Hi Reviewers ...
Comments inline ...
On 03/05/18 09:44, Kieran Bingham wrote:
> Calculate the top and bottom fields for the interlaced frames and
> utilise the extended display list command feature to implement the
> auto-field operations. This allows the DU to update the VSP2 registers
> dynamically based upon the currently processing field.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> ---
> v3:
> - Pass DL through partition calls to allow autocmd's to be retrieved
This change itself could actually be folded into the TLB-Optimise series, but I
posted this in v3 here to show why it is necessary (currently).
I'll take suggestions on alternative implementations here too ...
> - Document interlaced field in struct vsp1_du_atomic_config
>
> v2:
> - fix erroneous BIT value which enabled interlaced
> - fix field handling at frame_end interrupt
>
> drivers/media/platform/vsp1/vsp1_dl.c | 10 +++-
> drivers/media/platform/vsp1/vsp1_drm.c | 13 +++-
> drivers/media/platform/vsp1/vsp1_entity.c | 3 +-
> drivers/media/platform/vsp1/vsp1_entity.h | 2 +-
> drivers/media/platform/vsp1/vsp1_regs.h | 1 +-
> drivers/media/platform/vsp1/vsp1_rpf.c | 73 +++++++++++++++++++++++-
> drivers/media/platform/vsp1/vsp1_rwpf.h | 1 +-
> drivers/media/platform/vsp1/vsp1_uds.c | 1 +-
> drivers/media/platform/vsp1/vsp1_video.c | 2 +-
> drivers/media/platform/vsp1/vsp1_wpf.c | 1 +-
> include/media/vsp1.h | 2 +-
> 11 files changed, 103 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c
> index 6366a1fc92b9..f3e75cff5ab3 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.c
> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
> @@ -906,6 +906,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
> */
> unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
> {
> + struct vsp1_device *vsp1 = dlm->vsp1;
> + u32 status = vsp1_read(vsp1, VI6_STATUS);
> unsigned int flags = 0;
>
> spin_lock(&dlm->lock);
> @@ -931,6 +933,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
> goto done;
>
> /*
> + * Progressive streams report only TOP fields. If we have a BOTTOM
> + * field, we are interlaced, and expect the frame to complete on the
> + * next frame end interrupt.
> + */
> + if (status & VI6_STATUS_FLD_STD(dlm->index))
> + goto done;
> +
> + /*
> * The device starts processing the queued display list right after the
> * frame end interrupt. The display list thus becomes active.
> */
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index 7714be7f50af..cc29c9d96bb7 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -556,7 +556,7 @@ static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe)
> vsp1_entity_route_setup(entity, pipe, dlb);
> vsp1_entity_configure_stream(entity, pipe, dlb);
> vsp1_entity_configure_frame(entity, pipe, dl, dlb);
> - vsp1_entity_configure_partition(entity, pipe, dlb);
> + vsp1_entity_configure_partition(entity, pipe, dl, dlb);
This change, and other changes to vsp1_entity_configure_partition() could be
performed in tlb-optimise when the corresponding change is made to
vsp1_entity_configure_frame()
> }
>
> vsp1_dl_list_commit(dl, drm_pipe->force_brx_release);
> @@ -811,6 +811,17 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
> return -EINVAL;
> }
>
> + if (!(vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) && cfg->interlaced) {
> + /*
> + * Interlaced support requires extended display lists to
> + * provide the auto-fld feature with the DU.
> + */
> + dev_dbg(vsp1->dev, "Interlaced unsupported on this output\n");
> + return -EINVAL;
> + }
> +
> + rpf->interlaced = cfg->interlaced;
> +
> rpf->fmtinfo = fmtinfo;
> rpf->format.num_planes = fmtinfo->planes;
> rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
> diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c
> index 7b29ef3532fc..da276a85aa95 100644
> --- a/drivers/media/platform/vsp1/vsp1_entity.c
> +++ b/drivers/media/platform/vsp1/vsp1_entity.c
> @@ -88,10 +88,11 @@ void vsp1_entity_configure_frame(struct vsp1_entity *entity,
>
> void vsp1_entity_configure_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> + struct vsp1_dl_list *dl,
Same here
> struct vsp1_dl_body *dlb)
> {
> if (entity->ops->configure_partition)
> - entity->ops->configure_partition(entity, pipe, dlb);
> + entity->ops->configure_partition(entity, pipe, dl, dlb);
> }
>
> /* -----------------------------------------------------------------------------
> diff --git a/drivers/media/platform/vsp1/vsp1_entity.h b/drivers/media/platform/vsp1/vsp1_entity.h
> index f329c69731d1..97acb7795cf1 100644
> --- a/drivers/media/platform/vsp1/vsp1_entity.h
> +++ b/drivers/media/platform/vsp1/vsp1_entity.h
> @@ -83,6 +83,7 @@ struct vsp1_entity_operations {
> struct vsp1_dl_list *, struct vsp1_dl_body *);
> void (*configure_partition)(struct vsp1_entity *,
> struct vsp1_pipeline *,
> + struct vsp1_dl_list *,
Same here
> struct vsp1_dl_body *);
> unsigned int (*max_width)(struct vsp1_entity *, struct vsp1_pipeline *);
> void (*partition)(struct vsp1_entity *, struct vsp1_pipeline *,
> @@ -163,6 +164,7 @@ void vsp1_entity_configure_frame(struct vsp1_entity *entity,
>
> void vsp1_entity_configure_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> + struct vsp1_dl_list *dl,
Same here
> struct vsp1_dl_body *dlb);
>
> struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad);
> diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
> index d054767570c1..a2ac65cc5155 100644
> --- a/drivers/media/platform/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/vsp1/vsp1_regs.h
> @@ -28,6 +28,7 @@
> #define VI6_SRESET_SRTS(n) (1 << (n))
>
> #define VI6_STATUS 0x0038
> +#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28))
> #define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8))
>
> #define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
> diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c
> index a948670121a4..c1de22398423 100644
> --- a/drivers/media/platform/vsp1/vsp1_rpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_rpf.c
> @@ -20,6 +20,20 @@
> #define RPF_MAX_WIDTH 8190
> #define RPF_MAX_HEIGHT 8190
>
> +/* Pre extended display list command data structure */
> +struct vsp1_extcmd_auto_fld_body {
> + u32 top_y0;
> + u32 bottom_y0;
> + u32 top_c0;
> + u32 bottom_c0;
> + u32 top_c1;
> + u32 bottom_c1;
> + u32 reserved0;
> + u32 reserved1;
> +} __packed;
> +
> +#define VSP1_DL_EXT_AUTOFLD_INT BIT(0)
> +
> /* -----------------------------------------------------------------------------
> * Device Access
> */
> @@ -64,6 +78,14 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
> pstride |= format->plane_fmt[1].bytesperline
> << VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
>
> + /*
> + * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
> + * of pstride by 2 is conveniently OK here as we are multiplying both
> + * values.
> + */
> + if (rpf->interlaced)
> + pstride *= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
>
> /* Format */
> @@ -100,6 +122,9 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
> top = compose->top;
> }
>
> + if (rpf->interlaced)
> + top /= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
> (left << VI6_RPF_LOC_HCOORD_SHIFT) |
> (top << VI6_RPF_LOC_VCOORD_SHIFT));
> @@ -169,6 +194,31 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
>
> }
>
> +static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
> + struct vsp1_dl_ext_cmd *cmd)
> +{
> + const struct v4l2_pix_format_mplane *format = &rpf->format;
> + struct vsp1_extcmd_auto_fld_body *auto_fld = cmd->data;
> + u32 offset_y, offset_c;
> +
> + /* Re-index our auto_fld to match the current RPF */
> + auto_fld = &auto_fld[rpf->entity.index];
> +
> + auto_fld->top_y0 = rpf->mem.addr[0];
> + auto_fld->top_c0 = rpf->mem.addr[1];
> + auto_fld->top_c1 = rpf->mem.addr[2];
> +
> + offset_y = format->plane_fmt[0].bytesperline;
> + offset_c = format->plane_fmt[1].bytesperline;
> +
> + auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
> + auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
> + auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
> +
> + cmd->flags |= VSP1_DL_EXT_AUTOFLD_INT;
> + cmd->flags |= BIT(16 + rpf->entity.index);
> +}
> +
> static void rpf_configure_frame(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> struct vsp1_dl_list *dl,
> @@ -186,11 +236,13 @@ static void rpf_configure_frame(struct vsp1_entity *entity,
>
> static void rpf_configure_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> + struct vsp1_dl_list *dl,
> struct vsp1_dl_body *dlb)
> {
> struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
> struct vsp1_rwpf_memory mem = rpf->mem;
> struct vsp1_device *vsp1 = rpf->entity.vsp1;
> + struct vsp1_dl_ext_cmd *cmd;
> const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
> const struct v4l2_pix_format_mplane *format = &rpf->format;
> struct v4l2_rect crop;
> @@ -219,6 +271,11 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
> crop.left += pipe->partition->rpf.left;
> }
>
> + if (rpf->interlaced) {
> + crop.height = round_down(crop.height / 2, fmtinfo->vsub);
> + crop.top = round_down(crop.top / 2, fmtinfo->vsub);
> + }
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
> (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
> (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
> @@ -247,11 +304,21 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
> fmtinfo->swap_uv)
> swap(mem.addr[1], mem.addr[2]);
>
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + /*
> + * Interlaced pipelines will use the extended pre-cmd to process
> + * SRCM_ADDR_{Y,C0,C1}
> + */
> + if (rpf->interlaced) {
> + cmd = vsp1_dlm_get_autofld_cmd(dl);
> + vsp1_rpf_configure_autofld(rpf, cmd);
Technically - if (rpf->interlaced) can only evaluate to true on DRM pipelines,
which don't use the image partitioning. So it might be possible to argue that
the vsp1_rpf_configure_autofld() call should be done in rpf_configure_frame().
Except I think it's reasonable to consider that the addresses and configuration
of the frame are still just the 'first and only partition' - thus I think it's
better to leave this here - and instead ensure that the requried DL is passed
through.
Unless there's a better way to get the cmd object ?
> + } else {
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + }
> }
>
> +
> static void rpf_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> struct vsp1_partition *partition,
> diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.h b/drivers/media/platform/vsp1/vsp1_rwpf.h
> index 70742ecf766f..8d6e42f27908 100644
> --- a/drivers/media/platform/vsp1/vsp1_rwpf.h
> +++ b/drivers/media/platform/vsp1/vsp1_rwpf.h
> @@ -42,6 +42,7 @@ struct vsp1_rwpf {
> struct v4l2_pix_format_mplane format;
> const struct vsp1_format_info *fmtinfo;
> unsigned int brx_input;
> + bool interlaced;
>
> unsigned int alpha;
>
> diff --git a/drivers/media/platform/vsp1/vsp1_uds.c b/drivers/media/platform/vsp1/vsp1_uds.c
> index 35f99844c19c..c20c84b54936 100644
> --- a/drivers/media/platform/vsp1/vsp1_uds.c
> +++ b/drivers/media/platform/vsp1/vsp1_uds.c
> @@ -304,6 +304,7 @@ static void uds_configure_stream(struct vsp1_entity *entity,
>
> static void uds_configure_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> + struct vsp1_dl_list *dl,
> struct vsp1_dl_body *dlb)
> {
> struct vsp1_uds *uds = to_uds(&entity->subdev);
> diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
> index 2cbcc20fe980..b2109225cb2d 100644
> --- a/drivers/media/platform/vsp1/vsp1_video.c
> +++ b/drivers/media/platform/vsp1/vsp1_video.c
> @@ -384,7 +384,7 @@ static void vsp1_video_pipeline_run_partition(struct vsp1_pipeline *pipe,
> pipe->partition = &pipe->part_table[partition];
>
> list_for_each_entry(entity, &pipe->entities, list_pipe)
> - vsp1_entity_configure_partition(entity, pipe, dlb);
> + vsp1_entity_configure_partition(entity, pipe, dl, dlb);
> }
>
> static void vsp1_video_pipeline_run(struct vsp1_pipeline *pipe)
> diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c
> index b61d05aaadf2..ea1d226371b2 100644
> --- a/drivers/media/platform/vsp1/vsp1_wpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_wpf.c
> @@ -352,6 +352,7 @@ static void wpf_configure_frame(struct vsp1_entity *entity,
>
> static void wpf_configure_partition(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> + struct vsp1_dl_list *dl,
> struct vsp1_dl_body *dlb)
> {
> struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 678c24de1ac6..c10883f30980 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -50,6 +50,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> * @dst: destination rectangle on the display (integer coordinates)
> * @alpha: alpha value (0: fully transparent, 255: fully opaque)
> * @zpos: Z position of the plane (from 0 to number of planes minus 1)
> + * @interlaced: true for interlaced pipelines
> */
> struct vsp1_du_atomic_config {
> u32 pixelformat;
> @@ -59,6 +60,7 @@ struct vsp1_du_atomic_config {
> struct v4l2_rect dst;
> unsigned int alpha;
> unsigned int zpos;
> + bool interlaced;
> };
>
> /**
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
