It is a bit unorthodox to just include a file in the middle
of a another DTS file, it breaks the pattern from other device
trees and also makes it really hard to reference things
across the files with phandles.
Restructure the include for the Versatile Express motherboards
to happen at the top of the file, reference the target nodes
directly, and indent the motherboard .dtsi files to reflect
their actual depth in the hiearchy.
This is a purely syntactic change that result in the same
DTB files from the DTS/DTSI files.
Cc: Robin Murphy <robin.murphy@xxxxxxx>
Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
Cc: Mali DP Maintainers <malidp@xxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 706 +++++++++++----------
arch/arm/boot/dts/vexpress-v2m.dtsi | 704 ++++++++++----------
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 3 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 5 +-
arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 5 +-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 5 +-
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 5 +-
7 files changed, 718 insertions(+), 715 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 35714ff6f467..7b8ff5b3b912 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -17,426 +17,430 @@
* CHANGES TO vexpress-v2m.dtsi!
*/
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
+/ {
+ smb@8000000 {
+ motherboard {
+ model = "V2M-P1";
+ arm,hbi = <0x190>;
+ arm,vexpress,site = <0>;
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
- psram@1,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <1 0x00000000 0x02000000>;
- bank-width = <4>;
- };
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
- v2m_video_ram: vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
+ psram@1,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <1 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
- ethernet@2,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
+ v2m_video_ram: vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
- usb@2,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <2 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
+ ethernet@2,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
- iofpga@3,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
+ usb@2,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <2 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
- v2m_sysreg: sysreg@10000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
+ iofpga@3,00000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
- v2m_led_gpios: sys_led {
- compatible = "arm,vexpress-sysreg,sys_led";
- gpio-controller;
- #gpio-cells = <2>;
- };
+ v2m_sysreg: sysreg@10000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
- v2m_mmc_gpios: sys_mci {
- compatible = "arm,vexpress-sysreg,sys_mci";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_led_gpios: sys_led {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
- v2m_flash_gpios: sys_flash {
- compatible = "arm,vexpress-sysreg,sys_flash";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_sysctl: sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- };
- v2m_sysctl: sysctl@20000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@30000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x030000 0x1000>;
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@30000 {
- compatible = "arm,versatile-i2c";
- reg = <0x030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
- pcie-switch@60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
+ aaci@40000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- aaci@40000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
+ mmci@50000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
- mmci@50000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
+ kmi@60000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@60000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ kmi@70000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@70000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ v2m_serial0: uart@90000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial0: uart@90000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial1: uart@a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial1: uart@a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial2: uart@b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial2: uart@b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial3: uart@c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial3: uart@c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ wdt@f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&smbclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
- wdt@f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer01: timer@110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer23: timer@120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@160000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x160000 0x1000>;
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c@160000 {
- compatible = "arm,versatile-i2c";
- reg = <0x160000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
- dvi-transmitter@39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
};
- dvi-transmitter@60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
-
- rtc@170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
- compact-flash@1a0000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a0000 0x100
- 0x1a0100 0xf00>;
- reg-shift = <2>;
- };
-
- clcd@1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
- port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
+ compact-flash@1a0000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a0000 0x100
+ 0x1a0100 0xf00>;
+ reg-shift = <2>;
};
- panel {
- compatible = "panel-dpi";
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&smbclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
};
};
};
- };
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ v2m_fixed_3v3: fixed-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
- leds {
- compatible = "gpio-leds";
+ leds {
+ compatible = "gpio-leds";
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
+ user1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
+ user2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
+ user3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
+ user4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
+ user5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
+ user6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
+ user7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
+ user8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
};
- };
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
};
};
};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index b0021a816028..9cd5e146abd5 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -18,425 +18,429 @@
* CHANGES TO vexpress-v2m-rs1.dtsi!
*/
- motherboard {
- model = "V2M-P1";
- arm,hbi = <0x190>;
- arm,vexpress,site = <0>;
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <1 0x00000000 0x04000000>;
- bank-width = <4>;
- };
+/ {
+ smb@4000000 {
+ motherboard {
+ model = "V2M-P1";
+ arm,hbi = <0x190>;
+ arm,vexpress,site = <0>;
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
- psram@2,00000000 {
- compatible = "arm,vexpress-psram", "mtd-ram";
- reg = <2 0x00000000 0x02000000>;
- bank-width = <4>;
- };
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <1 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
- v2m_video_ram: vram@3,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <3 0x00000000 0x00800000>;
- };
+ psram@2,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <2 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
- ethernet@3,02000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
- reg = <3 0x02000000 0x10000>;
- interrupts = <15>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&v2m_fixed_3v3>;
- vddvario-supply = <&v2m_fixed_3v3>;
- };
+ v2m_video_ram: vram@3,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <3 0x00000000 0x00800000>;
+ };
- usb@3,03000000 {
- compatible = "nxp,usb-isp1761";
- reg = <3 0x03000000 0x20000>;
- interrupts = <16>;
- port1-otg;
- };
+ ethernet@3,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <3 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
- iofpga@7,00000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 7 0 0x20000>;
+ usb@3,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <3 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
- v2m_sysreg: sysreg@0 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x00000 0x1000>;
+ iofpga@7,00000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 7 0 0x20000>;
- v2m_led_gpios: sys_led {
- compatible = "arm,vexpress-sysreg,sys_led";
- gpio-controller;
- #gpio-cells = <2>;
- };
+ v2m_sysreg: sysreg@0 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x00000 0x1000>;
- v2m_mmc_gpios: sys_mci {
- compatible = "arm,vexpress-sysreg,sys_mci";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_led_gpios: sys_led {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
- v2m_flash_gpios: sys_flash {
- compatible = "arm,vexpress-sysreg,sys_flash";
- gpio-controller;
- #gpio-cells = <2>;
+ v2m_sysctl: sysctl@1000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x01000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- };
- v2m_sysctl: sysctl@1000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x01000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
- };
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@2000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x02000 0x1000>;
- /* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@2000 {
- compatible = "arm,versatile-i2c";
- reg = <0x02000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
- pcie-switch@60 {
- compatible = "idt,89hpes32h8";
- reg = <0x60>;
+ aaci@4000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x04000 0x1000>;
+ interrupts = <11>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
- aaci@4000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x04000 0x1000>;
- interrupts = <11>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
+ mmci@5000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x05000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
- mmci@5000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x05000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_mmc_gpios 0 0>;
- wp-gpios = <&v2m_mmc_gpios 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "mclk", "apb_pclk";
- };
+ kmi@6000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x06000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@6000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x06000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ kmi@7000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x07000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
- kmi@7000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x07000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&smbclk>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
+ v2m_serial0: uart@9000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x09000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial0: uart@9000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x09000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial1: uart@a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial1: uart@a000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial2: uart@b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial2: uart@b000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ v2m_serial3: uart@c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
- v2m_serial3: uart@c000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_oscclk2>, <&smbclk>;
- clock-names = "uartclk", "apb_pclk";
- };
+ wdt@f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&smbclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
- wdt@f000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
- };
+ v2m_timer01: timer@11000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x11000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer01: timer@11000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x11000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ v2m_timer23: timer@12000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
- v2m_timer23: timer@12000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@16000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x16000 0x1000>;
- /* DVI I2C bus */
- v2m_i2c_dvi: i2c@16000 {
- compatible = "arm,versatile-i2c";
- reg = <0x16000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
- dvi-transmitter@39 {
- compatible = "sil,sii9022-tpi", "sil,sii9022";
- reg = <0x39>;
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
};
- dvi-transmitter@60 {
- compatible = "sil,sii9022-cpi", "sil,sii9022";
- reg = <0x60>;
+ rtc@17000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x17000 0x1000>;
+ interrupts = <4>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
};
- };
-
- rtc@17000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x17000 0x1000>;
- interrupts = <4>;
- clocks = <&smbclk>;
- clock-names = "apb_pclk";
- };
- compact-flash@1a000 {
- compatible = "arm,vexpress-cf", "ata-generic";
- reg = <0x1a000 0x100
- 0x1a100 0xf00>;
- reg-shift = <2>;
- };
-
- clcd@1f000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f000 0x1000>;
- interrupt-names = "combined";
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&smbclk>;
- clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
- port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- };
+ compact-flash@1a000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a000 0x100
+ 0x1a100 0xf00>;
+ reg-shift = <2>;
};
- panel {
- compatible = "panel-dpi";
+ clcd@1f000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&smbclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
};
};
};
- };
- v2m_fixed_3v3: fixed-regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ v2m_fixed_3v3: fixed-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
- leds {
- compatible = "gpio-leds";
+ leds {
+ compatible = "gpio-leds";
- user1 {
- label = "v2m:green:user1";
- gpios = <&v2m_led_gpios 0 0>;
- linux,default-trigger = "heartbeat";
- };
+ user1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
- user2 {
- label = "v2m:green:user2";
- gpios = <&v2m_led_gpios 1 0>;
- linux,default-trigger = "mmc0";
- };
+ user2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
- user3 {
- label = "v2m:green:user3";
- gpios = <&v2m_led_gpios 2 0>;
- linux,default-trigger = "cpu0";
- };
+ user3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
- user4 {
- label = "v2m:green:user4";
- gpios = <&v2m_led_gpios 3 0>;
- linux,default-trigger = "cpu1";
- };
+ user4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
- user5 {
- label = "v2m:green:user5";
- gpios = <&v2m_led_gpios 4 0>;
- linux,default-trigger = "cpu2";
- };
+ user5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
- user6 {
- label = "v2m:green:user6";
- gpios = <&v2m_led_gpios 5 0>;
- linux,default-trigger = "cpu3";
- };
+ user6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
- user7 {
- label = "v2m:green:user7";
- gpios = <&v2m_led_gpios 6 0>;
- linux,default-trigger = "cpu4";
- };
+ user7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
- user8 {
- label = "v2m:green:user8";
- gpios = <&v2m_led_gpios 7 0>;
- linux,default-trigger = "cpu5";
+ user8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
};
- };
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
};
};
};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a8ac4e2ed290..3971427a105b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA15";
@@ -278,8 +279,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index a4c7713edfcd..65a874ea66be 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA15_CA7";
@@ -584,7 +585,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -641,8 +642,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 32f1906ffecf..e5b4a7570a01 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA5s";
@@ -191,7 +192,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -248,8 +249,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 56308c1c0208..7ec3dac1f61d 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
+#include "vexpress-v2m.dtsi"
/ {
model = "V2P-CA9";
@@ -301,7 +302,7 @@
};
};
- smb@4000000 {
+ smb: smb@4000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -357,8 +358,6 @@
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
-
- /include/ "vexpress-v2m.dtsi"
};
site2: hsb@e0000000 {
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 1c9eadc2d71e..38880380e0fa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2F-1XV7 Cortex-A53x2 SMM";
@@ -129,7 +130,7 @@
};
};
- smb@8000000 {
+ smb: smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -186,7 +187,5 @@
<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
};
};
--
2.14.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
