RE: [PATCH v3 02/40] drm: HDMI and DP specific HDCP2.2 defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>-----Original Message-----
>From: dri-devel [mailto:dri-devel-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of
>Ramalingam C
>Sent: Tuesday, April 3, 2018 7:27 PM
>To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
>seanpaul@xxxxxxxxxxxx; daniel@xxxxxxxx; chris@xxxxxxxxxxxxxxxxxx;
>jani.nikula@xxxxxxxxxxxxxxx; Winkler, Tomas <tomas.winkler@xxxxxxxxx>;
>Usyskin, Alexander <alexander.usyskin@xxxxxxxxx>
>Cc: Vivi, Rodrigo <rodrigo.vivi@xxxxxxxxx>
>Subject: [PATCH v3 02/40] drm: HDMI and DP specific HDCP2.2 defines
>
>In preparation for implementing HDCP2.2 in I915, this patch adds HDCP register
>definitions for HDMI and DP HDCP adaptations.

I believe we can just keep this message generic at drm layer, instead of calling out
i915 specifically. Currently it may be enabled for i915, but it will used for other
drivers as well in future.

>
>HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where are

Make it "where as".

>HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h.
>
>v2:
>  bit_field definitions are replaced by macros. [Tomas and Jany]

Typo in "Jani's" name.

>v3:
>  No Changes.
>
>Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
>---
> include/drm/drm_dp_helper.h | 54
>+++++++++++++++++++++++++++++++++++++++++++++
> include/drm/drm_hdcp.h      | 29 ++++++++++++++++++++++++
> 2 files changed, 83 insertions(+)
>
>diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index
>4de97e94ef9d..2185b3a88911 100644
>--- a/include/drm/drm_dp_helper.h
>+++ b/include/drm/drm_dp_helper.h
>@@ -887,6 +887,60 @@
> #define DP_AUX_HDCP_KSV_FIFO		0x6802C
> #define DP_AUX_HDCP_AINFO		0x6803B
>
>+/**
>+ * DP HDCP2.2 parameter offsets in DPCD address space  */

Rectify the comment style

>+#define DP_HDCP_2_2_REG_RTX_OFFSET		0x69000
>+#define DP_HDCP_2_2_REG_TXCAPS_OFFSET		0x69008
>+#define DP_HDCP_2_2_REG_CERT_RX_OFFSET		0x6900B
>+#define DP_HDCP_2_2_REG_RRX_OFFSET		0x69215
>+#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET		0x6921D
>+#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET		0x69220
>+#define DP_HDCP_2_2_REG_EKH_KM_OFFSET		0x692A0
>+#define DP_HDCP_2_2_REG_M_OFFSET		0x692B0
>+#define DP_HDCP_2_2_REG_HPRIME_OFFSET		0x692C0
>+#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET	0x692E0
>+#define DP_HDCP_2_2_REG_RN_OFFSET		0x692F0
>+#define DP_HDCP_2_2_REG_LPRIME_OFFSET		0x692F8
>+#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET		0x69318
>+#define	DP_HDCP_2_2_REG_RIV_OFFSET		0x69328
>+#define DP_HDCP_2_2_REG_RXINFO_OFFSET		0x69330
>+#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET	0x69332
>+#define DP_HDCP_2_2_REG_VPRIME_OFFSET		0x69335
>+#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET	0x69345
>+#define DP_HDCP_2_2_REG_V_OFFSET		0x693E0
>+#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET	0x693F0
>+#define DP_HDCP_2_2_REG_K_OFFSET		0x693F3
>+#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET	0x693F5
>+#define DP_HDCP_2_2_REG_MPRIME_OFFSET		0x69473
>+#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET		0x69493
>+#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET	0x69494

This is not matching to the spec. Seems reserved in spec.

>+#define DP_HDCP_2_2_REG_DBG_OFFSET		0x69518
>+
>+/**
>+ * DP HDCP message start offsets in DPCD address space  */

Rectify comment style

>+#define DP_HDCP_2_2_AKE_INIT_OFFSET
>	DP_HDCP_2_2_REG_RTX_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET
>	DP_HDCP_2_2_REG_CERT_RX_OFFSET
>+#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET
>	DP_HDCP_2_2_REG_EKPUB_KM_OFFSET
>+#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET
>	DP_HDCP_2_2_REG_EKH_KM_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET
>	DP_HDCP_2_2_REG_HPRIME_OFFSET
>+#define DP_HDCP_2_2_AKE_SEND_PARING_INFO_OFFSET

Typo in pairing

>	DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET
>+#define DP_HDCP_2_2_LC_INIT_OFFSET
>	DP_HDCP_2_2_REG_RN_OFFSET
>+#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET
>	DP_HDCP_2_2_REG_LPRIME_OFFSET
>+#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET
>	DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
>+#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET
>	DP_HDCP_2_2_REG_RXINFO_OFFSET
>+#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET
>	DP_HDCP_2_2_REG_V_OFFSET
>+#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET
>	DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
>+#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET
>	DP_HDCP_2_2_REG_MPRIME_OFFSET
>+
>+#define HDCP_2_2_DP_RXSTATUS_LEN		1
>+#define HDCP_2_2_DP_RXSTATUS_READY(x)		(x & BIT(0))
>+#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x)		(x & BIT(1))
>+#define HDCP_2_2_DP_RXSTATUS_PAIRING(x)		(x & BIT(2))
>+#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x)	(x & BIT(3))
>+#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x)	(x & BIT(4))
>+
> /* DP 1.2 Sideband message defines */
> /* peer device type - DP 1.2a Table 2-92 */

Make it multi line comment.

> #define DP_PEER_DEVICE_NONE		0x0
>diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h index
>5e0a5ed1a08e..f3f28414b189 100644
>--- a/include/drm/drm_hdcp.h
>+++ b/include/drm/drm_hdcp.h
>@@ -221,4 +221,33 @@ struct hdcp2_dp_errata_stream_type {
> 	uint8_t			stream_type;
> } __packed;
>
>+/* HDCP2.2 TIMEOUTs in mSec */
>+#define HDCP_2_2_CERT_TIMEOUT			100
>+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT	1000
>+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT		200
>+#define HDCP_2_2_PAIRING_TIMEOUT		200
>+#define	HDCP_2_2_HDMI_LPRIME_TIMEOUT		20
>+#define HDCP_2_2_DP_LPRIME_TIMEOUT		7
>+#define HDCP_2_2_RECVID_LIST_TIMEOUT		3000
>+#define HDCP_2_2_STREAM_READY_TIMEOUT		100
>+
>+/* HDMI HDCP2.2 Register Offsets */
>+#define HDCP_2_2_HDMI_REG_VER_OFFSET		0x50
>+#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET		0x60
>+#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET	0x70
>+#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET		0x80
>+#define HDCP_2_2_HDMI_REG_DBG_OFFSET		0xC0
>+
>+#define HDCP_2_2_HDMI_SUPPORT_MASK		BIT(2)
>+#define HDCP_2_2_RXCAPS_VERSION_VAL		0x2
>+
>+#define HDCP_2_2_RX_CAPS_VERSION_VAL		0x02
>+#define HDCP_2_2_SEQ_NUM_MAX			0xFFFFFF
>+#define	HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN	200
>+
>+#define HDCP_2_2_HDMI_RXSTATUS_LEN		2
>+#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x)	(x & 0x3)

This seems to be a 10 bit field. Please check or am I missing something ?

>+#define HDCP_2_2_HDMI_RXSTATUS_READY(x)		(x & BIT(2))

It should be bit 10. Add a comment to explain so that it gets easier to match to spec.

>+#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)	(x & BIT(3))

Same as above. May be add a generic comment.

>+
> #endif
>--
>2.7.4
>
>_______________________________________________
>dri-devel mailing list
>dri-devel@xxxxxxxxxxxxxxxxxxxxx
>https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux