Hey,
Op 30-04-18 om 16:56 schreef Daniel Vetter:
> On Mon, Apr 30, 2018 at 04:55:24PM +0200, Daniel Vetter wrote:
>> On Sat, Apr 28, 2018 at 12:07:04AM +0300, Laurent Pinchart wrote:
>>> Hi Daniel,
>>>
>>> (Removing the linux-media mailing list from CC as it is out of scope)
>>>
>>> You enquired on IRC whether this patch series passes the igt CRC tests.
>>>
>>> # ./kms_pipe_crc_basic --run-subtest read-crc-pipe-A
>>> IGT-Version: 1.22-gf447f5fc531d (aarch64) (Linux: 4.17.0-rc1-00085-g56e849d93cc9 aarch64)
>>> read-crc-pipe-A: Testing connector LVDS-1 using pipe A
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Test assertion failure function igt_pipe_crc_start, file igt_debugfs.c:764:
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Failed assertion: pipe_crc->crc_fd != -1
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Last errno: 5, Input/output error
>>> Stack trace:
>>> Subtest read-crc-pipe-A failed.
>>> **** DEBUG ****
>>> (kms_pipe_crc_basic:1638) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes)
>>> (kms_pipe_crc_basic:1638) INFO: read-crc-pipe-A: Testing connector LVDS-1 using pipe A
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: LVDS-1: set_pipe(A)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: LVDS-1: Selecting pipe A
>>> (kms_pipe_crc_basic:1638) DEBUG: Clearing the fb with color (0.00,1.00,0.00)
>>> (kms_pipe_crc_basic:1638) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=768, format=0x34325258, tiling=0x0, size=0)
>>> (kms_pipe_crc_basic:1638) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=4096)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: A.0: plane_set_fb(140)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: A.0: plane_set_size (1024x768)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: A.0: fb_set_position(0,0)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: A.0: fb_set_size(1024x768)
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: commit {
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: LVDS-1: SetCrtc pipe A, fb 140, src (0, 0), mode 1024x768
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetCrtc pipe A, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe A, plane 2, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe A, plane 3, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe A, plane 4, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetCrtc pipe B, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe B, plane 1, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe B, plane 2, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe B, plane 3, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe B, plane 4, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetCrtc pipe C, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe C, plane 1, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe C, plane 2, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe C, plane 3, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe C, plane 4, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetCrtc pipe D, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetCrtc pipe D, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe D, plane 2, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe D, plane 3, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: SetPlane pipe D, plane 4, disabling
>>> (kms_pipe_crc_basic:1638) igt-kms-DEBUG: display: }
>>> (kms_pipe_crc_basic:1638) igt-debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
>>> (kms_pipe_crc_basic:1638) igt-debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Test assertion failure function igt_pipe_crc_start, file igt_debugfs.c:764:
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Failed assertion: pipe_crc->crc_fd != -1
>>> (kms_pipe_crc_basic:1638) igt-debugfs-CRITICAL: Last errno: 5, Input/output error
>>> (kms_pipe_crc_basic:1638) igt-core-INFO: Stack trace:
>>> **** END ****
>>> Subtest read-crc-pipe-A: FAIL (0.061s)
>>>
>>> I think the answer is no, but I don't think it's the fault of this patch
>>> series. Opening the CRC data file returns -EIO because the CRTC is not active,
>>> and I'm trying to find out why that is the case. The debug log shows a commit
>>> that seems strange to me, enabling pipe A and immediately disabling right
>>> afterwards. After some investigation I believe that this is caused by sharing
>>> primary planes between CRTCs.
>>>
>>> The R-Car DU groups CRTCs by two and shares 5 planes between the two CRTCs of
>>> the group. This specific SoC has two groups of two CRTCs, but that's not
>>> relevant here, so we can ignore pipes C and D.
>>>
>>> Pipes A and B thus shared 5 planes that I will number 0 to 4 for simplicity.
>>> The driver sets plane 0 as the primary plane for CRTC A and plane 1 as the
>>> primary plane for CRTC B. Planes 2, 3 and 4 are created as overlay planes.
>>>
>>> When igt iterates over all planes for pipe A, it will first encounter plane 0
>>> that has a framebuffer, and thus enables the pipe. It then iterates over
>>> plane 1, recognizes it as a primary plane without a framebuffer, and thus
>>> disables the pipe. Planes 2, 3 and 4 are recognized as overlay planes and thus
>>> don't affect the pipe active state. Pipe B is handled the same way, and igt
>>> disables it twice as planes 0 and 1 are primary.
>>>
>>> I don't know if the fault here is with igt that doesn't properly support this
>>> architecture, or with the driver that shouldn't have two primary planes
>>> available for a CRTC. In the former case, I'm not sure how to fix it, as I'm
>>> not familiar enough with igt to rearchitecture the commit helpers. In the
>>> latter case, how would you recommend fixing it on the driver side ?
>> I guess thus far no one did run igt on a chip which did have reassignable
>> primary planes. The problem here is that it's pretty hard to figure out
>> which one is the real primary plane, since with possible CRTCs you could
>> have multiple primary planes on 1 CRTC. There's no property or anything
>> that explicitly tells you this. Two fixes:
>>
>> 1. Change drivers to limit primary planes to 1 crtc. Same for cursor
>> overlays. There's probably other userspace than igt that gets confused
>> by this, but this has the ugly downside that we artifically limit plane
>> usage - if only 1 CRTC is on, we want to use all the available planes
>> on that one.
>>
>> 2. Add some implicit or explicit uapi to allow userspace to figure out
>> which primary plane is the primary plane for this crtc.
>>
>> a) Explicit option: We add a PRIMARY_ID property (and CURSOR_ID prop
>> while at it) on the CRTC which points at the primary/cursor plane.
>>
>> b) Implicit option: We require primary planes are assigned to CRTC in the
>> same order as they're created. So first primary plane you encouter
>> is the one for the first CRTC, 2nd primary plane is the one for the
>> 2nd CRTC and so on. If we go with this we probably should add a bit
>> of code to the kernel to check that invariant (by making sure the
>> primary plane has the corresponding CRTC included in its
>> possible_crtc mask).
>>
>> Either way igt needs to be patched to not treat any primary plane that
>> could work on a CRTC as the primary plane for that CRTC.
>>
>> Personally I'm leaning towards 2b).
> Adding Maarten and igt-dev.
We should first make the plane array global, instead of per crtc.
That means removing plane->pipe and plane->index.
And pipe_obj->planes and pipe_obj->n_planes need to be gone too. I think it's
easiest to make
There is one problem. Most of the tests are not aware of the limitations.
If we make the plane array global it should be possible to make
a for_each_possible_plane_on_pipe enumerate all planes that could be assigned
to a certain pipe. We need to sort by z order somehow, but if we then add
igt_plane_set_pipe() which updates the IGT_PLANE_CRTC_ID property, we should
be good.
Only thing we don't see is how the default crtc->primary and crtc->cursor are
assigned. For the calls with COMMIT_LEGACY we need to know the mappings, but
I don't think the kernel exposes them?
I guess we could put it in a FIFO way, first enumerated plane with PRIMARY type
is bound to the first crtc, same for cursor.
This will hopefully allow legacy tests to keep working, while atomic plane aware
tests will be able to use all planes.
~Maarten
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
