On Lu, 2018-05-07 at 11:50 -0500, Rob Herring wrote: > On Thu, May 03, 2018 at 05:26:02PM +0300, Robert Chiras wrote: > > > > Signed-off-by: Robert Chiras <robert.chiras@xxxxxxx> > > --- > > .../bindings/display/panel/raydium,rm67191.txt | 38 > > ++++++++++++++++++++++ > > 1 file changed, 38 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > > > > diff --git > > a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > new file mode 100644 > > index 0000000..0fe6d4b > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > @@ -0,0 +1,38 @@ > > +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol > > + > > +Required properties: > > +- compatible: "raydium,rm67191" > > +- reg: virtual channel for MIPI-DSI > > protocol > > + must be <0> > > +- dsi-lanes: number of DSI lanes to be used > > + must be <3> or <4> > > +- port: input port node with endpoint definition > > as > > + defined in > > Documentation/devicetree/bindings/graph.txt; > > + the input port should be connected to a > > MIPI-DSI device > > + driver > > + > > +Optional properties: > > +- reset-gpio: a GPIO spec for the RST_B GPIO pin > > +- pinctrl-0 phandle to the pin settings for the > > reset pin > > +- panel-width-mm: physical panel width [mm] > > +- panel-height-mm: physical panel height [mm] > width-mm and height-mm are the common property names. OK, I will change them accordingly. > > > > > + > > +[1]: Documentation/devicetree/bindings/display/display-timing.txt > Footnote to what? In the previous version it had an optional display-timing property. I removed it in this version, but I forgot to remove the footnote. I will remove this in the next version of the patch-set. > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
