Hi Laurent,
On 26/04/18 21:36, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Thursday, 26 April 2018 19:53:35 EEST Kieran Bingham wrote:
>> The group objects assume linear indexing, and more so always assume that
>> channel 0 of any active group is used.
>>
>> Now that the CRTC objects support non-linear indexing, adapt the groups
>> to remove assumptions that channel 0 is utilised in each group by using
>> the channel mask provided in the device structures.
>>
>> Finally ensure that the RGB routing is determined from the index of the
>> CRTC object (which represents the hardware DU channel index).
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/rcar-du/rcar_du_group.c | 14 +++++++++-----
>> drivers/gpu/drm/rcar-du/rcar_du_group.h | 2 ++
>> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 ++++-
>> 3 files changed, 15 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> b/drivers/gpu/drm/rcar-du/rcar_du_group.c index eead202c95c7..c52091fe02ba
>> 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
>> @@ -46,9 +46,12 @@ void rcar_du_group_write(struct rcar_du_group *rgrp, u32
>> reg, u32 data)
>>
>> static void rcar_du_group_setup_pins(struct rcar_du_group *rgrp)
>> {
>> - u32 defr6 = DEFR6_CODE | DEFR6_ODPM02_DISP;
>> + u32 defr6 = DEFR6_CODE;
>>
>> - if (rgrp->num_crtcs > 1)
>> + if (rgrp->channel_mask & BIT(0))
>> + defr6 |= DEFR6_ODPM02_DISP;
>> +
>> + if (rgrp->channel_mask & BIT(1))
>> defr6 |= DEFR6_ODPM12_DISP;
>
> So much cleaner with the channels mask, I like this.
:-D
>
>> rcar_du_group_write(rgrp, DEFR6, defr6);
>> @@ -80,10 +83,11 @@ static void rcar_du_group_setup_defr8(struct
>> rcar_du_group *rgrp) * On Gen3 VSPD routing can't be configured, but DPAD
>> routing
>> * needs to be set despite having a single option available.
>> */
>> - u32 crtc = ffs(possible_crtcs) - 1;
>> + unsigned int rgb_crtc = ffs(possible_crtcs) - 1;
>> + struct rcar_du_crtc *crtc = &rcdu->crtcs[rgb_crtc];
>>
>> - if (crtc / 2 == rgrp->index)
>> - defr8 |= DEFR8_DRGBS_DU(crtc);
>> + if (crtc->index / 2 == rgrp->index)
>> + defr8 |= DEFR8_DRGBS_DU(crtc->index);
>> }
>>
>> rcar_du_group_write(rgrp, DEFR8, defr8);
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.h
>> b/drivers/gpu/drm/rcar-du/rcar_du_group.h index 5e3adc6b31b5..d29a68e006a7
>> 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.h
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.h
>> @@ -25,6 +25,7 @@ struct rcar_du_device;
>> * @dev: the DU device
>> * @mmio_offset: registers offset in the device memory map
>> * @index: group index
>> + * @channel_mask: bitmask of populated DU channels in this group
>> * @num_crtcs: number of CRTCs in this group (1 or 2)
>> * @use_count: number of users of the group (rcar_du_group_(get|put))
>> * @used_crtcs: number of CRTCs currently in use
>> @@ -39,6 +40,7 @@ struct rcar_du_group {
>> unsigned int mmio_offset;
>> unsigned int index;
>>
>> + unsigned int channel_mask;
>
> Depending on how you like my suggestion in patch 05/17, this might be better
> called channels_mask.
Done.
>
>> unsigned int num_crtcs;
>> unsigned int use_count;
>> unsigned int used_crtcs;
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>> b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index 19a445fbc879..45fb554fd3c7
>> 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>> @@ -597,7 +597,10 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
>> rgrp->dev = rcdu;
>> rgrp->mmio_offset = mmio_offsets[i];
>> rgrp->index = i;
>> - rgrp->num_crtcs = min(rcdu->num_crtcs - 2 * i, 2U);
>> + /* Extract the channel mask for this group only */
>
> s/only/only./
>
>> + rgrp->channel_mask = (rcdu->info->channel_mask >> (2 * i))
>> + & GENMASK(1, 0);
>> + rgrp->num_crtcs = hweight8(rgrp->channel_mask);
>
> You could optimize this by computing it as
>
> rgrp->num_crtcs = (rgrp->channel_mask >> 1)
> | (rgrp->channel_mask & 1);
>
> as you know that only two bits at most can be set. Up to you.
Hrm... that looks like a neat trick - but I might leave this as hweight if you
don't object.
We're not on a hot-path here, and hweight is purposefully designed to count
bits, and thus self documenting ... whereas bit-magic is ... magic :D
(Don't get me wrong though I am a fan of magic :D, and I love good bit-tricks)
>
>> /*
>> * If we have more than one CRTCs in this group pre-associate
>
> With those small issues fixed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Thanks, collected.
Kieran
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
