board + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + +Then one needs to extend the dispX node: + + lcd_display: disp1 { + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index d9984bdb5bb5..103b43ce7dee 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1268,6 +1268,29 @@ static const struct panel_desc innolux_zj070na_01p = { }, }; +static const struct display_timing koe_tx14d24vm1bpa_timing = { + .pixelclock = { 5580000, 5850000, 6200000 }, + .hactive = { 320, 320, 320 }, + .hfront_porch = { 30, 30, 30 }, + .hback_porch = { 30, 30, 30 }, + .hsync_len = { 1, 5, 17 }, + .vactive = { 240, 240, 240 }, + .vfront_porch = { 6, 6, 6 }, + .vback_porch = { 5, 5, 5 }, + .vsync_len = { 1, 2, 11 }, + .flags = DISPLAY_FLAGS_DE_HIGH, +}; + +static const struct panel_desc koe_tx14d24vm1bpa = { + .timings = &koe_tx14d24vm1bpa_timing, + .num_timings = 1, + .bpc = 6, + .size = { + .width = 115, + .height = 86, + }, +}; + static const struct display_timing koe_tx31d200vm0baa_timing = { .pixelclock = { 39600000, 43200000, 48000000 }, .hactive = { 1280, 1280, 1280 }, @@ -2204,6 +2227,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "innolux,zj070na-01p", .data = &innolux_zj070na_01p, }, { + .compatible = "koe,tx14d24vm1bpa", + .data = &koe_tx14d24vm1bpa, + }, { .compatible = "koe,tx31d200vm0baa", .data = &koe_tx31d200vm0baa, }, { -- 2.11.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel